REPAIR TO COMPOUND WALL FENCING CONCERTINA COIL AND MISC B/R ITEMS AND REPAIR/MAINT OF INTERNAL ELECTRIFICATION AND OTHER E/M RELATED MAINT SERVICES IN ZONE D AREA UNDER GE EAST MATHURA

Amount

Taking down cement plaster on brick or stone walls, concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 surface finished even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 surface finished even & fair complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 surface finished even & fair complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) complete all as specified and as directed.

M&L 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

M&L for glossy pattern Chequred Cement concrete coloured tiles with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.6 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Excavation in post hole (or similar hole) each n exc 0.5 cum each and getting out, returning filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground and making good disturbed area complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling galvanised 2 strand, steel barbed wire in fencing complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc complete as specified and as directed Note: (Each line wire to be measured)

Restraining and resecuring including making good staples etc of Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing fixed to any type of straining bolts all as specified and as directed.

S&F galvanised punched type concertina coil of loop dia 450 mm (dia of coil when unstretched) fixed to existing angle post strut and tying at three places ie two bottom & one at top with 3.15 mm dia galvanised mild steel wire complete as specified and as directed

Fixing only chain link fencing including line wire any mesh, size and tied to any type of standards, rails, straining bolts etc including provision of binding wire. complete all as specified and as directed.

Supply only chain link having MS galvanised wire and mesh of size 50mmx50mm complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed.

S&F mild steel round bars 10mm dia cut to length, bent to shape required bent to shape hoking end required and fixed in fencing confirming to Fe 410-W (Gde E-250) or Fe 290 (Gde E-165) complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work using old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of red oxide primer complete as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over and including a coat of primer complete all as specified and as directed.

M&L for prepration of newly plastered surface of walls and applying two coat of oil bound distemper over and including a coat of alklai resitant primer complete all as specified and as directed.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.

Taking down carefully by Submain wiring of any type making good the disturbed surface to match with existing surface complete all as specified and as directed.

Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as specified and directed.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated (FRLS) cable 1100 volts grade with multi-stranded, copper conductor drawn through and including 20mm dia rigid non-metallic PVC conduit with all acessories such as internal bend end caps etc complete fixed on walls/ceiling/roof etc by means of suitable GI saddles/Spacers and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistrandered copper conductor cable as earth continuity conductor, fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls with 3mm thick bakelite top cover sheet ISI marked with chrominium plated screws and cup washers for housing the switches, socket outlets fan regulators etc complete all as specified and as directed the followngs:-

One light/fan/exhaust fan point controlled by one way switch complete all as specified and as directed.

One light point controlled by two way switch complete all as specified and as directed.

One bell point controlled by one push button on independent board complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on same board complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.

M&L for Point wiring with 2.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 2.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II and as directed.

M&L for Point wiring with 4 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 2.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II and as directed.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.

Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.

Supply and Fixing Modular bell push 6 Amps one module complete all as specified and as directed.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed.

Supply and Fixing switch piano flush type 5 Amps single pole one-way complete all as specified and as directed.

Supply and Fixing socket outlet flush type 2-in-1, 3 pins 5 Amps multipurpose complete all as specified and as directed.

Supply and Fixing switch flush type 2-in-1,3 and 5 pins 15 Amps multipurpose complete all as specified and as directed.

Supply and Fixing socket outlet flush type 2-in-1,3 and 6 pins 15 Amps multipurpose complete all as specified and as directed.

Supply and Fixing switch piano flush type 5 Amps single pole two-way complete all as specified and as directed.

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.

Supply and Fixing bell Push switch flush type 6 Amps single pole one-way complete all as specified and as directed.

Supply and fixing Bell Multi Music type, 230 Volts complete with connection complete all as specified and as directed.

M&L for Sub Main Wiring with 4 runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire complete all as specified and as directed. Note: Four runs 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

M&L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement of LED T-5 Intergrated Batten PC housing extruded 2' light fittings 9W complete with all acessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement of Recess Type LED light fitting 2X2, Square shape 24W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F in replacement of Recess Type LED adjustable downlighter with COB technology round shape 18W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F in replacement of Recess Type LED light fitting 2X2, Square shape 36W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F in replacement of Recess Type LED light fitting 2X2, Square shape 30W, 230V, complete with all acessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.

