Loading…
Loading…
Tender Value
₹22.0 L
EMD Value
₹44,062
Closing Date
26 Sept 2025, 10:59 pmClosed
Karnataka Power Transmission Corporation Limited
Construction of periphery compound wall (towards south side) to the vacant land at 220kV Sub-Station, Ekarajapura (Call-3).
KPTCL/2025-26/OW/WORK_INDENT2653
KPTCL/2025-26/OW/WORK_INDENT2653
Open
Other Works
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bengaluru
₹560
₹44,062
7 Sept 2025
7 Sept 2025
29 Sept 2025
10 Sept 2025
Construction of periphery compound wall (towards south side) to the vacant land at 220kV Sub-Station, Ekarajapura (Call-3).
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Labour charges for obtaining 66/11 kv sub-station Ekarajapura land survey sketch from survey department duly singed by survey supervisor & fixing of bond stone by surveyer as per directions of engine...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(V-2, P-9, I-5.4)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing patti 10cm wide 10mm thick alround the parpet with C.m. 1:3 and finished as per design etc., complete. (MR).
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Running peripheral Theodalite traverse along periphery and co-ordinating and heightening of all corners/ turning points, establishing permanent coordinate axis, formation of grids at 50m intervals for...
Preparing of CAD drawings, generating the contours using appropriate software and submission of 6 sets of blue prints and one Laminated sheet original and one soft copy etc complete ( KPTCL SR 2019, ...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .