Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC SANTOKH VILA 81 1ST FLOOR PHASE XI MOHALI PUNJAB 160082 | 160082 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹12.4 L+₹11,441 (0.93%)Rejected-AOC 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | L2 | Rejected-AOC Other than lowest | |
| 3 | L3₹16.8 L+₹4.6 L (37.2%)Rejected-AOC SCO 1 SECTOR 5 MANSA DEVI COMPLEX PANCHKULA HARYANA | PANCHKULA | HARYANA | 133301 | L3 | Rejected-AOC Other than lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Auronee Das GE (Utility) Chandimandir
GE (Utility) Chandimandir
GE(U)/CHM-06/2022-23 WELCOME MAINTENANCE TO OFFRS MD ACCN UNDER AGE B/R COMD HOSP OF GE (U) CHANDIMANDIR
2022_MES_525297_1
GE(U)/CHM-06/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
Chandimandir Cantt
Please refer as per tender documents
7 documents required · 7 mandatory
₹500
GE (Utility) Chandimandir
₹50,000
Yes
26 Aug 2022
20 May 2022
29 Jun 2022
20 May 2022
27 Jun 2022
8 Jun 2022
60 days
Amount
Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge.
S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
M & L 20mm thick Granite(of any type) tiles machine cut in skirting/dado laid bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rubbing and polishing laid over and including screed 10mm thick in cement mortar 1:3 all as specified and directed by Engineer - in - Charge.
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
M & L for non skid ceramic coloured tiles with matt finish, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.
M & L vitrified ceramic light shade coloured tiles with matt finish, 10 mm thick ( square/ rectangular ) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 6 here-in-before but on vertical surface such as skirting, dado over and including 10mm thick cement sand plaster (1:3) etc complete all as specified and directed by Engineer - in - Charge.
Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge.
M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge.
M & L one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L one coat of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .
M & L two coats of distemper oil emulsion over a coat of wall putty (Asian / JK / Birla), preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.
M & L two coats of distemper oil emulsion over a coat of wall putty (Asian / JK / Birla), preparatory to distempering on old surfaces after complete removal of existing treatment all as specified and directed by Engineer - in - Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over plastered or unplastered or concrete surfaces including preparation of new surfaces complete all as specified and as directed by Engineer-in-Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over plastered or unplastered or concrete surfaces including preparation of surfaces by removal of existing treatment complete all as specified and as directed by Engineer-in-Charge.
S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .
Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.
S&F in repair bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .
S&F in repairs Pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .
S & F in repairs 15mm bore stop valve, cast copper alloy screwed down, fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.
S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm all as specified and directed by Engineer - in – Charge.
S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern), white including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device and fixing with all joints to WC pan all as specified and directed by Engineer - in - Charge .
S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed by Engineer - in - Charge .
S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve and float including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed by Engineer - in - Charge .
S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste fitting brass chromium plated and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed by Engineer - in – Charge .
S & F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste fittings, waste pipe, cast iron cantilever brackets, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with waste pipe PVC 40mm dia all as specified and directed by Engineer-in-Charge.
S & F health faucet with tube & wall hook chromium plated brass fixed to 15mm size pipe. Make : Jaquar Cat No. ALD-BLK-583 or equivalent model of make as specified in CA.
Taking down carefully aluminium / Copper point wiring (light, fan, socket or power, bell complete fittings such as sockets, ceiling roses, pendants, battens/ conduits, holders, regulators and making good the disturbed surfaces of walls, floors, ceiling etc all as specified and directed by Engineer - in - Charge
M & L point wiring complete with 1.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable drawn through in and including PVC casing and capping double locked box type with accessories fixed on surface of walls / ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per IS, terminated in terminal box including 1.5 Sqmm single core stranded / solid copper conductor 1100 volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly for One light/bell point/fan point controlled by one, one way switch all as specified and directed at site by Engineer – in – charge.
All as per Srl item No. 35 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 2.5 Sqmm single core stranded / solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.
