S/R to Bhawanipatna-Muniguda road such as construction of RCC drain from 43.380 to 43.580 Km from the year 2025-26

Earth work in excavation for road work in all kinds of soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and disposal of soil using tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with in all lifts and leads upto 1000m for reuse as per clause No.-301 of MoRT&H including cost, conveyance, of all materials with all labour and T&P,Cess required for the work etc. complete as per standard specification and direction of Engineer-in-charge.

Sand filling in road embankment, foundation or road trenches etc. quarrying, collecting, supplying good quality river sand as per clause No.401.4 and Section 2100 of MORT & H specification for road and bridge works (4th revision) laying in 15 cm (6'') thick layers watering to complete saturation & well rammed and dressed to proper grade and camber including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials, all labour and T&P required for the work etc. complete as per the direction of the Engineer-In-Charge

PCC M-15 work using 40 mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator and all leads and lifts as per approved Drawing and Techinical specifications and as per section 1700 & 2100 of MORATh specifications for road and Bridges works ( 5th Revision) including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge. 2(A)In Foundation bed as levelling cource

RCC M-25 grade in well curb for abutment and pier wells using 20mm to 10mm hard black granite Crusher broken agreegates as per relevant clauses of Section 1200 and 1700 of MoRTH Specifications for Road & Bridge works (4th Revision) including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement and Cement used in the work) A. In Foundation of retaining wall/ RCC drain

B. In Substructure of RCC drain

C. In Cover Slab of Drain

Steel reinforcement works in Structre & CD work using HYSD (FE-415) (SAIL Only) steel of approved manufacturer as per section 1600 &section 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and EMF,DMF and aditinal charges of all materials, binding wires 18 to 20 gauge and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)

Providing Weep Holes with 100mm diameter A.C/PVC Pipe in drain wall and other structures in plain/ reinforced cement concrete as per Section. 2200 & Clause No. 2706 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (4th Revision) & including cost EMF,DMF and aditinal charges royality of all materials, labour, T&P, Cess etc complete in all respect including cost of pipe and as per direction of the Engineer-in-charge.