CERTAIN REPAIR TO PLASTER FLOORING TILING JOINERY ETC AND PERIODICAL SERVICES AT HQ PUPSA OFFICERS MESS AND STATIONERY DEPOT DSOI COMPLEX 2 UB SIGNAL COY MES OFFICES AND INSTALLATIONS IN AOR OF AGE B/R-I AND VETERAN NODE UNDER AGE B/R-I OF GE (NORTH

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed

M&L for brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for rendering 10 mm thick in CM 1:4 for fixing of wall tiles/marble dados finishes complete all as specified and directed

M&L for ultra charged vitrified tiles 15mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.2 Sqm (as approved by GE) in flooring set and jointed in premium epoxy grout to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive laying of tiles on brick/concrete surface complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).

All as described Ser item No. 9 here-in-before but as in skirting complete all as specified and directed.

S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (square/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tile over and including over 15mm screed bed in CM 1:6 complete all as specified and directed.

All as described Ser item No. 11 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match the colour of tile over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm/350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed

M&L for Ceramic glazed wall tiles including designer/digital/ HD/Polished tiles (thickness as specified by the manufacturer), area of each tiles exceeding 0.18 Sqm but not exceeding 0.72 Sqm in flooring set and jointed in premium epoxy grout to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).

M&L for anodised aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed.

M&L for treatment of soil under existing floors/walls using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors/wall complete all as specified.

S&F premium range anti skid matt finish premium range vitrified tiles (as approved by GE) area of each tiles exceeding 0.16 Sqm but not exceeding 0.36 Sqm (thickness not lessthan 8mm) in flooring set and jointed in premium epoxy grout to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).

M&L for marble stone slab work (as approved by GE) 18 to 20mm thick (table rubbed and polished) in floors, dados, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified and directed.

M&L for marble work Green Marble 18 to 20mm thick (table rubbed and polished) in floor, steps, jambs, dados, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified and directed.

M&L for Mirror polishing on existing marble work/Granite work/stone work as in floors where ever required to give high gloss finish complete all as specified and directed

M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jambs, pillars, windows cills, making border/design for floors etc and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing and including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc. complete all as specified & directed.

S & F bold metallic stainless steel letters or alphabetes made out of 22 Guage thick Stainless steel plain sheet of grade 304 plain sheet of suitable with not less than 50mm and depth/thick not less than 20mm based on height of letter (hollow section made to shape by using computerised cutting), height of letter not less than 15 inch in Hindi and English languages and fixed on granite/tiled/stone wall cladding finished wall elevated from surface complete all as specified and as directed.

S&F wall to wall mirror of 5.5mm - 6.0mm thick fixed over plywood of required thickness complete with hard board ground fixing with rawl plug and fasteners of approved design with CP brass screw and washers i/c rubber wood moulded beading all round mirror etc. complete all as specified and directed

S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional complete all as specified and directed

S & F 8-10mm thick (Clear/ Frosted Acid wash) toughened Polish glass (meeting IS 2553 part 1 and EN-12150-1:2015) as in Frameless glass shower cubicles/partitions with Wall to wall enclosure with one end fixed glass and openable hinged/sliding door fixed with wall Coloured/transparent finished Edges (As approved by GE) including Brass hardware, door stoppers, wall to glass hinge, glass to glass hinge, wall to glass connector, floor clamp, stabilizer rod, knob, plastic parts, roller, floor guide, handles, wall brackets, floor bracket, top/bottom sliding track, L-clamps, profile strips with chrome finish and mirror finish stabilizer bar & rust Free Screws to make functional complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed Note: stainless steel butt hinges shall be paid separately

M&L for gauged shutter shall be made out of U frame 35x35x5mm, 25x25x5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide and including taking down old doors any type with iron items complete all as specified and directed

M&L for 1st class teak hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed including holdfast complete all as specified and directed.

M&L for 30 mm thick 1st class teak hard wood heritage wood work shutter designer pattern (panelled/ plain) design pattern as approved by GE) including fixing to frame complete all as specified and directed.

S & F 30mm thick 1st class teak hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

S & F 30mm thick 1st class teak hard wood windows, ventilators, etc. to be provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed

M&L for 2nd class hardwood designer fillets, square, rectangular or triangular in section, sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm clean sawn, secured with screw complete all as specified and directed

M&L for 2nd class hardwood designer fillets, square, rectangular or triangular in section, sectional area exceeding 6 and not exceeding 13 Sq.cm clean sawn, secured with screw complete all as specified and directed

M&L for High gloss melamine polishing on wood work (One or more Coat) over a under Coat of French Spirit polishing (two or more coat) new work including a coat of wood filler complete all as specified and directed.

S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed.

S&F stainless steel sliding bolt 300mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified and directed

S&F aluminium anodised handles cast type anodized complete all as specified and directed

S & F 125mm Extruded brass handles,fabricated type polished complete all as specified and directed.

S&F 150mm size Extruded brass handles, fabricated type polished complete all as specified & directed.

S&F Brass barrel tower bolt 200 mm, extruded section complete all as specified and directed

S&F Brass sliding bolt 300 mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

S&F 100 mm butt hinges, medium weight Brass complete all as specified and directed

S&F Brass barrel tower bolt 150 mm, extruded section complete all as specified and directed

M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 600- 750 mm. (Note: Note: (i).Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. (ii).Front facing area shall only be considered for payment ) including taking down old boarding any type complete all as specified and directed.

M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O complete all as specified and directed

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over one coat of red oxide zinc chrome primer complete all as specified and directed

S&F Mortise lock with set with Pair of 8100 Mortise Lever Handles, 271a lock with 55mm backset and 60mm EPC with one side thumb turn and one side key, Fire resistance BSEN 1634:1:2000 Certified Satin Finish Mortise Lock body approximate size of back set 45 mm X 85 mm, with 52 mm Lock and 26 mm brass latch , Stainless steel main & Strike plate & including back to back fixing feature suitable for minimum door thickness 30 mm Single door shutter with necessary fixings, screw as required to complete the work complete all as specified and directed

S&F in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed

S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all as specified and directed

S&F powder coated approved colour anodised aluminium windows side hung type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick plain glass complete all as specified and directed.

S&F powder coated approved colour anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick plain glass complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

S&F 5mm thick hollow PVC Sheet wall Panelling (sand wiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified and directed

M&L for stone slab 30mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

M&L for provision of GI framed work (snap grid) suitable for size as in false ceiling of size 605mmx605mm consisiting of following :- i) GI sections incorporated in frame work shall conform to designation 63400 given in IS:737-1986. ii) The snap grid consist of aGI main/cross tee of size 36.5mmx25mmx1.40mm thick and 25mmx25mmx1.40mm thick respectively,iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 4mm dia mild steel GI wire iv)The main and cross tees shall be jointed at junction/crossings with GI angle bracket,of size 15mmx15mmx1.40mm thick fixed with suitable mild steel, bolts,nuts and washers all as manufacturer's instructions v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with GI angle of size 25mm x 25mm x 1.4mm thick vi) Size of the snap grid shall be 605mm x 605mm including taking down existing ceiling with cover fillets etc complete all as specified & directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3) complete all as specified and directed

M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seprately. (upto a height of 15.0m)

M & L for preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed

M&L for preparation of old/new surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty complete all as specified and directed

M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic plastic emulsion paint (royal shine) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of interior grade primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means/ or preparation on new surfaces of walls, including filling depressions of scrapped surfaces and minor crackes with wall putty and applying two coats of JK/ Birla wall putty & making the surfaces abosolutely smooth of uniform thickness and after prepration of surfaces, again applying a coat of JK/ Birla wall putty over & including a coat of cement primer and again smoothing the same with sand paper and after prepared smooth surfaces, finally treating the surfaces with three coats of Asian Royal play metallic texture paint (first two coat as base coat & third coat as spray coat of approved colours) for texture finish surfaces complete all as specified and directed

M&L for preparation of old/new plastered surfaces of walls with putty and applying two coats of Oil bound distemper to match the existing surfaces as required, complete all as specified & directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint on new/old surfaces of wall having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces using roller for painting complete all as specified and directed

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed

All as described Ser item No. 77 here-in-before but 25 mm bore pipe complete all as specified and directed

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed

S&F triple layer white color 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including Dismantling OH water tank of capacity exc 500 ltr but not exceeding 1000 ltr and removing from site complete all as specified and directed

S&F 20 mm dia PTMT ball valves with brass rod, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms) complete all as specified and directed

S&F in repairs bib taps brass chromium plated 15 mm bore size with flange screwed down screwed for 20 mm dia pipe or for brass ferrule. Make: Jaquar OPP-CHR-15037PM or equivalent as approved complete all as specified and directed

S&F in repairs 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F brass floor door stopper body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repairs 15 mm dia angle cock cast copper alloy chromium plated with flange screwed down high pressure with crutch or butterfly handle, flench screwed both ends for 20mm dia pipe or for union complete all as specified and directed

S&F in repairs chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified and directed.

S&F in repairs rimless blind installation wall hung WC with including UF soft close slim seat cover, hinges, accessories set (size 380x520x365mm) including replacement of trap as per manufacturer instuctions complete all as specified and directed

S&F in repairs PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and directed

S&F in repairs Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC with Flush Control Plate Exposed Part Kit of i Flush 32mm with Dual Flush Push Button Actuation & control stop cock (Suitable for Item concealed cistern body) as per manufacturer instuctions complete all as specified and directed

S&F in repairs vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F in repairs white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F in repairs Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mm complete all as specified and directed

S&F in repairs vitreous china thin Rim Table Top Basin (colour as approved by GE), Size: 530x420x140 mm, Shape - Rectangular including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified and directed

S&F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed

S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770x451x680mm/ 800x470x680 mm having vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design with necessary fixing arrangment complete all as specified and directed (Note: wash basin to be paid separately)

S & F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Round, Size - 360 x 360 x 120mm including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified and directed.

S & F in repairs Vitreous China Wall Hung Basin With Fixing Accessories, Size: 610x465x275 mm including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified and directed

S&F in repairs ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F 600mm Long Braided Hose with M10 x 1 Nipple, 15mm Nuts, O-Ring & Rubber Washers complete all as specified and directed

S&F Maze Overhead Shower 300 x 300mm Square Shape Single Flow Body & Face plate Stainless Steel with Chrome Finish with Rubit Cleaning System with CP shower arm 24inches. Make : Jaquar Cat Part No OHS-CHR-1639 complete all as specified and directed

S&F in repairs CP Soap Dish Holder complete all as specified and directed

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified and directed.

S&F in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

S&F in repairs PVC bends 75mm bore, any radius complete all as specified & directed.

S&F in repairs PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F in repairs 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F in repairs 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F in repairs 110mm PVC (SWR) 'S' trap complete all as specified and directed

S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia. fixed in repair complete all as specified and directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia. fixed in repair complete all as specified and directed

S&F 550mm X 750mm LED Lighting frameless, round/rectangle of required size, Anti-Fog, wall mounted backlit mirror. Thickness 5mm, round Dimmable Touch button 6000k (Cold White) SGS approved environmental protection coper free mirror complete all as specified and directed

S&F in repairs 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type Bath & Shower Mixer including Telephone Shower Crutch & Shower Kit (9537N & 571), Wall Mounted for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed.

S&F in repairs hand Shower (Health Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and directed

S&F in repair 15 mm dia Concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union fixed in repair complete all as specified and directed

S&F in repairs PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Corner Glass Shelf (with Bracket) complete all as specified and directed

S&F in repairs chromium plated towel rail 450 mm long as approved quality complete all as specified and directed.

S&F in repairs SS fancy type Brackets of suitable size to fix 25mm dia SS decorated curtian rod with end knobs complete all as specified and directed.(Note: 02No Bracket and 02 No End knobs to be considered as one set for measurement purpose complete all as specified and directed

S & F 25mm dia Stainless steel decorated curtain rod with ring complete all as specified and directed.

M & L for repairs to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM (1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor. complete all as specified and directed Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes including hacking out old glass complete all as specified and directed

S&F in repairs galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stapplercomplete all as specified and directed

M&L for repairs to anodised aluminium door shutters and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as specified and directed

M &L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings over 15mm thick rendering CM 1:4 complete all as specified and directed

S&F in repairs 12.5 mm thick tapered edge gypsum moisture resistant board (seamless type) conforming to IS: 2095- Part I. false ceiling at all heights including providing and fixing of framework made of special sections power pressed from MS sheets and galvanized with zinc coating of 120g per sqm ( both sides inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts and bolt of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230 mm long GI wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with help of rawl plugs at 450 mm centre with 25 mm long dry wall screws at the rate of 230 mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5x25 mm at 230 c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and including two course of primer & Acryllic Emulsion paint suitable for board all as per manufacturer's specification and also including the cost of making opening for light fitting, grills, diffusers cutout made with frame of perimeter channels suitably fixed,complete all as specified and directed

S & F in repairs 15mm CP Two Way Angular Stop Cock with Wall Flange complete all as specified and directed

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan, Stop cock/ angle cock complete all as specified and directed

S&F Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror complete all as specified and directed.

S&F in repairs SS Toilet Roll Holder complete all as specified and directed

S&F in repairs SS Towel Ring complete all as specified and directed

S&F in repairs Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed

Sanjay Associates (BID ID -3350639)

Deepak Kumar Gupta (BID ID -3341860)