M & L point wiring complete with 1.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable drawn through in existing conduit including 1.5 Sqmm single core stranded / solid copper conductor 1100 volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly with copper lugs inserted in existing MS boxes for One light/bell point/fan point controlled by one, one way switch all as specified and directed at site by Engineer – in – charge.
All as per item No. 37 here in before but for socket out let 3 pin 5 amp on same board all as specified and directed by Engineer - in - Charge
All as per item No. 37 here in before but for socket out let 3 pin 5 amp on independent board all as specified and directed by Engineer - in - Charge.
All as per item No. 37 here in before but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed by Engineer - in - Charge
All as per Srl item No. 37 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 2.5 Sqmm single core solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.
All as per Srl item No. 37 here-in-before but with 4 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 4 Sqmm single core stranded / solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.
S & F Modular switch 1 way 6A, 1 module, one way all as specified and directed by Engineer - in – Charge.
S & F Modular switch 1 way 16A, 1 module, one way all as specified and directed by Engineer - in – Charge.
S & F Modular Bell push 6A, 1 module, single pole one way, all as specified and directed by Engineer - in – Charge .
S&F electric call bell/ buzzer, AC, 230 volts, single pole, complete all as specified and as directed by Engineer-in-Charge.
S&F modular socket, 6A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.
S&F modular socket 6A/16A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.
S&F modular fan step regulator, 120W - 2 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 3 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 4 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 6 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 8 module all as specified and directed by Engineer-in –Charge.
S&F modular Metal flush box 6 module all as specified and directed by Engineer-in –Charge.
S&F modular Metal flush box 8 module all as specified and directed by Engineer-in –Charge.
S & F MCB distribution board of sheet metal single pole and neutral 12 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.
S & F MCB distribution board of sheet metal single pole and neutral 8 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.
S & F MCB distribution board of sheet metal single pole and neutral 4 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.
S & F MCB single pole 6 to 32 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge .
S & F MCB, Single pole & neutral, 240 Volt, 63 Amps, braking capacity 10 KA all as specified and directed by Engineer - in - Charge.
S & F MCB single pole & neutral 40 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge.
S & F MCB single pole & neutral 6 to 32 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge .
S & F MCB triple pole & neutral 63 Amp 440 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge .
Supply and fixing single pole and neutral enclosures with two pin and earth plug and socket complete with one single pole MCB 240 V 20 Amps all as specified and directed by Engineer - in - Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 63 Amps, breaking capacity 36 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 100 Amps, breaking capacity 36 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 125 Amps, breaking capacity 36 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 160 Amps, breaking capacity 16 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed agnetic setting, three pole, 250 Amps, breaking capacity 25 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 200 Amps, breaking capacity 25 KA complete all as specified and as directed by Engineer-in-Charge.
S & F PVC blanking plate for filling empty space in terminal boxes/ DBs complete all as specified and as directed by Engineer-in-Charge.
S & F ceiling rose 65 x 50mm three terminals PVC/ polycorbonate, isolated body all as specified and directed by Engineer - in - Charge .
S & F Bulk head luminaire of die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket complete with S type CFL 9/ 10 W-01 No. complete all as specified and as directed by Engineer-in-Charge.
M&L self ballasted retrofit LED tubes with PC cover/ PC body 20W with high lumens 6500K (4') complete and connecting complete all as specified and directed by Engineer-in-Charge.
M&L heavy duty batten pre coated CRCA body, suitable for retrofit LED 1X18/20W LED tube and connecting complete all as specified and directed by Engineer-in-Charge.
S & F in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 4 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 4 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 6 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 6.0 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 10 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 10 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with four single core cables PVC FRLS insulated unsheathed 10 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC FRLS insulated one single core cables 10 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables four single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with four single core cables PVC FRLS insulated unsheathed 16 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC FRLS insulated one single core cables 16 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables four single core and one single core of sizes as mentioned will considered as one unit.
M/S Gupta and Sons
PARVEEN KUMAR AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .