Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.7 L+₹61,025 (2.54%)Rejected-AOC 0 0 MOH SITARGANJ PIPRI POST UKHLI KATRA SHAHJAHANPUR UTTAR PRADESH 242301 SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242301 | SHAHJAHANPUR | UTTAR PRADESH | 242301 | L2 | Rejected-AOC L2 | |
| 3 | L3₹26.3 L+₹2.2 L (9.13%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹27.1 L+₹3.0 L (12.5%)Rejected-AOC H NO 279 SHAHEED NAGAR AGRA | AGRA | L4 | Rejected-AOC L4 |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
14 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
GE Kanjoli line Bhararpur-321026
Comprehensive repair work to OTM Accn LAB ATA RA AND EA and other connected E/M items for Depot area under GE Bharatpur
2023_MES_606161_1
8301/E8
Open Tender
Civil Works
Item Rate
180 days
Bharatpur
As per NIT
6 documents required · 6 mandatory
₹500
GE Bharatpur
₹66,000
Yes
22 Sept 2023
27 Jun 2023
16 Aug 2023
27 Jun 2023
14 Aug 2023
1 Aug 2023
28 Jun 2023 - 18 Jul 2023
Amount
Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M & L of brick work with sub-class 'B' bricks, straight or curved on plan exc 6 metre mean radius as wall built in cement & sand mortar 1:6 complete all as specified and as directed.
M&L Demolition of of stone /boulder masonary , built in lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.
M&L Walling of random rubble, brought upto course well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.
Ditto all as item no 04 above but except stone complete all as specified and as directed. Note : Stone obtained from Srl item No. 3 shall be re-used.
M & L for Rendering 15 mm thick in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions, on fair faces of brick work or cement concrete surfaces including finishing the surface even and fair including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of this schedule.
M & L for Rendering 5 mm thick on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 finished even & smooth without using extra cement including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed.
M & L for Rendering 10 mm thick in cement and sand mortar 1:6, on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed.
Supply only liquid water proofing compound ISI Marked complete all as specified and as directed.
M & L for Rendering 10 mm thick in cement and sand mortar 1:6, on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M & L for preparation of newly plastered of walls and applying two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented alkali resistant priming paint conforming to IS:109-1968, over wall Surface including all necessary arrangement for execution of work.
M&L for preparation of newly plastered surfaces of walls and applying two coats of Exterior acrylic emulsion paint over one coat of water based white pigmented exterior acrylic priming paint for external wall Surface , complete all as specified and as directed.
Dismantling and S & F Rotational moulded polyethylene water storage tanks, triple layer, white or any colour as approved by GE with threaded type cover lid of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed. Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item. (iv) HDPE storage tanks shall be procured from the manufacturers as per List onf Make
All as per Seiral item No 14 here in before but capacity 1000 Litres complete all as specified and as directed.
S & F Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
M & L for disconnectiong existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 250 ltr but not exc 500 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed.
Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 250 lts but not exc 500 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed.
M & L for disconnectiong existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 500 ltr but not exc 1000 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed.
Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 500 lts but not exc 1000 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings, n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete as as specified and as directed.
M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and fair without using extra cement complete all as specified and as directed.
M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor, laid in panels including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed. NOTE: - GLASS DIVIDING STRIPS SHALL BE MEASURED AND PAID SEPARATELY.
Supply only 3 mm thick and 38 mm wide glass dividing strips complete all as specified and directed. NOTE: - FIXING CHARGES OF THIS ITEM SHALL DEEMED TO BE INCLUDED IN THE UNIT RATE OF FLOOR.
M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base, laid and finishing surface of concrete topping even and rough to receving of screed for tiling complete all as specified and as directed.
M&L for 18 - 20 mm thick black machine cut granite slab (of any type) (table rubbed and polished), as in steps, jambs, pillars, window- cills, cooking platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L for 18-20 mm thick 595 x 595 mm kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.
M & L for 15 mm thick machine cut kota stone slabas on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in colored cement to match the shade of marble over and including 10 mm thick rendering in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive wall, tiles complete all as specified and as directed.
M&L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished area of each tiles not exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified
M&L for non skid, ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exc 0.06 sq. m but n.exc 0.11 sq. m, in floors etc. laid over 15 mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for non skid, ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exc 0.11 sq. m but n.exc 0.18 sq. m, in floors etc. laid over 15 mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface of size 450x350x7mm/350x250x7mm thick, laid over 15 mm thick screed bed in cement mortar (1:6) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface of size 300x200x7mm thick, laid over 15 mm thick screed bed in cement mortar (1:6) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.
Dismantling of corrugated, or semi-corrugated sheets or plain steel sheets, in roof covering of any thickness and description complete all as specified and as directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Fixing only of pre - painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezodial profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note : Pre-painted galvalume aluminum sheets retrieved from ser item No 36 above shall be used.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M & L 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type of 'J' type or cranked hook bolts complete all as specified and as directed.
Fixing only of 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type of 'J' type or cranked hook bolts complete all as specified and as directed. Note : Asbestos cement corrugated sheets retrieved from ser item No 36 above shall be used.
M & L of 6 mm thick asbestos cement, serrated ridge for corrugated or semi corugated sheets in roofs fixed with 'L' type of 'J' type or cranked hook bolts complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E-250) quality A complete all as specified and as directed.
S & F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.
M & L 4 mm thick high pressure steam cured non asbestos fibre cement designer building boards fixed or laid/inserted to timber / GI / Aluminium frame work with screws in ceiling flat or sloping complete all as specified and as directed. (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.
S & F anodised aluminium snap grid frame work of size of grid 605x605mm for false ceiling suspended and fixed complete all as specified and as directed.
S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified and as per manufacturer's Instructions complete as as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.
Taking down shutters of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.
Taking down shutters of any description, area exceeding 2.00 sqm each complete all as specified and as directed.
Taking down shutters and refixing in the same opening after easing and adjusting, of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.
Taking down shutters and refixing in the same opening, after easing and adjusting of any description, area exceeding 2.00 sqm each complete all as specified and as directed.
Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description n exc 1 sqm each complete all as specified and as directed.
Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.
Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description area exceeding 2.00 sqm each complete all as specified and as directed.
M & L for powder coated anodised aluminium framed for doors, windows, ventilators with one or more rebates including aluminium channels for sliding shutters, jointing cleats for fixing etc complete all as specified and directed. (Thickness of powder coating not less than 50 micron).
S&F powder coated anodised Aluminium window/ ventilator shutters side hungs type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, rubber neoprene packing aluminium snap beading, screws anodized aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100mm long (2 No), handle 150 mm long (1 No) etc each leaf complete all as specified and directed. (Note : Thickness of powder coating not less than 50 micron).
S&F powder coated anodised Aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminium snap beading, screws anodized aluminium fittings such as 02 Nos 150 mm long aluminium handle each door, hinges100 mm long --3 Nos., beading clips etc complete all as specified and directed. (Note :- Thickness of powder coating not less than 50 micron).
S&F aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified and directed.
Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate complete as as specified and as directed
Repairing of existing aluminium door single leafexc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neoprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neoprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item
S&F for 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality and glazing with neoprene beading exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 410-W (Gde-E-250) quality -A) complete all as specified and as directed.
S & F of 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F of 35 mm thick, IInd class hard wood (Bonsum/Hollock), glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed.
S&F of 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required complete all as specified and as directed.
S&F for 0.56 mm thick aluminium alloy sheeting fixed with screw on door shutter complete all as specified and as directed.
S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with 2 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face in the frame at site, as per specifications and drawing complete all as specified and as directed.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick one side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube of size 19x19mm. The profile shall be cut and mitred at two corners and joinery by inserting two numbers of 150mm long brakets of 15x15mm MS tube inside the 19x19mm MS tube and suitable sorched complete all as specified and as directed.
S & F Butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and as directed.
S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200 mm long complete all as specified and as directed.
S&F MS sliding door bolt, plate type, stove enamelled, black with bright bolt not less than 12mm dia, length of bolt 300 mm, including a minimum of 6 bolts, nuts and washers, four on bolt plate and two on staple plate complete all as specified and as directed.
S&F Mild steel pressed handles, 150 mm long, oval type, stove enamelled, black, ISI marked complete all as specified and as directed.
S & F of Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.
S&F aluminium, anodised, 150mm long barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F aluminium, anodised handle 100mm size cast type anodised complete all as specified and directed.
Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
S&F Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body) suitable for door shutters of 851 to 1000 mm in width and of weght between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair Factory made steel windows with side hung shutters including box type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded complete all as specified and as directed.
All as per Srl Item No 84 here in before but Without Glazing bar, complete all as specified and as directed.
