CERTAIN REPAIRS TO DRAINS, PATHS, HARD STANDINGS, FENCINGS, COMPOUND WALL, GATE, RETAINING WALLS, CLEANING OF SEPTIC TANKS AND SOAKAGE WELL OF ARMY UNITS UNDER ZONE-II AT DHARMUND UNDER AGE (I) BHALRA

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Material and Labour for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

All as per description of item No 2 above but except brick, complete all as specified and directed.

Walling of random rubble stone masonry with best quality harder stone such as granite, trap or basalt, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), brought upto courses complete all as specified and directed. Note:- PCC bond stones shall be used in lieu of stone bond stones. These shall be measured and paid separately. Deduction of volume occupied by PCC bond stones shall be made from stone masonry.

All as per description of item No 4 above but except stone, complete all as specified and directed.

Providing precast cement concrete 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in bond stone (for stone walling) including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified.

Material and Labour for Raised pointing to random rubble masonary, or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified and directed.

Material and Labour for Plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Material and Labour for PVC (SWR) pipes 110mm bore any length single socketed with rubber ring joint laid in weep holes, fixed, complete all as specified and directed.

Material and Labour for Broken stone or boulders in hand packing (any thickness) at back of walls etc. and raising (or lowering) to the required level, complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Material and Labour for preparing newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Material and Labour for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and directed.

Material & labour for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

Material and Labour for 100mm thick plain cement concrete 1:2:4 type B-1 (20mm graded crushed aggregate) as in hardstanding/ path, finishing surface even & fair, complete all as specified and directed.

Material and Labour for Forming contraction (Dummy) joints 100mm deep x 10mm wide filled with sealing compound in Grade 'B', complete all as specified and directed.

Dismantling of cement concrete/interlocking floor tiles including cement mortar bedding (but not backing), removing rubbish off the premises outside MoD area all as specified and directed.

Material and Labour for Chequered cement concrete tiles 300x300x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & labour for Machine pressed precast concrete interlocking paver block any shape and size as approved by GE confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over and including 25mm thick sand cushioning, complete all as specified and directed.

Material and Labour for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified.

Material and Labour for Extra for forming fair finished drain or channel 60cm inner girth in cement concrete using extra cement including necessary form work complete all as specified.

Material and Labour for TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out any type of soil, returning,filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm, all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion by demolation of cement concrete or any type of work all as specified.

Materil and Labour for PCC 1:3:6 type C2 (40mm graded aggregate) as in foundation, filling and mass concrete, all as specified and directed.

Material and labour for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, complete all as specified and directed.

Fixing only for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, complete all as specified and directed.

Dismantling security fencing wire any type (babed wire, chinling fencing, GI mesh etc) all as specified and directed.

Supply only Chain link MS galvanised fencing conforming to IS 2721: 2003 including line wires of 3.15mm dia straining bolts, etc including provision of binding wire all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-410W (Gde-E-250) quality - A complete all as specified.

Material and labour for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

Material and labour for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Cleaning of water tank 500ltr to 1000 ltr and removing all scale and dirt etc. from tank and from mouths of circulating pipes etc . and hoisting, reconnecting and refixing in position and writing the item “ Tank cleaning on ---- including the date, month and year of the cleaning on External wall of tanks with synthetic enamel paint all as specified and directed.

Cleaning of water tank 250ltr to 500 ltr and removing all scale and dirt etc. from tank and from mouths of circulating pipes etc . and hoisting, reconnecting and refixing in position and writing the item “ Tank cleaning on ---- including the date, month and year of the cleaning on External wall of tanks with synthetic enamel paint all as specified and directed.

Desludging / dewatering / pumping/ bailing out of contaminated water including cleaning of sludge, scum, silt (both organic and inorganic nature) and night soil from septic tank/soakage wells alongwith inlet / outlet chambers, manholes, soakage pits etc. of any capacity after plugging the incoming sewage lines by suction (vaccum) type machine mounted on LCV facility of high pressure vaccum including removing the contaminated water in same tank to a place outside cantonment to a distance exceeding 50 mtr but not exceeding 100 mtr and burying in pits including rough excavation of pits and carriage of sludge to pits including spreading well in pits after burying of sludge, covering the pits with 25cm thick layer of earth and spreading bleaching powder over the covered area, complete all as specified & directed.

Cleaning the blockage in IWC, EWC including rodding of CI pipe after opening the oval access door of CI bend, chamber etc. upto septic tank and including replacing the chamber cover etc. in position and removing the rubbish to a distance not exceeding 50mtr outside cantonment complete all as specified and directed.

Ceaning / clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & de-chocking of drains as well as manholes with combined high pressure rodding and flushing after clearing of manholes, including removing the sludge in the tank to a place outside cantonment at the place meant for the purpose by local municipality, all as directed by Engineer-in-Charge. Note : The contractor shall keep the sewage line functional throughout the contract period. The unit rate quoted by the contractor shall be deemed to be inclusive this aspect.

VEER TRADERS (BID ID -3100787)

pargal builders (BID ID -3104655)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3101823)

SAHIL PROCH (BID ID -3102868)