SPECIAL REPAIR TO BLOCK NO 18 AND 19 ALBERT EKKA ENCLAVE,4 TTR, 1STC UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster / terrazzo of any description and thickness including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:6) on brick work or concrete internal surfaces, finished even and smooth without using extra cement complete all specified and directed.

M&L 15mm thick rendering on concrete/brick external surfaces in CM (1:4) using liquid water proofing compound as per Manufacturer's instruction, finished even and smooth without using extra cement complete all as specified and directed. ( Note:- Liquid WPC shall be measured and paid for separately)

Supply only liquid water proofing compound(ISI marked) complete all as specified and directed.

M&L for preparing newly plastered surfaces of internal wall and applying two Coats of oil emulsion distemper over 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of appropriate primer complete all as as specified and as directed.

M&L for complete removal of existing treatment & washing, rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and priming plastered and other surfaces with alkali resistant priming paint and then applying two coats of cement base paint on external wall complete all as specified and directed. (Note:- Curing shall be done before and after applying of paint.)

M&L for complete removal of existing treatment & washing, rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of oil bound distemper over and including 2mm thick wall care putty on wall including applying primer over wall care putty complete all as specified and directed

M&L for prepration of old painted surfaces of steel, of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

S&F expanded metal, nexc 4 Kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire, not less than 0.9 mm dia or fixing with galvanised steel staples, supplied and fixed complete to wood or steel members complete all as specified & directed.

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets in roof coverings complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick(AZ-150) of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick(AZ-150) of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified & directed.

Dismantling of wall and ceiling boards( fibre pulp, insulation etc) any thickness including cover fillets complete all as specified & directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed suspended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. (Make :- ARMSTRONG / EVEREST or other equivalent Make as approved by GE.)

Dismantling timber fillets,posts rafter purlin under 40 sqcm in sectional area,complete all as specified and as directed.

Dismantling timber in scantling 40Sqcm and over in section, framed work, in any position complete all as specified and directed.

S&F mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410W (Gde-E-250 quality 'A') complete all as specified and directed.

S & F mild steel plate (plain or chequered) channels,square cut or notched (ordinary and counter sunk ) forming holes, with riveted,bolted or welded attachement conforming to Fe- 290 (Gde E-165) complete all as specified and directed.

S&Fmild steel screw bolts (machine made)with hexagonal or square heads at one end and screw the other ,or screwed both ends each screw fitted with washers and one hexagonal or square n exc 5 cm long the dia of neck 5 to 10 mm complete all as specified and directed.

S&Fmild steel screw bolts (machine made)with hexagonal or square heads at one end and screw the other ,or screwed both ends each screw fitted with washers and one hexagonal or square exc 5 cm and n exc 10 cm long the dia of neck 11 to 15 mm complete all as specified and directed.

S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe - 290 (Gde E-165) complete all as specified and directed.

M&L for preparation of newly steel surfacces of any description not otherwise desribed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide zinc chrome primer surfaces complete all as specified and as directed.

M&L for preparation of steel based surfacces of any description, n exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer surfaces complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials,old surfaces of any descriptionand girth,not otherwise described and treated with one coat of creosote oil complete all as specified and directed.

Demolition of brick work as in walls/parapet wall, removing grass, fungus, weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and directed.

M&L for Brick work with sub class ‘B’ fly ash brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ fly ash brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Dismantaling floor hearth or wall tiling/china mosaic including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 , finished rough to fix tiles complete all as specified and directed.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pillars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut Cudappah stone slab on cooking platform/shelf, 20-25mm thick, over and including 15mm thick in CM (1:6) cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edges of granite stone slabs, one edge, such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, finished even & fair without using extra cement, laid in bays with construction joint , 6mm thick , filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed..

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement wherever provided shall be measured and paid for separately)

Taking down chowkhats or frame (with shutter without taking off shutter from the frame) area not exc 1.5 Sqm each all as specified and directed..

Taking down chowkhats or frame (with shutter without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4 sqm each complete all as specified and directed.

Supplying and fixing pre painted steel sliding window 3- track,2 glass panel and 1 mesh panel sliding window fabricated from roll formed sections made of galvanised steel clolour powder coated ( Base steel as per IS 513 'D' quality,galvanised as per IS 277 with zinc of 20 GM/Sqm) with total coated thickness of 0.58mm. primer coated with epoxy coated of 5-7 micron thick, finish painted with a polyster paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyster powder up to 50-60 microns thick.Section of mesh should be of size 35x49mm.The window should be paneled with 5mm thick plain float glass.Corner bracked for internal and external frame made of glass filled nylon.Gasket are to be made of Ethyl Propylene Diamine Monomer (EPDM). THe sections are to be cut to length,joined and assembled by means of corner bracket.The above frames should be fixed to concrete/masonry wall by means of self expanding screw complete all as specified and directed.

S&F 18 mm thick Factory Made Solid PVC Moulded for cupboard shutters, shelves ,kitchen cabinet complete all as specified and directed.

S&F continuous (piano) hinges,mild steel, bright finish or electrogalvanised,width of flaps 30 mm complete all as specified and directed.

S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified and directed.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete. (Note : Glazing and wire clothing shall be measured and paid for separately)

S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet, reinforced with MS square tube, supplying & fixing in opening as per specificationn complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M.S frame shall be covered with heat moulded plain colour PVC , 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F framed work conforming to Fe-290 ( Gde E-165), as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed.

S&F MS Peg set of six, powder coated, as approved by GE, complete all as specified and directed.

M&L for mild steel pipe 25 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE, complete all as specified and directed.

M&L for Cutting holes in brick walls, exc half brick but nexc one brick, in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20mm graded crushed stone aggregate complete all as specified and directed.