S & F Factory made Steel ventilator, ISI marked (confirming to IS-1038-1983 ), with top hung shutters including hinges and steel peg stay complete including making good disturbed surfaces of walls, complete all as specified. Note for srl item No 84 to 86 here-in-above :- (a) Steel windows/ventilator shall be of sizes to suit the size of opening at site and as ordered/directed by GE. (b) Steel windows /ventilator shall be factory made and shall be procured from one of the manufacturers as per Appendix ‘D’. (c) Steel windows/ventilator shall be conforming to IS-1038 and all as specified in these tender documents and MES Schedule Part-I. (d). The lugs of the steel windows/ventilator shall be fixed in P.C.C. blocks made of PCC 1:3:6 type C-1 (using 20mm graded stone aggregate). Size of PCC blocks shall be 23cm x 10 cm x 15 cm. (e) Cost of providing all the above aspects including the cost of lugs & P.C.C. blocks shall be deemed to be included in unit rate quoted for above item. Cost of making good the jambs to match with the adjoining surfaces shall be deemed to be included in the rates quoted for taking down items.
S & F window guard bars, plain and fixed independently in steel window frames, conforming to Fe 290 Gde E-165 complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame or stone or concrete or bricks surrounds glazesd with putty, taking out old pins punching or drilling out, complete all as specified and as directed.
S & F Sheet glass 4 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including provision of glazing pins/spring clips, complete all as specified and as directed.
M & L for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. Note: Cost of supplying wooden beads/ MS flat (as applicable) for fixing wire gauze in panels shall be deemed to be included in respective items of joinery /steel windows. However, fixing wire gauze with beads/ flat supplied with joinery/ steel window shall be deemed to be included in this item and nothing extra shall be admissible on this account.
Ditto all as per Srl Item No 90 here in before but fixed in repair complete all as specified and as directed.
S&F in repairs tower bolt Aluminum anodised of 200 mm long complete all as specified and as directed.
S&F in repair mild steel sliding bolt of any description and type of size 300mm long complete all as specified and as directed.
S&F in repair mild steel sliding bolt of any description and type of size 600mm long complete all as specified and as directed.
S&F in repair MS butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.
S&F in repair Aluminium anodised with galvanised mild steel hinge pin butt hinges of size 100mm complete all as specified and as directed.
S & F repair 150mm mild steel (Helical door spring) ordinary spring including with necessary welding work complete all as specified and as directed.
Repairing of existing aluminium door single leaf exc 1.00 Sqm but n exc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neoprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc n exc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified. Note :- Floor door springs, Neoprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item.
Ditto all as per Srl item No 98 above but door shutter n exc 1.00 sqm complete all as specified and as directed.
Supply Only neoprene rubber beading suitable for aluminium door / window panels complete all as specified and as directed.
Supply Only Aluminium alloy Hinges 100 mm complete all as specified and as directed.
Supply only 125 mm Aluminium alloy Handle complete all as specified and as directed.
S&F EPDM rubber strip of width 2 cm suitable for 1mm to 2 mm gap , fixed with adhesive like Fevicol pasting alongwith blue tag type nails complete all as specified and as directed .
S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed .
S&F for Rubber door seal of overall size 35 mm fixed screw on wooden or PVC Shutters complete all as specified and as directed .
S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed.
S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and as directed.
M&L for welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded n exc 6mm thick complete all as specified and as directed.
M&L for welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded exc 9mm but n exc 20 mm thick complete all as specified and directed.
M&L for Painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with pink primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed.
M&L for Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces,finishing with one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Painting to new steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed.
Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, finishing with one coat of synthetic enamel paint complete all as specified and as directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed. .
Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.
Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.
S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.
S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.
S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified and as directed.
S&F in repair Bib tap, cast copper alloy Chromium Plated fancy type/ long body with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.
S&F in repair pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15 mm bore stop angle valve, cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair 25 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed.
Cutting or uprooting grass incl removing old mud phuska/ roof treatment of any thickness and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified.
M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement all as directed.
M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be provided. after complete application full curing minimum 7 days . Above complete application will be done authorized apllicator from Manufacturer and manufacturer's specification. Make : IWL co/ STP/Piddilite .
M&L for 40mm thick PCC type B-0,( 1:2:4) using 12.5 mm graded stone aggregate with liquid water proofing compound as per manufacturers specification finished even and smooth without using extra cement complete all as specified and as directed.
