Improvement of road from Kundheigola to Baghbar via Koradposi, Jharaberani, Tungamal from 5/920 km to 8/920 Km

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per approved Drawing & Technical Specifications and as per Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Dismantling of Cement Concrete Grade M-15 & M- 20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Removing all type of Hume Pipes Upto 600mm dia and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works including T&P, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Removing all type of Hume Pipes ABOVE 900MM and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works including T&P, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres

Excavation for road work in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment locations with all lifts & leads up to 1000m.as per approved Drawing & Technical Specifications and as per Clause - 301 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).

Loosening, leveling and Compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, compacted at OMC to achieve minimum dry density conforming to Table 300-2 with cost of all labour, machinery etc complete as per Technical Specifications and Clause - 305.3.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of embankment with approved materials deposited at site from roadway cutting and foundation excavation of CD & structures graded and compacted to meet requirement of table 300-2 including cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of embankment with approved materials obtained from borrow pits with all leads transportation to required slope & compacting by mechanical means spreading, grading to required slope & compacting to meet requirement as per approved drawing and technical specifications complete in all respect as per Section 900 and clause 305 of MoRT&H Specification for Road & Bridge works (latest revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Providing compacted granular materials in shoulder by using moorum having required P.I. value spreading in uniform layers not exceeding 100mm in depth and compacting with smoth wheeled roller to achieve the desired density including cost, conveyance, royality of moorum & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 408 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Fine dressing and turffing the slope of the embankment with compacted turff grass with carriage within 5.0km as per Clause 307of MoRT&H Specifications for Road and Bridge works (4th Revision) complet including all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge..

Providing G.S.B. Gr-VI stone screaning materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, as per approved Drawing & Technical Specifications and as per Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per approved Drawing & Technical Specifications and as per Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Providing Primer Coat with bitumen emulsion on prepared granular surface, spreading @ 0.60kg / sqm using mechanical means including cost, conveyance of of bitumen emulsion & cost of all labour, machinery etc complete as & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Tack coat with bitumen emulsion on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means including cost, conveyance of bitumen emulsion & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing 50mm thick Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & laying 25 mm thick Semi Dence Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600.1, cement content not to be less than 150kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver and compacting with vibratory roller, finishing and curing as per Clause 601 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per Clause 602 of MoSRT&H Specifications for Road & Bridge works (5th Revision)

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.

Providing & fixing RCC M-15 RCC 5th Km. stone/ Ordinary Km. stone/ Hectometer Stone of standard design as per IRC8-1980 along with reinforcement complete as per drawing as per Clause 804,806 & Section no.1000, 1500, 1600, 1700, 2300 of Specification for Road & Bridge works of Ministry of Road Transport & Highways (LatestRevision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect complete in all respect as directed by Engineer-in-Charge

Providing & fixing of RCC M-15 guard Post of 1.0m height and 15cm dia using 3.5kg steel reinforcement per each as per IRC:8-1980, fixing in position with painting & printing including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete Technical Specifications and Clause- 804 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and Section- 800, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Supplying, fitting, fixing of roads sign board as per approve drawing including cost, conveyance, royality, taxes of all materials, labour, T & P etc. providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC: 67-2010 made of A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides as per requirement in table 6.1 of IRC-67/2010 and as per technical specifically of clause 801.3 supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 40cm x 40cm x 60cm. 60cm below ground level as per approved drawing including excavation, curring etc. complete under the supervision of Engineer-in-charge. 90 cm Equilateral traingle

90 cm high octagon

60 cm x 45 cm Rectangular

90cm x 30 cm Rectangular

60 Circular

Providing, fixing of direction & place Identification Signs board more than 0.9 sqm (1800X1200MM) Size board retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 2 x 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and fixing of bi-directional retro reflective raised pavement markers of approved colour, quality & make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all materials, labour, transportation, taxes, duties, sundries, T&P etc. complete.

Providing, filling clean sand of approved quality in road work for construction of drainage layer and foundation trenches of structures in uniform layers, watered and rammed/ compacted as per approved drawing and technical specifications complete in all respect as per Section 900, 2100 and Clause 401 & 304 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in- Charge.

Providing PCC M-15 Grade of foundation work using 40 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing M15 grade Plain Cement Concrete in Sub Structure, work using 40 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Supplying , Laying & Fixing 1200mm dia NP4 RCC hume pipe in position for culvert including pointing ends , fixing collars with cement mortar (1:2) including cost conveyance and taxes of hume pipe etc complete.

RCC M-20 grade in different work using 20 to 10mm size crushed stone aggregates mixed, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision). Foundation

RCC M25 grade Reinforced Cement Concrete in Foundation work using 20 to 10mm size crushed stone aggregates mixed, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M25 grade Reinforced Cement Concrete in sub-structure work using 20 to 10mm size crushed stone aggregates mixed, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M25 grade Reinforced Cement Concrete in super-structure work using 20 to 10mm size crushed stone aggregates mixed, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing R.C.C. Crash barrier at the edge of the road,approaches to bridge structure and medians constructed with M-40 grade concrete with HYSD reinforcement confirming to IRC:21 and dowel bar 25 mm dia 450 mm long at expansion joints filled with pre moulded asphalt filler board , keyed to the structure on which it is built and installed as per design given in enclosure to M.O.R.T.H Circular No. RW?NH- 33022/1/94: DO III Dt. 26.6.1994 as per dimension in the approved drawing and at locations directed by the Engineer in charge including watering ,curing, cost conveyance royalties aof all materials with all labour required for the work complete in all respect.

Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approvrd drawing and technical specification and as per clause-1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer-in-Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)

Metal spall backing to the wall steining or weep holes of abutments, deep drain with hand brocken stone aggregates of 50mm size including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -710.1.4 of IRC 78 & Clause - 2504.2 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Gravel backing to aprons & revetments and providing filter material using gravel underneath pitching in slopes as per approved drawing and technical specifications complete in all respect as per Section 900, 1000 & 2500 of MoRT&H Specifications for Road & Bridge works (latest revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Rough stone dry packing in aprons and revetments and stone pitching in slopes and boulder approns etc with hard granite stone of size 30 cm and above as per approved drawing and technical specifications complete in all respect as per Section 900, 1000 and 2504 of MoRT&H Specifications for Road & Bridge works (latest revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical

RCC M-30 grade in wearing coat including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2702 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet & guard post including cost of Paints & cost of all labour etc complete as per Technical Specifications and Clause-803 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Please Enable Macros to View BoQ information