REAPAIR REPLACEMENT REROUTING OF RISING MAIN CI DI MS PIPE LINE AND CONNECTED WORKS AT NODAL POINT I IN THE AREA OF AGE WATER SUPPLY NO III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line in ordinary soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

- do- all as per Srl No. 1 above but in mud soil.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed

Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and as directed

Taking up existing CI/DI/GI/MS water mains of the following bore size including all fittings complete all as specified and as directed

600 mm bore dia pipe.

400 mm bore dia pipe.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

Laying only, jointing, testing and commissioning of Pipe CI./DI following dia (Dismantled above against item ) in to trenches in position complete all as specified and as directed.

400 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

Supplying, laying jointing testing MS(ERW) pipe, Heavy duty of size the following sizes 6 mm thick confirming to IS - 3589 complete all as specified and as directed. (Note : Welded flanges will be measured and paid seperately.)

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

Supplying, Laying, jointing, testing and commmisioning of DI Pipe of following sizes, with spigot and socketed ends centrifugally cast Class K-7 Push on joint confirming to IS 8329 laid in trenches complete all as specified and as directed.

600 mm bore dia pipe.

400 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

M&LCI fittings for spigot/socket pipes such as bends of any radious and angle, collars, tapers, tail pieces, Tee pieces, Caps and plugs suitable above 150 mm bore dia all socketed or socket and spigot or side flanged complete as specified and as directed.

Material and labour for Run lead joint including jointing material for CI/DI pipe of the following sizes.

600 mm bore dia pipe.

400 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

Material and labour for Rubber Gasket Joint (tyton joint) including jointing material for DI/CI pipe of following sizes complete as specified and as directed.

600 mm bore dia pipe.

400 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

Supply and fixing welded to flanges on ends of MS pipe of size following bore, flange not less than 15m thick complete all as specified and as directed of following sizes :-

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

M&L Joints with rubber or fibre board gasket of following size of bore complete with nut,bolt and double washers.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

Supplying & Fixing , jointing and testing of cast iron Sluice Valve ISI marked (PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets complete all as specified and as directed.

Same as above but 600 mm bore dia pipe.

Same as above but 400 mm bore dia pipe.

Same as above but 350 mm bore dia pipe.

Same as above but 300 mm bore dia pipe.

Same as above but 250 mm bore dia pipe.

Supply and fixing CI Non return Valve with GM seat, PN-1.0 ISI mark, including flange joints such as packing, nut and bolts etc etc.

Same as above but 350 mm bore dia pipe.

Same as above but 300 mm bore dia pipe.

Same as above but 250 mm bore dia pipe.

Supply and fixing CI Foot valve flanges ends as per IS 4038 including flange joints such as packing, nut and bolts etc etc.

Same as above but 350 mm bore dia pipe.

Same as above but 300 mm bore dia pipe.

Same as above but 250 mm bore dia pipe.

Supplying and fixcing CI Strainer flanged ends of the followings including taking out & depositing to MES Store and jointing materials such as packing, nuts bolts, and washers etc.

Same as above but 400 mm bore dia pipe.

Same as above but 250 mm bore dia pipe.

Same as above but 200 mm bore dia pipe.

Supply and fixing CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 200 mm bore etc.

Supply and fixing CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 150 mm bore etc.

Supply and fixing CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 100 mm bore etc.

PCC (1:4:8) type B-2 finished even and smoooth without using extra cement for foundation

PCC (1:2:4) type B-1 finished even and smoooth without using extra cement as on brick pillars complete all as specified and directed.

Rendering 10 mm thick plaster on brick work/concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Labour for cutting of existing CI / DI pipe for insertion of CI specials /valves etc. all as required including dewatering of lekage water complete all as specified and as directed of following size :-

400 mm bore dia pipe.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

Surface Excavation not exceeding 30 cm deep averaging 15 cm deep for cleaning the area by cutting the unwanted bushes/vegitation growth in and around athe are of installation/around the valve pit chamber/along the pipe line routes if reqd etc and getting out soft/loose soil complete all as specified and as directed

Repair to Water Level Indicator (Mechinical type) installed at semi under ground water reserviors including providing greasing the pully, including adjustment of steel rope/float ball for its proper calibration and replacement of existing unserviceable nut and bolt, pully, float ball and steel rope making functional for its smooth effecient functioning complete all as specified and as directed. Note:- Float ball and steel rope shall be measured and paid for seperately.

Supply and fixing float ball of size 300 mm dia, made out from copper sheet in two halves duly soldered the make ball leak proof complete all as specified and as direced. (As per available sample weight not less than 1.2 Kg)

Supply and fixing steel rope stranded(flexibleP 3 mm dia complete all as specified and as directed(as per sample).

M&L for painting of existing Steel/RCC surface with two coat of Black/Blue colour synthetic enamelled paint including preparation of surfaces.

M&L for writing letter or figures (Block, Roman, Italic of Indian) not exc 30cm high, l;etter shall be painted with thick synthetic enamel paint so that they stand out boldly and solidly without showing signs or brush mark.

Material and labour for Wire mesh (expanded metal jalli XPM

An amount of Rs 370850.00 shall be deducted from BOQ on account of schedule of credit

STAR CONSTRUCTION CO

Rahul Enterprises

Deven Associates

Akarsha Enterprises