S & F in repair Sheet glass clad polycarbonate 60.30 mm thick bullet/blast- resistant, manufacture's certified protection level UL 752 level 8(05 shot) and glazing with oil putty in squares not exceeding 0.5 sqm each all specified in particular specifications complete all as specified and as directed. Make : Thermosol Glass india (Pvt) Ltd, Natural Bullet proof Glass, SK TUFF Transparent Bullet Proof Glass or equivalent.
Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials and making good disturbed surfaces of wall, floor & ceiling etc. complete all as specified and directed.
Dismantling of old U/S sub main wiring and service wire of any size & make complete all as specified and directed.
Dismantling of old U/S rusted main switch/DB of any size capacity and make complete all as specified and directed.
M&L concealed point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe size not less than 20 mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface and making good the disturbed surfaces of wall/ceiling by means of Wall putty and matching colour of existing wall, PVCsleeve/dash fastners with cadmium plated screws including suitable size of PVC boards/ sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but FRLS unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for the following :-
One light point controlled by one way switch.
One fan point controlled by one way switch.
One 3 pin 6 Amp socket point outlet on the same board with other switches
One 3 pin 6 Amp socket point outlet on the independent board
One bell/buzzer point controlled by one push button.
All as per item No 136 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.
S&F ceiling rose surface bakelite three terminal ISI marked including suitable size of PVC board make : Anchor code No 3290 penta or equivelent make as specified in Appx 'B' complete all as specified and directed.
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt complete all as specified and directed.
S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and directed.
S&F switch piano flush button single pole one way 16 Amps 230 volt grade complete all as specified and directed.
S&F socket 3 pin 16A, flush type complete all as specified and directed.
S&F bell push flush type 5 Amps 230 volts grade complete all as specified and directed.
M&L bell multi musical type 230 volts grade complete all as specified and directed.
S&F in repair step type electronic fan regulator EME type 100 watt complete all as specified and directed.
M&L concealed submain wiring complete with 10 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 25 mm dia with all PVC accessories complete all as specified and directed. Note: Two runs of 10 sqmm and one run of 6sqmm earth conductor and PVC conduit pipe shall be measured as one length only.
M&L concealed submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified and directed. Note: Two runs of 6 sqmm and one run of 4 sqmm earth conductor and PVC conduit pipe shall be measured as one length only.
M&L concealed submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified and directed. Note: Three runs of 4 sqmm and PVC conduit pipe shall be measured as one length only.
Supply and fix in repair of distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt, 415V of the following DBs complete all as specified and directed. :-
4 way TPN with busbar 415 volts (double door)
8 way SPN with 200 amps rated busbar 240 volts (double door type).
4 Way SPN with 200Amp rated busbar 240V (Double door type)
S&F in repair MCCB's, MCB's of following capacity complete all as specified and directed. :-
MCB TPN 63 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
MCB TPN 32 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
MCB SPN 40-63 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
Supply and fixing in replacement of 20 watt LED tubelight fitting retro fit type 4Xfeet long with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.
Supply and fixing sensor based 20 watt LED tubelight fitting batten type 4 X feet long with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed. Make Havells of Model No: R20RBA or equivalent in crompton / Phillips
S&F in repair lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all incl 9watt LED lamp as directed by Engineer-in-charge.
S & F in repair street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed.
S&F in repair 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 2.5 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed.
S&F in repair LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders & Bulb with connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete alll as specified and directed.
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified and directed.
Supply & fix in repair 4 way VTPN Distribution Board (with provision for MCCB as incomer & MCB as outgoing) for suitable ofb MCCB with suitable bus bar & Prewired complete all as specified and directed.
S&F in repair on existing location including taking out of existing MCCBs of following capacity complete all as specified and directed:
MCCB 415 volts 100 Amps 04 pole 16 KA Thermal maganatic, breaking capacity not less than 16 KA,415 volts
S & F or laying galvanised steel tubing Medium grade (ISI marked) of size 40mm bore grounting in wall for hanging of ceiling fan with proper fixing of hanging clip & finishing of wall complete all as specified and directed.
S & F in replacement 4 sqmm solid conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular from over head ACSR conductor to fitting complete all as directed.
M & L in repair for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.50 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia GI watering pipe medium grade with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates with 8 mm reinforcement bors @ 15 cm c/c bothway complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in soft/loose soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge (Note:- Up to7.5Mtr length of pipe of 15 mm dia and GI wire shall be deemed tobe included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5M will be measured separately under respective item
M/s Gupta Traders
Tulsi Enterprises
abhinav and company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .