REPAIR/ REPLACEMENT OF STEEL AND WOODEN FURNITURE FOR OTM ACCN AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of rear and front legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape complete all as specified and directed.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of front rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape complete all as specified and directed.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of rear rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape complete all as specified and directed.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of top rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape complete all as specified and directed.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of arm rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape complete all as specified and directed.

DRG NO-FD- 201 & 229: CHAIR EASY: M&L French Polishing make - Asian / Burger to Chair Easy of any description width of girth including cleaning and preparation of the surface complete all as specified and directed.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply and fixing in replacement of top 18mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified and directed.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply/ Century Ply / Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of side stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of centre stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement shutter made out of 18 mm thick prelaminated particle board as per existing size and pattern complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement side and back ply made out of 6 mm thick ply as per existing size and pattern complete all as specified and directed.

DRG NO-FD - 33, 249, 275: TABLE WRITING: M&L French Polishing to Table writing of any description width of girth including cleaning and preparing the surface for the articles of table writing complete all as specified and directed.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply/ Century Ply/ Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified and directed.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement of front/ side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existingcomplete all as specified and directed.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: M&L French Polishing to teapoy of any description width of girth including cleaning and preparing the surface for the articles of teapoy complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of front legs of existing size and shape / pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of rear legs of existing size and shape/ pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of side/front/rear rail of existing size and shape Ist class hard wood MP teak including polishing to match with the existing complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of back vertical strips as per existing size & shape of Ist class teak wood MP teak including polishing to match with the existing complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of stiffener of existing size and shape of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of back rest of of existing size and shape of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of Seat made of 75 mm thick, 32 density foam with fabricated leathorised rexine on 12 mm thick commercial ply complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of fabricated leathorised rexine on seat of chair dinning complete all as specified and directed.

DRG NO-FD/E6/MAP/10: CHAIR DINING: M & L Wooden portion shall be smoothened to apply best quality water base French polish glossy finish ( Make- Asian / Burger Paints) including cleaning and preparation of the surface complete all as specified and directed.

DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply/ Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified and directed.

DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement of drawer size 720mm x 380mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board Make - Green Ply/Century Ply/Action Tesa of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement of drawer size 350mm x 380mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board Make - Green Ply/Century Ply/Action Tesa of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of top 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply / Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all sround including polishing to match the existing complete all as specified and directed.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of front/rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing of surface to match with the existing complete all as specified and directed.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: M&L French Polishing make - Asian / Burger to Table Centre of any description width of girth including cleaning and preparation of the surface complete all as specified and directed.

DRG NO-FD & DB: RECLEANING OF CHAIRS: Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as specified and directed :- (a) Chairs dining/Chair Writing /Chair CBB/ Chair CBA 75 to 100 Gram. (b) All type of Chair Easy (c) Stool Dressing

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement top of 18mm thick pre-laminated particle board Make - Century Ply / Green Ply/Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified and directed.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of front / rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: M&L Polishing with Hi-gloss French polish Make – Asian/ Burger of any description width of girth including preparation of surface complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of 12 mm thick commercial plywood type AA ( ISI -303 Marked Make - Century Plywood of existing size and shape complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of long rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of head rest ply of 4mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of foot rest ply of 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of stiffener made out of Ist class hard wood MP teak including polishing to match with existing size and shape complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of head rest made out of Ist class hard wood MP teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of foot rest made out of Ist class hard wood MP teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified and directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparing of the surface for polish complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old existing unserviceable Seat frame and S&F new seat frame of 2nd class hard wood fixed with 04 Nos. machine screws 65 mm x 3 mm including canning with superior quality of plastic cane and applying two coats of French polish in black colour on wooden surfaces of chair CBO steel without arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Description all as per item No 55 above but chair CBO steel with arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMSDescription all as per item No 55 above but back frame of chair CBO steel without arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Description same all as per item No 55 above but back frame of chair CBO steel with arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old existing unserviceable arms and S&F new arm rest of 2nd class hard wood fixed with suitable size of screws including two coats of French polish in black colour complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old existing unserviceable flat iron runner and S&F new flat iron runner 25 x 3 mm, approximate 500 mm long including making holes for fixing end and other end welded to chair CBO steel without arm/with arms including one coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS Removing of old U/S PVC caps & shoes and S&F new PVC caps & shoes of chair CBO steel without arms/ with arms complete all as specified and directed.

DRG No. FD-75(M) REPAIR TO CHAIR CBO STEEL WITH ARMS AND WITHOUT ARMS. Description all as per item No 61 above but chair CBO steel with arms complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003 REPAIR TO STEEL TABLE CLERK Removing of existing unserviceable table top and supplying & fixing new table top 18 mm thick pre-laminated particle board teak finished on one side and another side white exterior grade, PVC moulded beading with screws and adhesive on all sides for officers table complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK. Description all as per item No 63 above but table clerk steel complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of old existing unserviceable drawer and M&L for new drawer made of 20 gauge PBI sheet for table officer/ clerk complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of existing unserviceable lock and S&F new lock with two keys suitable for above table, Godrej pattern complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of old wornout shoe and S&F new hard rubber shoe of best quality complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK Removing of old existing unserviceable decayed leg of table office officer/clerk and S&F new 25 Sqmm MS 16 gauge conduit pipe including welding and one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

DRG No. FD-84 (M) ,FD-1004, FD-1003REPAIR TO STEEL TABLE CLERK M&L for painting with one coat of synthetic enamel paint (olive green ) including removing all dents filling with putty and preparation of surfaces for table officer/ clerk complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing old U/S planks of any description and in any position and S&F new 1st class hard wood shisham seat plank of size 1525 mm x 300 mm x 25 mm thick for form without back fixed with 6 Nos bolt 08 mm dia, 65 mm long nuts with washers including two coats of french polishing to new wooden surface including preparation of new surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Description all as per item No.37 above but seat plank of size 1800 mm x 300 mm x 25 mm thick for form with back complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S back plank of form with back in any position and S&F new 1st class hard wood (Shisham) back plank of size 1800 mm x 150 mm x 25 mm thick fixed with and including 9 Nos 6 mm dia, 65 mm long bolts with nuts & washer made to shape, fixed in position including two coats of french polishing to new wooden surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S MS sheet seat of form w/o back steel and S&F 20 gauge PBI sheet seat made to shape as required including welding complete approx size 1525 mm x 300 mm including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S legs stiffener/back & bottom stiffener of form w/o back steel and form with back and S&F new legs stiffener of 25 mm dia/square 16 gauge MS conduit pipe made to shape, size as required at site welded to old frame work complete including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S clamps and S&F new clamps of MS flat iron 40 mm x 3 mm length as required at site made to shape fixed with suitable nuts and bolts and washers, fixed in position including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new surfaces complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Preparation of old surfaces of broken joints and providing running welding for jointing MS conduit pipe, MS angle and flat iron etc complete all as specified and directed ( Each joint measured separately).

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK Removing of old U/S shoes/Caps and S & F new PVC hard rubber shoe/Caps of best quality to conduit pipe legs of form with or without back complete all as specified and directed.

DRG No. FD-1027 REPAIR TO FORM WITH OUT BACK/WITH BACK M & L for one coat of synthetic enamel paint to steel surfaces including preparation of surfaces complete all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Removing of U/S steel shelves and S&F new shelves of size 3` x 1.5` made out of 20 gauge PBI sheet including fixing complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item 46 above but shelves of size 3` x 1`-3`` complete all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Description all as per item No. 46 here-in-before but shelves of size 3.5` to 4`.0 x 1.5` complete all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER Dismantling/taking down old U/S leg of rack steel and S & F new leg of MS slotted holes steel angle iron 40 x 40 x 4 mm and fixed complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface complete all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER S&F mild steel corners made out from M.S. sheet 3 mm thick size 75 x 75 mm in triangular shape fixed complete by means of welding/bolting or riveting as per site requirement including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER M&L for one coat of synthetic enamel paint including preparation of surfaces and removal of all dents, filling with putty complete all as specified and directed (Rack steel open type).

DRG No. FD-106(M), 1037 REPAIR TO STEEL RACK ADJUSTABLE 3 TIER. Description all as per item No 84 above but rack steel close type complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of old existing unserviceable lock and S&F new lock of 6 levers with two keys Godrej pattern with fittings complete all as specified & directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of old unserviceable handle and S&F new handle chromium plated screw type tightened with nuts and bolts with fittings complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable 3 way lock device with steel rod and supplying and fixing new three way locking device with 10 mm dia MS steel rods and brass shackle complete with fixing accessories for large steel almirah complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 88 above but for medium steel almirah complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable leg and S&F new legs of 16 gauge MS sheet complete including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMRemoving of unserviceable shelves of almirah large steel and supplying and fixing new MS sheet shelves made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with required clamps complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 91 here-in-before but for Almirah Medium Steel complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable shutter of almirah large steel and supply and fixing new MS sheet shutter made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with mild steel hinges complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Description all as per item No 93 above but for almirah medium complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable lock cover plate of almirah med/large and supply and fixing new MS sheet lock cover plate made out from 20 gauge PBI sheet including one coat of synthetic enamel paint over a coat of red oxide primer and fixing complete with screw bolts complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of unserviceable key plate and supplying & fixing new C P key plate with screw bolts complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMS&F clamps of suitable size with nuts and bolts with washers for shelves of almirah duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUM Removing of all dents, filling with putty and applying one coat of synthetic enamel paint (1st quality) for steel almirah large complete all as specified and directed.

DRG No. FD-243, 1031, 1032 REPAIR TO STEEL ALMIRAH LARGE/ MEDIUMDescription all as per item No 98 above but for almirah medium complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S shutter and S&F new shutter of PBI sheet 20 gauge as per existing shape and size including one coat of red oxide primer on both side of the shutter complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item 100 above but back complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 100 above but side complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 100 above but partition complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 100 above but shelves complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Description all as per item No 100 here-in-before but legs complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S Hasp and stapple and S&F new MS Hasp and stapple chromium plated as per existing shape and size complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL Taking down old U/S Handle and S&F new MS chromium plated steel Handle 100mm size complete all as specified and directed.

DRG NO. FD-1029 REPAIR TO LOCKER BED SIDE STEEL M&L for painting with one coat of synthetic enamel paint on old/new surfaces of locker bed side steel, internally and externally including preparation of old/new surface complete all as specified and directed.

DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing/ Taking down unservicveable cane from chair verandah and weaving with plastic cane 4 to 5mm wide half round superior quality of approved make complete in matt pattern including painting to frame of chair with one coat of white synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

DRG No-FD-259 REPAIR TO CHAIR VARANDAH STEEL Removing broken legs and S&F new legs made to shape as front eg arm and rear leg complete one piece of 18/19 mm dia MS conduit pipe of 1.6mm thickness including all necessary welding and painting with two coats synthetic enamel white paint over a coat of red oxide primer on new steel surface and one coat of white enamael paint over old steel painted surface including preparation of surfaces complete all as specifiec and directed.

DRG NO- FD-259 REPAIR TO CHAIR VERANDAH STEEL Removing old U/S PVC shoes and supply and fixing new PVC shoes of suitable size complete all as specified and directed.

NIHAL ENTERPRISES (BID ID -3079157)