M&L for treating small article such as stops, covers, gully, gratings and holdfast ends & post backs of chowkat etc with creosote oil, tarred area n exc 0.10 Sqm each complete all as specified and directed..

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm bore pipe complete all as specified and directed.

S & F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall (Concealed)and ceiling or laid in floors Complete all as specified and directed.

S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

S&F Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan head, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and directed.

S&F, in repairs, fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and directed.

S&F in repair C P glass corner shelf set of three single including Screws and CP bracket complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 600 mm long complete all as specified.Make- Jaquar Cat Part No- AKP 35715PS or equivalent as approved by GE.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union, overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F , in repairs, kitchen plate rack, made of stainless steel 1mm thick complete (size 1200 x 900mm x 200mm width) of trade pattern complete all as specified and directed.

Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed.

M&L for 32 mm bore Low Density Polyethylene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm, fixed to walls or in floors etc complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 gm) complete all as specified and directed.

S& F in repairs chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. Complete all as specified and directed. (Make- Prayag Cat Part No 554 or equivalent as approved by GE.)

S & F in repairs Towel rail 600 mm long and 20 mm dia, brass chromium plated, D-type, fixed with screws and wooden or plastic cleats complete all as specified and directed.

S & F in repairs Towel ring, brass chromium plated, round type, fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattern (excluding flushing cistern and flush pipe) complete including provn of lime concrete or PCC bedding, connection to flush pipe , trap etc & making good the disturbed surface complete all as specified and directed.

S&F in repairs 10 ltr PVC valve less syphonic action type, flushing cistern, low level white with inlet ball valve, float and handle with flush pipe complete all as specified and directed.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed.

S&F CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F CP waste fittings brass chromium plated for sink, 40mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M&L for 75mm dia PTMT multi-floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ), including all fittings,heads,shoes,bends,swan necks etc. including cleaning or refixing or removal to store all as directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints, laid in floors, trenches complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access door rubber rings joints, fixed to walls complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M&L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed

M&L PVC(SWR) Tee of 75mm dia with access door etc complete all as specified and directed

S&F PVC (SWR) gully trap 125 x 110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F stack clamps out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc all as specified and directed.

Dismantling water tanks exc250 but n exc 500 ltr capacity complete all as specified and directed.

S& F 500 litre double layered rotational moulded polyethylene water storage tanks (cylinder vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified and directed.

S&F 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as directed.

S&F 25mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and directed.

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed.

M & L for Sub Main Wiring two single core PVC insulated FRLSH cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed. (Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length and PVC conduit measured as one unit length.)

M&L for Sub Main Wiring with two single core PVC insulated FRLSH cable of size 4.0 Sqmm multistranded coper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed. (Note :- Two Nos of 4 Sqmm Wire and One No of 4 Sqmm Earth wire in One RM length and PVC conduit Measured as one unit length.)

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded coper conductor FRLSH cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed for the following : -

One light point/Bell point controlled by one switch.

One fan point/Exhaust Fan point controlled by one switch.

One socket point controlled by one switch on same board.

One socket point controlled by one switch on Independent board.

Description all as per item No 118 above but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed.

S & F, in repair , bell ding dong AC 230 volts single pole one way complete all as specified and directed.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole, one way, complete all as specified and directed.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed.

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed.

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed.

S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed.

S & F in repair lamp holder PVC Polycarbonate type body, with back plate for batten fitting including 9 watt LED lamp complete all as specified and as directed.

Supply and fixing, in replacement, decorative wall light fitting WITH and including LAMPS 9 WATT, made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. (Make:City 1 of havells or equivalent in Luker/ Philips as approved by GE)

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed. ( Make : Philips Cat part BN 021 LED 22S 6500/4000 PSU GR SI or equivalent in Havells/ Luker as approved by GE).

S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor cable of suitable size & length complete all as specified & directed. (Make :- Havells Cat Part No. HFXAFT10WED 857SSYMBOPC or equivalent in PHILIPS / Luker as approved by GE)

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed . (Make: Havells VLUMINASL30WLED757PSY30PC or equivalent in PHILIPS /Luker as approved by GE)

S & F Exhaust fan steel body, heavy duty, 300 mm sweep, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed.

S & F Exhaust fan made of sturdy engineering plastic, heavy duty, sweep 250 mm, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed.

S&F in replacement of sheet steel enclosure distribution board, double door, factory made, Vertical TPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits, one incoming MCCB 100 amps and MCB SP 40 Amps -12 Nos, circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed.

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral, 8 way with 200 Amps rated bus bar, 240 volts, single pole and neutral, double door, complete all as specified and directed.

Supply and fixing, in replacement, MCB single pole and neutral 240 volts 40 Amps, 'B' Series complete all as specified and directed. Make: Legrand/Seimens/GE

Supply and fixing, in replacement, MCB single pole 240 volts upto 40 Amps, 'B' Series complete all as specified and directed. Make: Legrand/Seimens/GE

Supply & Fixing , in repair, single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F ,in repair, bell push piano, flush type, AC 230 volts, 5 Amps, single pole, one way complete all as specified and directed.

S & F electronic energy meter tamper proof, design digital technology of SINGLE phase, 1 x 240 volts, 50 HZ, basic current for direct connected meter with LCD display, class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with fixing accessories on finished wooden box complete all as specified & directed.

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and directed. ( Note:- Excavation and Earthwork, sand cushioning and cable protection shall be measured and paid for separately)

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M & L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M & L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. ( Note : Punned thickness shall be measured for payment)

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ fly ash bricks, laid dry, flat complete all as specified and directed .

M & L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Schedule of credit amount of Rs. 2,91,450.00 to be deducted during AOC

RAVI ENTERPRISES

DOBARIA BUILDCON

Tiki Water proofing Co

Chetna Enterprises

JAIDEV SINGH CHADHA

C L BHATIA