CA NO. CWE SGNR - 85 OF 2020-21 SPECIAL REPAIR OF EXISTING ROAD AND ROAD SIDE FURNITURE AT SASF, ODIANWALI AT MILITARY STATION FAZILKA

Amount

M &L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud , or water scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and applying evenly a tack coat with bituminous primer (VG-10) @ 10 Kg/10 Sqm for laying semidense aphaltic concrete complete all as specified and directed by Engineer-in-Charge.

Preparing WBM surfaces, by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air pressure to remove all loose dirt etc and applying evenly a tack coat using paving bitumen primer @ 7.5 Kg/10 Sqm by operated hot pressure, and laying , spreading 30mm (Consolidated thickness) bituminous premixed semi dense asphaltic concrete with design mix formula with bitumen of Grade (VG-30) not less than 5.5% of binder content by weight of total mix using mechanical paver, rolled and consolidated to required camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface etc complete all as specified and directed by Engineer-in-Charge.

Preparing existing black top surfaces , by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air pressure to remove all loose dirt etc and applying evenly a tack coat using paving bitumen primer @ 5 Kg per 10 Square metre by operated hot pressure , & laying , spreading 30mm (consolidated thickness) bituminous premixed semi dense asphaltic concrete with design mix formula with bitumen not less than 5.5% of binder content Bitumen of Grade (VG-30) by weight of total mix using mechanical paver, rolled and consolidted to required camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface etc complete all as specified and directed by Engineer-in-Charge.

M & L for painting lines, dashes, arrows, letters etc on road / pavement and like using thermoplastic road marking paint, for a dry film 2.5mm thick @ 5 Kg per Sqm. Binder contents 18.0% min, glass beads 30-40%, Titanium, Dioxide 10.0% min, CaCos and inert fillers 42.0 max, including preparation of old / new surface complete all as specified and directed by Engineer-in-Charge. Make : Reliance / Shivalik / Swastic

S&F in replacement Solar road stud 125mmx125mmx25mm made from aluminium alloy and consctruction powered by mono crystal solar panel with high capacity Ni-Cd rechargeble battery having view distance 1000 meters LEDs-10mm, 6 pieces for high brightness, 12 hours of continues lighting at night complete all as specified and directed by Engineer-in-Charge. Make - Model Dhruv -DA- 110 of sinor infrastructure of equivalent model of dark eye/Greenlite/TATA BP.

S&f in repairs solar delineators (1000x47mm) made out of polycarbonate and toughened aluminium body fitted with high intensity retro reflector in yellow / red colour fitted on CRCA pipe 47 mm dia and 60 cm long powdr coated or stove enamelled white / black colour provided with steel wire mesh made up in to cage for sefety of reflector and embedding the same in PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. Make - International Wire ( Model No. IWP5) or equivalent of dark eye/ Surya enterprises / greenlite / TATA BP. Note size of PCC block for embedding delinator shall be 30cmx30cmx30cm and cost of PCC shall be included in the unit rate of this item.

S&F in replacement of dual directional reflective cat eye of size 100mm x 100mm of impact resistance ABS plastic stud having ultra violet resistance colour with plastic strip containing 31 mini retro reflective glass beads of colour white/red/yellow to each side and fixed with 12mm dia 120mm long zinc plated steel nails at the centre of cats eye by hammering complete all as specified and directed by Engineer-in-Charge. Make : Dark Eye (Model No. DA 978) or equivalent of international Wire product//Greenlite/TATA BP

Desmantling floor, hearth or wall tilling including cement mortor bedding,(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolation of cement concrete in ground floor and paving n.exc 15cm below or above ground complete all as specified and directed by Engineer-in-Charge.

M&L Chequered Cement Concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bedding layers in CM 1:4 complete with grey cement & pigments complete all as specified and directed by Engineer-in-Charge.

M&L for 80mm thick coloured ( Red / Yellow ), designed, machine pressed precast conctete interlocking paver block (ISI marked) (factory casted) using grey cement and pigment and of any shape and size as directed conforming to IS 15658-2006 having compressive strength not less than 400 Kg/Sqcm laid over and including 50mm thick layer of sand including filling the interstices complete all as specified and directed by Engineer-in-Charge.

M&L Precast cement concrete kerb block size not less than 10cmx30cm and length not less than 30 cm ( except on curve) type C1 1:3:6 ( 20 mm graded aggregate) with plain fair faces, including chamfers/weathering , throating etc. setting in mortor 1:6 and stuck flush completed with joints to match complete all as specified and directed by Engineer-in-Charge. ...................................................................................................................... Note : A sum of Rs. 2,850.00 will be deducted on account of credit for taken down material. Please refer details on Srl Page No. 18 (Schedule of Credit) of Tender documents.

M/s Amit Construction Company