Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAccepted-AOC AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹32.4 L+₹46,632.57 (1.46%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹33.1 L+₹1.2 L (3.84%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹36.5 L+₹4.6 L (14.3%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹37.0 L+₹5.1 L (16.0%)Rejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
3 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
ADDITION, ALTERATION TO BILLETS UNDER GE (AF) LOHEGAON AT AF STN PUNE
2023_MES_577336_2
8661/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF LOHEGAON
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹68,000
Yes
20 Apr 2023
14 Mar 2023
4 Apr 2023
14 Mar 2023
3 Apr 2023
21 Mar 2023
Amount
Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed.
S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of structural steel work complete all as specified and directed.
S & F Rolled Mild Steel roof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc., complete all as specified and directed.
S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as specified and directed.
Dismantling wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/ blankets, and shifting of electrical wiring and same is refixing as directed complete all as specified and directed. any thickness, including cover fillets complete all as specified and directed.
S & F in repair aluminum snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed.
M & L in repair in ceiling flat or sloping for 4mm thick non-asbestos cement plain building board fixed to timber frame work with screws all as specified and directed
S & F in repairs 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminum complete all as specified and directed.
M/L for PCC precast solid block masonry walling (1:3:6) Grade C1 exc 10cm width /girth in CM (1:6) complete all as specified and directed.
Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L 10 mm thick plastering in cement mortar 1:6 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work finished even and smooth without using extra cement, complete all as specified and directed.
M & L for 5mm thick cement plaster in CM 1:3 on ceiling surface fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.
M & L for Preparation of new surfaces of ceiling as taken in item no 9 above and applying three coats of white wash complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
Ditto all as per Ser Item No. 17.00 above but on walls complete all as specified and directed.
M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a one coat of chalk whiting complete all as specified and directed.
M&L for preparation of new treated plastered / unplastered surfaces by brooming down with steel brush and applying two coat of cement base paint on existing tint complete all as specified and directed.
M & L for Preparation of old surfaces of ceiling including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing all as specified.
M&L for complete removal of existing treatment plastered or unplaspered old decorated surfaces of walls including brooming down or steel wire brushing, rubbing using Emery paper etc, and applying two coats of Oil Bound Distemper on walls including preparatory to distempering all as specified.
M&L for complete removal of existing treatment plastered or unplaspered old decorated surfaces of walls including brooming down or steel wire brushing, rubbing using Emery paper etc, and applying two coats of cement base paint on walls all as specified complete all as specified and directed.
M & L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying one coat of white washing on old plastered surfaces of walls all as specified.
Ditto all as per Ser Item No 24.00 above but on surface of on ceiling /soffits of slabs, chajjas complete all as specified and directed.
Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.
Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and directed.
Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.
M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.
M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class soft wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed complete all as specified and directed.
M & L for Factory made of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed
S & F 100 mm size butt hinges, medium weight, cold rolled M complete all as specified and as directed.
S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S & F 150 mm size Aluminium handles, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S & F 250 mm long Aluminium sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .
S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.
S & F Steel windows or ventilators, fixed type, with glazing bars all as specified and directed.
Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beads.
S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.
S & F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S & F in repairs Galvanised steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M & L for Powder coated Anodised aluminium frame of standard section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified
M& L for 8/9mm thick prelaminated particle board, interior grade, prelaminated on side with decorative choice laminationa and other side balancing white lamination fixed with screws to timber/aluminium frame all as specifed and directed.
M&L for Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.
M&Lfor Powder coated aluminium window and ventilator(lovered) shutters, side hung type without sash bars/Sliding track type with locking device aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.
M&L sheet glass 5.0 mm thick ordinary quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed
S & F Door closer hydralically regulated( aluminium extuded body), designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg.
M&L for preparation of old painted steel surfaces like frame work or any description over 10cm in width or girth and applying one coat of synthetic enamel paint white or any different tint ,complete all as specified and directed by the Engr-in-Charge.
M&L for Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girth complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint white or any different tint complete all as specified and directed.
M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete.
Demolition of cement concrete in ground floors and pavings n exc 15cm thickness below or above ground level.
Demolition of cement concrete(unreinforced) of any description and in any position not otherwise spcifically provided for all as per specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified and directed.
Dismantling floor hearth and wall tile incl cement mortar bedding, remove serviceable tiles to store and rubbish off the premises
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Screed Bed 20 mm thick in Cement Mortar (1:6) including rubbing and polishing complete all as specified and directed.
M&L kota stone slab 20-25mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM (1:3) complete all as specified and directed.
M&L granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over 15 mm thick screed bed in CM(1:6) complete all as specified and as directed.
M& L for rubbing and mirror polishing existing kota stone flooring etc complete all as specified and directed.
M & L for PCC 1:2:4 B0 (12.5mm graded aggregate) 25mm thick as in flooring complete all as specified and as directed by Engr-in-charge.
M&L for non skid ceramic coloured tiles 7to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 mm thick screed bed in cm 1:6 for complete all as specified.
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.
M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in net cement slurry and pointed with white or colour cement to match and over and including 10mm thick rendering in CM (1:4) for complete all as specified.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.
M & L for type D2 1:4:8 (40mm graded in aggregate) in foundations filling and mass concrete all as specified and directed.
M & L for type D2 1:5:10 type E 2 using 40mm graded aggregate in foundations filling and mass concrete all as specified and directed.
M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection complete all as specified and directed.
Raking out joints/pointing cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed.
M & L for Keyed pointing to random or polygonal rubble, uncoursedor brought upto course CM 1:4 complete all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation and and getting out in Hard/dense soil complete all as specified and directed.
Demolition and breaking up drain pipes SGSW pipe including fittings and packing ,hunching and bed concrete complete of the size 100mm internal dia of SGSW pipe complete all as specified and directed.
Demolition and breaking up drain pipes 150mm internal dia of RCC pipe including fittings and packing, hunching and bed concrete complete all as specified and directed.
Demolition of brick work or PCC blocks/stone masonary built in cement mortar including coping of manholes/drain complete all as specified and directed.
M & L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 100mm dia including packing under and haunching against the sides of pipes after they laid and tested as reqd on ground condition.
M/L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 150mm dia including packing under and haunching against the sides of pipes after they laid and tested as reqd on ground condition.
S&F 100mm bore salt glazed stone ware drain pipes Grade A laid in trenches and joined complete all as specified and directed.
S&F for Reinforced concrete pipes class NP-2, laid and jointed complete with collars if required for 150mm dia pipes complete all as specified and directed.
Returning, filling in including spreading, leveling , watering and well ramming in layers not exc 25 cm in any statra complete all as specified and directed.
Removing excavated in any statra to distance not exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.
M&L for 100 mm thick cement concrete Type B-2, 1:2:4 (using 40mm graded stone aggregate), as in mass concreting,footing , etc, and finished the cement concrete surfaces even and smooth with out using extra cement, complete all as specified and as directed.
M & L for RCC 1:2:4 type B1 as in band and lintel and as staging ,slab using 20mm graded stone aggregate, complete all as specified and as directed
M & L for mild steel TMT bars 10mm dia and over, cut to lenth , bent to shape required , including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and as directed
M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165
M&L for flat formwork to soffits of suspended slabs of rough finished of concrete such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed
Taking down steel tubing 15mm and connection including cleaning for refixing or removal to store.
S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore
Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore
Taking down steel tubing 20mm and connection including cleaning for refixing or removal to store.
S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore
Fixing only tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore
M&L for GI tubing 25mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs
Cutting of existing steel tubing for alternation or addition of 15mm dia pipes all as specified and directed.
Cutting of existing steel tubing for alternation or addition of 20mm dia pipes all as specified and directed.
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not Exc 10 cm girth in stone/concrete walls complete all as specified and directed by Engr-in-Charge.
S&F in repair for PVC (SWR) floor trap 100mm dia including jointing with solvent cement in to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed.
Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM (1:4), complete all as specified and directed.
S&F in repair vitreous china under counter wash basin ovel type, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling 32 mm dia and 750mm long PVC connection all as specified and as directed.
S&F Tubular towel rail 20mm dia 600mm long CP including brackets complete all as directed
S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.
S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed
S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat white closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.
Supply and fixing in Health faucet including 1.00m flexible pipe with brass nuts for EWC, as approved complete all as specified and directed by Engineer-in-Charge.
S &F toilet paper holder with flat recessed type stainless stell complete all as specified and directed.
S&F in repair vitreous china squatting pan ORISSA pattern water closet size 580x440mm white with integral foot rest ,p or s trap and including lime concrete bedding etc (excluding flushing cistern and flush pipe)
S&F in repair Vitreous China urinals bowel type (flat back or corner wall type) of size 465*355*265mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe
S&F in repairs Urinal waste pipe white size of 50X800 mm white complete complete all as specified and directed
S& F Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-but suitable for urinals, (Minimum weight 32mm-45gms).
S&F Rotational moulded water storage tank (cylindrical/vertical/or flat type) with closed top pf capacity 1000 ltrs hoisted and fixed in position on the platform with all connection such as inlet, outlet, airvent, overflow etc complete all as specified and directed.
S&F Gun metal globe or globe valve 15mm dia bore with iron wheel head screwed both ends for complete pipe and fixed complete all as specified and directed by Engineer-in-charge
S&F Ball brass valve , high pressure , with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 25mm complete all as specified and directed by Engineer-in-charge
M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed
S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union of 15mm dia size complete all as specified and directed by Engineer-in-Charge
S & F in repair angle valves 15mm dia size fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.
S&F in repair concealed type stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union of 15mm dia size complete all as specified and directed by Engineer-in-Charge
S &F Brass chromium plated 4'' shower rose with 225mm S.S. Arm & Flange size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.
S&F CP soap case all as specified and directed
S & F Grating doom 100mm dia of CP with holes for waste pipes all as specified and directed.
S & F Grating doom 100mm dia of CP without holes all as specified and directed.
S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed
Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.
Ditto all as per Ser Item No 127.00 above but 110mm dia complete all as specified and directed.
M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.
Ditto all as per Ser Item No 129.00 above but 110mm dia complete all as specified and directed.
S &F 110mm dia of PVC (SWR) branch piece, single (Double Y) equal or unequal all as specified and directed.
M&Lfor PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.
Dismantling stone slabs or roof treatment (tarfelt treatment/stone slab)of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc,including cement mortar, bedding (But not backing ) and rubbish of premises ,sweeping clean and washing down with water to remove dust complete all as specified and directed.
Demolition of cement concrete unreinforced (other than ground floor) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of liquid WPC by wt of cement (as per manufacturer instruction).
M&L for brushing neat cement slurry with 3.0 Kg of cement per Sq.meter.
M&L PCC (1:2:4) type B0, (12.5mm graded aggregate) padding/ coping /coving/chamfering and including chowkhat filling in averaging on RCC roof slab or terrace including finishing even & smooth with using extra cement, include for use of formwork.
M&L rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC with cement (as per manufacturer instruction) including finishing even and smooth without using cement.
Supply only Integral water proofing compound complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application including preperation and applaying two coats of Heat resisting Aluminium paint over APP Membrane complete all as specified and directed.
M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed
M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed
M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed
M&L for polythene flim black 150 micron laid in sunken floor complete all as directed
M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed
M&L for 25mm thick PCC 1:1.5:3 type A0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)
M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry over a 15mm thick screed bed in CM (1:6) in floors all as specified and directed.
M&L machine cut cudappah stone slab 20-25 mm thick complete all as specified and directed .
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .