Repair work of three Type-F houses located in DM Colony in District Bulandshahr

Dismantling C.C Floors including stacking of dismantled materials with in 60m distance as directed by the engineer-in-charge.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 15.23.1

Dismantling existing plaster including disposal of refuse with in distance of 60mincluding all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 15.56

M-150 Brick Work in 1:4 (1 cement : 4 corase sand) in superstructure including supply of all materials labour, T&P etc. required for proper completion of the work.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 6.4.2

12 mm. thick plaster with cement and Coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour, T&P etc. required for proper completion of the work.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST. As per DSR Item No. 14.1.2

Supply and fixing 30 mm thick flush Shutter commercial quility ISI marked plywood including fixing and adjustment of hinges, bolts,locks,handles spring and or other fittings but excluding their supply & including painting with two coats.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 9.21.2

Providind wall putty or old surface with approved quality material of berger/J.K./birla or similar make two coats.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 13.80

Finishing wall of with two coat of weather coat(asian/berger) of apporved quality on prepared surface with this paint to give on evan shade i/c supply of all material ,labour,T&P etc.required for proper complition of workincluding all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 13.111.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand & manufacturer including applying additional coats wherever required to achieve even shade & colour Old Surface.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As Per DSR 13.81

Paintig two coat on new painted work or iron work including its rubbing & cleaning ,including supply of approved all materials,labour,T&P etc.as required for proper completion of the workincluding all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 13.99.1

Providing & fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5mm & average width of aperture 1.4 mm in both directions for doors, windows & clerestory windows with necessary screwsincluding all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR Item No. 9.134.1.1.1

Providing & fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 of approved make.15 mm nominal bore..including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST. As per DSR18.53

Providing & fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 of approved make.15 mm nominal bore..including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST. As per DSR18.53

Providing & fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern, including flush pipe,with all fittings & fixtures complete, including cutting & making good the walls & floors wherever required..including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR17.1.1

6mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR 13.86

Providing & laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer,3 mm thick water proofing membrane,black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C,0.87-0.89 kg/litre & viscocity 70-160 cps.Over the primer coat the layer of membrane shall be laid using butane torch & sealing all joints etc.& preparing the surface complete.The vital physical & chemical 5 parameters of the membrane shall be as under: Joint strength in longitudinal & transverse direction at 23°C as 350/300 N/5 cm.Tear strength in longitudinal & transverse direction as 60/80N. Softening point of membrane not less than 150°C.Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D-5147.The laying of membrane shall be got done through the authorise dapplicator of the manufacturer of membrane.including all type of taxes,octroi,toll taxes,labour cess ,cost of all material,labour T&P etc required for proper completion of work as per Direction of E/I.But Excluding GST.As per DSR 14.90

Please Enable Macros to View BoQ information