S&F LED retrofit lamp 9 Watt complete all as specified and as directed.

S&F in replacement decorative wall light fitting stainless steel rust free fixture with white glass diffuser with 7.5/9W LED lamp complete all as specified and as directed.

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, LED Bulk Head fitting of 10 Watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed.

S&F in replacement of building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 30 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core copper conductor cable with suitable size complete all as specified and as directed.

Supply & fixing MS louvers with nuts, bolts and washers suitable for exhaust fan upto 350 mm sweep of any description/make/model complete all as specified and as directed.

Supply & fixing MS louvers with nuts, bolts and washers suitable for exhaust fan upto 450 mm sweep of any description/make/model complete all as specified and as directed.

S&F PVC insulated sheathed 1.5 sqmm 3 core cable 1100 volts grade ISI marked copper conductor complete all as specified and as directed.

S&F PVC insulated sheathed 2.5 sqmm 3 core cable 1100 volts grade ISI marked copper conductor complete all as specified and as directed.

Supply only down rod MS grade 15 mm bore of length upto 90 cm size for ceiling fans of any type and size including cutting, drilling holes, making thread and painting complete all as specified and as directed.

Supply and fixing in replacement step type electronic fan regulator switch type on the existing phenolic laminated sheet including taking down the old unserviceable one complete all as specified and as directed.

Supply and fixing in replacement step type electronic fan regulator socket type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply only capacitors 2.5 MFD suitable for all types of fans complete all as specified and as directed.

S&F TP&N Vertical Loadline distribution board, 8 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 250Amp, two neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 8 way complete with provision for 125 Amps MCCB as incomer including fitting suitable for MCBs with connection complete all as specified and as directed Note : - (i) MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items. (ii) MCB & MCB/MCCB DBs shall be measured and paid separtely under relevant items of this BOQ.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 250Amp, two neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete with provision for 63Amps MCCB as incomer including fitting suitable for MCBs with connection complete all as specified and as directed Note : - (i) MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items. (ii) MCB & MCB/MCCB DBs shall be measured and paid separtely under relevant items of this BOQ.

S&F sheet metal enclosure MCB distribution board, TPN 4Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 8Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 6Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 4Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

Supply and fix SP enclosure modular type with a two pin and earth plug and socket complete with SP MCB of rating 20-32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing in replacement of MCCB 125 Amp rating, (ICS=100% of ICU) 4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA complete all as specified and as directed.

S&F MCCB 63 Amps, 'C' series, breacking capacity 16KA, 4 pole, 240V complete all as specified and as directed.

S&F MCB TPN 40 to 100 Amps, 'C' series, breaking capacity 10KA, 415V including taking down old MCB's complete all as specified and as directed.

S&F MCB TP 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F MCB DP 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

Supply & fixing of MCB SP 6-32 Amps, 'B' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F modular white cover plate with frame, 1 module complete all as specified and as directed.

S&F modular white cover plate with frame, 2 module complete all as specified and as directed.

S&F modular white cover plate with frame, 3 module complete all as specified and as directed.

S&F modular white cover plate with frame, 4 module complete all as specified and as directed.

S&F modular white cover plate with frame, 6 module complete all as specified and as directed.

S&F modular white cover plate with frame, 8 module complete all as specified and as directed.

S&F Modular metal flush sunken box 1/2 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 3 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 4 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 6 Module complete all as specified and as directed.

S&F Modular metal flush sunken box 8 Module complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of stove enamelled steel conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof including cutting & chases ( making good all to the disturbed surfaces as per existing) and including with metal boxes with sheet suitable for mounting existing switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 1.5 Sqmm size in green colour for one light/fan point controlled by one switch complete all as specified and as directed.

S&F switch flameproof rotary type with termination box in LM6, 16 Amps single pole, 250 volt complete all as specified and as directed.

S&F LED light fittings 2x16/20 Watt Flame proof, CMRI certified recommended for gas/vapor group of II A & III B Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light, fixture, driver, holders, connector etc. complete with all accessories prewired and including connecting up and 3 core FRLS copper conductor cable with suitable size complete all as specified and as directed.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

B S ENTERPRISES

SHYAMA CONSTRUCTION

M/s Hoti Lal Contractor