Renovation of existing Multipurpose Hall and Library in the premises of Campus School at CCS HAU, Hisar (including public health and electrical works)

Amount

Civil work 1 to 49:- Disposal of Earth with a lead of 2 kilometer including loading, unloading excavation etc complete. (HSR 3.1.2)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 4.14.1 All kinds of soil. (HSR 4.14.1)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (HSR 5.7.4)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge.(HSR 5.25)

Dismantling doors, windows and clerestory doors (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres (HSR 5.29.1 )

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres (HSR 5.29.2 )

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. (HSR 5.42)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (HSR 5.45)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (HSR 5.70)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) (HSR 6.1.2)

Making plinth protection 50mm thick of cement concrete 1 :3:6 (1 sqm cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (HSR 6.13)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 cum graded stone aggregate 20 mm nominal size) (HSR 6.15.1)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size). (HSR 6.16)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1 ½ coarse sand(zone-111) : 3 graded stone aggregate 20mm nominal size). (HSR 6.21)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D kg or more. (HSR 6.33.6 & 6.34.6)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.21.1)

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.22.1)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick tapered edge gypsum fire resistant board sqm conforming to IS: 2095- Part I (HSR 9.46.5)

Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling. (HSR 10.1)

Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth (HSR 10.100.2)

12 mm cement plaster of mix : 11.5.3 1 :4 (1 cement: 4 fine sand) (HSR 11.5.3)

15 mm cement plaster on the rough side of single or half brick wall of mix : 11.6.1 1 :4 (1 cement: 4 fine sand) (HSR 11.6.1)

Rough cast plaster up to 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 1 O mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm c+C32ement plaster 1 :4 (1 cement : 4 coarse sand) and top layer 1 O mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement (HSR 11.32.1)

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58)

Distempering with 1st quality acrylic distemper (ready mixed) having voe content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work (HSR 11.65.1)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer (HSR 11.67.1)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 11.76)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 11.77)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 11.78)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied@ 3.84 kg/10 sqm) (HSR 11.93.1)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (HSR 12.37.1)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete (HSR 13.29.1)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 1 O cm. (c) third layer of 1.5 mm thickness consisting of sluny of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured (HSR 28.16)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (HSR 30.17)

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (HSR 30.19)

Flush pointing with cement mortar 1: 3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for prefixed flat tile bricks on top of mud phaska: With F.P.S. brick tiles (HSR 30.20.1)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (HSR 30.21)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance i!: 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main 'T'. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 (HSR 32.47.1)

Applying epoxy mortar over leached, honey combed and spalled concrete surface and exposed steel reinforcement complete as per Technical Specification (HSR 35.21)

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. (HSR 30.18)

Providing and applying 4 mm thick self leveling PU (Polyurethane) flooring of approved make laid in any pattern as specified consisting of Priming/base coat 1 mm thick Duracrete 1000 @ l litre per 10 square metre and 3 mm thick Duracrete 3000 @ 3.36 litre per 10 square meter in approved shade & colour after preparation of existing concrete flooring (excluding coat of concrete flooring) using vaccume cleaner including cost of petty items, complete in all respect as directed by Engineer-in-Charge. (NS)

Dismantling/Removing of Polymer board fixed on wall for sound proofing system and shifting the dismantled material to maintenance store with a lead of 1 KM,complete in all respect as directed by Engineer-in-Charge. (NS)

Providing and fixing self supported 1.00 mm thick {base metal thickness 1 mm (tolerance as ± 0.02 mm) & total coated thickness 1.075 mm (tolerance as ± 0.02 mm)} colour coated galvalume high tensile steel sheets in curved corrugated roofing with provision of hangers for false ceililngs as per specification of ASTM A 792 standards with coating mass of AZ-150 (150 gm/sqm on both sides) and regular polymer coat of 20 micron on top coat over 7 micron of primer and 8 micron on bottom coat over 7 micron of primer of Proflex Systems make or any other approved equivalent make, at all height, includihng anchor fasteners, washers, EPOXY lacquer, rubber paint, galvalume light hangers, cladding sheet, turbo ventilaters, (aluminium) of size 24", skylights of 2 mm thick polycarbonate sheet of size 2 feet x 14 feet to be installed at a distance of 30 feet along the length of building, all kinds of nuts & bolts having relevancy of providing such roofs,complete in all respects as per drawing and design or as directed by Engineer-in-Charge. The colour pattern shall be as approved by Engineer-in-Charge. The steel sheet/coil shall be of 3'-0" (914 mm) width (tolerance ± 2.00 mm) which shall be curved and moulded using mechanical means to desired curves & shapes to form 2 feet (650 mm) approximately wide interlocking panels. The coil/sheet shall be from any of the given makes i.e. Thyssen Krupps Germany, Dongbu Steel Co. Limited Korea, Corus Steel,, U.K., Dofasco Steel, Canada, Bethelehem Steels U.S.A., Bluescope Australia. The measurment for payment shall be done on per sqm of finished/laid area as per actual dimensions of laid roof (covered roof with measurment taken from the hem-top end of the panels). (NS)

Providing and fixing 8.30 mm thick wooden laminate flooring of Vista make (shade VFF- 106- Java Teak) laid over existing cement concrete flooring consisting of following:- Laying polythene sheet on existing concrete flooring. 4 mm thick foam placed on existing flooring. Finished layer of 8.30 mm thick wooden laminated floor of Vista make (cutting wooden panel as per site requirement i.e. adjoining stage & 1st row of chairs in curvature). Wooden reducer profile at stepping of floor at entrances and towards press gallery portion. Removing and re-fixing of existing wooden skirting adjoining stage before laying the floor. Including cost of gutties, nails, screws etc., complete in all respects as directed by Engineer-in-charge. (NS)

Providing and fixing 0’-4” high and 8.30 mm thick wooden laminate skirting of Vista make including cost of nails, screws, gutties etc., complete in all respects as directed by Engineer-in-charge. (NS)

Providing and fixing accoustical treatment on wall consisting of following:- (i) Frame work made of factory manufactured G.I. Chanel of size 50mm X 38mm X 0.8 mm thick cross wise @ 2’-0” C/C (ii) Fibre Reinforced Glass Wool 50mm thick having 24kg/cum density (iii) Chicken mesh of size 1/2" x 1/2" made of 28 gauge wire of required shape (iv) Hasien cloth of approved make and colour to cover mineral wool (v) 12mm thick fultone perforated tiles of size 595mm x 595mm of make SAINT GOBAIN/LA-GYP as approved by the Engineer-in-charge Including cost of cutting, fastners, primer, painting, nails, screws, fevicol, tap jointing etc., complete in all respect as directed by Engineer in Charge or as per architectural drawing. (NS)

Mirror polishing on marble work/Granite work/ Kotah stone/ Terrazo in flooring, skirting, hand rail etc., to give high gloss finish complete in all respect as directed by Engineer-in-charge. (NS)

Earth filling under floors with dune sand (tiba sand), brought from out side (any lead), in 15 cm layer including laying, dressing, watering ramming, consolidating, excavation, carriage, loading, unloading and compensation, etc., complete (NS)

Providing and fixing 1.25mm Thick Polycarbonate sheet on existing gates and windows including the cost of nuts, bolts, welding etc., (excluding cost of frame and M.S. flat), complete in all respect as directed by of Engineer-in-charge. (NS)

Public Health work 50 to 116:- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (HSR 4.14.1)

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 sqm mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. (HSR 5.42)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead). (HSR 5.45)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)(HSR 6.1.2)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size). (HSR 6.16)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc.complete in all respect above plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, over1aps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D or more (HSR 6.34.6)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.21.2)

Half brick masonry with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level. Cement mortar 1 :4 ( 1 cement :4 coarse sand) (HSR 7 .28.2)

Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling. (HSR 10.1)

Providing and fixing granite stone in all shades 15mm to 18 mm thick in sqm skirting /dado/worktop/risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. (HSR 10.51)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.62)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (HSR 10.63.2)

12 mm cement plaster of mix : 1 :6 (1 cement: 6 fine sand) (HSR 11.5.4)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1 :4 (1 cement: 4 fine sand) (HSR 11.11.2)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (HSR 11.60)

Distempering with 1st quality acrylic distemper (ready mixed) having voe content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work (HSR 11.65.1)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer (HSR 11.67.1)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 11.76)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 11.77)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 11.78)

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (HSR 12.36.1)

Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm (HSR 12.98.2 )

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to metre each jamb (HSR 13.3.2.1)

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required 11.43 cm thick wall (HSR 20.26.1)

22.86 cm thick wall (HSR 20.26.2)

Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site (HSR 20.36)

Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benchingb 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C.topping (HSR 21.84.1)

Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) (HSR 21.84.2)

Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) (HSR 21.84.3)

Extra for every 0.30 metre depth of Inspection chamber 600 mm x 900 mm inside (HSR 21.85.3)

White vitreous chinaware Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISi Marked (HSR 22.1.9)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia (HSR 22.14.2.1)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (HSR 22.15)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (HSR 22.22.1)

Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required 2 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (HSR 22.26.1)

Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern (HSR 22.26.4)

Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR 22.33)

Providing and fixing 8 mm dia C.P.S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (HSR 22.38)

Providing and fixing partitions for different type of urinals. Large size 835mm x 355 mm White (HSR 22.50.1.2.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes (HSR 22.86.2)

25 mm nominal outer dia Pipes (HSR 22.86.3)

32 mm nominal outer dia Pipes (HSR 22.86.4)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore (HSR 22.104.1)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (HSR 22.107.1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (HSR 22.108.1)

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design 200 mm diameter S.W. pipe (HSR 22.164.3)

250 mm diameter S.W. pipe (HSR 22.164.4)

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1 :4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design With common burnt clay non-modular bricks of class designation 7.5 (HSR 22.207.1)

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B 90 mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.3)

75 mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.4)

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four Nos. longitudinal & 9 Nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. (HSR 33.5)

Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia (HSR 33.9.3)

Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. (HSR 33.12)

Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (HSR 33.13)

Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (HSR 33.14)

Laying and fixing dismantling white or coloured glazed tiles (to be carefully removed) and disposal Meterial with a lead of 1 Km, complete in all respect as directed by Engineer-In-Charge.(NS)

Supply of CPVC Union couplings with brass internal fittings, complete in all respect. (NS) Make:- Prince/Supreme/Skipper/Astral For 25 mm nominal outer dia Pipes

For 32 mm nominal outer dia Pipes

Supply and fixing of PVC floor traps (Heavy duty) of 90 mm o/dia outlet of Prince /Supreme/Skipper make, complete in all respect. (NS)

Supply and fixing of PVC gully traps (Heavy duty) of 100 mm dia size ( 4") with cover and frame of Prince/Supreme/skipper make complete in all respect. (NS)

Providing and fixing of UPVC specials of Prince / Supreme/Skipper make as per detail given below:- (NS) (i) Elbow 4" i/dia size

(ii) Elbow 3" i/dia size

Providing and fixing looking mirror 5.0 mm thikc in differnt sizes mounted on asbestos sheet ground fixed in position by means of 4 Nos. C.P. brass screws and washers on rubber washers and rawl plugs embeded in wall or CP brass clamps with CP brass screws etc. complete in all respect. Make:- Saint Gobain/MODI/ATUL (NS)

Supply of CPVC ball valves with brass internals of Prince/Supreme/Skipper make . (NS) (a) For 25 mm outer dia pipes

(b) For 32 mm outer dia pipes

Supplying, assembling, lowering and fixing of PVC 6 kg pressure pipes of following Dia's, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineering-in-charge. Make:- Supreme/Finolex/Skipper/Prince. (NS) (i) 200 mm dia

(ii) 250 mm dia

Electrical work 117 to 236:- Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 16 amp to 100amp 415V 25KA 3Phase (HSR 23.22.1.3)

200 to 250Amp 415V 25KA 3 Phase (HSR 23.22.1.5)

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections: 6 to 32 amp. MCB SP (HSR 23.22.5.1)

40 to 63 amp. MCB TPN (HSR 23.22.5.8)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. 8 Way TP&N ( Hori) 8+24 ( D/D) (HSR 23.22.4.7)

Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC Pipe of 25mm dia (HSR 23.7.6.2)

Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 4 sqmm (HSR 24.2.6.3)

6 sqmm (HSR 24.2.6.4)

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 Amp 1 Way Switch (HSR 23.8.11.1)

15 amp. 1 way Switch (HSR 23.8.11.3)

5 amp. Socket (HSR 23.8.11.4)

15 amp. 6 pin Socket (HSR 23.8.11.5)

Step type Fan Regulator 2 modules 300 watt (HSR 23.8.11.7)

Blinking plate (HSR 23.8.11.10)

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 2 Modules (HSR 23.8.10.1)

6 Modules (HSR 23.8.10.4)

12 Modules (HSR 23.8.10.6)

SITC of Cat-6 Cable for data including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge. (HSR 23.23.9)

SITC of Data Point Switch including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge. (HSR 23.8.11.11)

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. (HSR 24.1.3)

Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode. (HSR 24.1.5)

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. (HSR 24.1.7)

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. (HSR 24.1.8)

S/E of recessed type 42 watt full window glare free opal difffuse LED panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white housing. Total system lumen of 42 watt LED should be 5100 or above in cool day light (5600k to 6500k), Power factor >0.95, CRI (Ra) >80, LED lamp efficiency ≥140 lm/w, Average life >50000hours, complete with all accessories as required with connections. (Industrial) Make Havells , Philiphs (NS)

S/E of AC ceiling fan capacitor type complete with shackle, 300 mm down rod etc 1400 mm sweep. Make Orient , USHA,Crompton (NS)

S/I/T/C of UPS 10 KVA/9KW 3 Phase in / 1 Phase out with input nominal voltage 3*400VAC ( 3P+N) , voltage Range 190-520VAC ( 3 Phase ) 2 50% load and 305-478VAC ( 3 Phase ) @ 100% load , frequency Range 46-54 Hz or 56-64 Hz , P.F >/= 0.99 @ 100% Load , Output voltage 208/220/230/240VAC , Ac Voltasge regulation ( Batt. Mode ) +/- 1% , current ration 3:1 max , Harmonic distortion < 2%THD ( LINEAR LOAD ) < 5% THD ( Non-Linear Load ) , Transfer Time AC mode to Battery mode is zero , Inverter to Bypass is Zero , Waveform ( Batt. Mode ) Pure Sinewave , Efficiency AC Mode : 91.5% , ECO Mode : 97.0% , Battery Mode : 87% , Battery charging current (max.) 10 Amp , Charging voltage 273VDC+-1% , LCD Panel for UPS Status , Load Level , Battery Level , Input/Output voltage , Discharge timer and Fault conditions , Alarm Battery Mode sounding every 4 seconds , Low battery sounding every second , overload sounding twice every second , fault continous sounding , domension 592*250*576mm , net weight 28Kgs , operating Humidity 0-95% RH @ 0-40C ( Non0condensing) Noise level Less than 58dB@ 1 Meter , Smart RS-232/USB , support windows with suitable capacity batteries 2000/2003/XP/Vista/2008 Windows 7/8 Linux and MAC Make Luminous, Nexus , Microtek. having inbuilt phase corrector functions. (NS)

Providing and installing split type air conditioners fIVE star rating inverter type with copper coil 2.0 ton capacity +/-10% fitted with super tropical - DC PAM inverter - return cooled - rotary compressor operating on referigerant R-32/R-410A suitable for wall mounting confirming to IS : 1391 ( Part - 2 ) / 92 ( Execpt power consumption norms with upto date amendments suitable for operating on 230 volts 50Hz single phase A.C supply having following specifications :- i) Cooling Coil row - 3 Nos. ii) Air Flow ( CMH ) - 1100-1400 cum / hr iii) Sound Level ( H/M/L ) - 45/38/26 iv) Louvers Swing - 3D+3D Auto etc. complete in all respect. Make O General / Trane/York/ Mitsubishi Heavy Industries Five Star Rating Model as approved by the Engineer in Charge. (NS)

Providing and fixing extra copper tubing / referigerant pipe for above split air conditioners consisting of inlet , outlet pipes , insulation and electricwiring etc as per requirement complete in all respect beyond 4.0 meters length (NS)

Providing and installation of automatic voltage stablizer of Single Phase 5.00KVA capacity copper wound heavy duty 100volt up of Logicstate/Voltstar/Bluestar/V -guard make ISI marked complete in all respect. (NS)

Providing and fixing in position powder coated MS stand for outdoor units of air conditioners including suitable nuts & bolts etc. of best quality complete in all respect. (NS)

S/E of Underground cable in 1 mtr below ground level with sand & 2nd class Bricks complete with necessary connections :-95sqmm 3.5 core Al. Ar. Cable. (NS)

S/E of underground cable loose in existing pipe or trenches complete with necessary connectons :- 25sqmm 4 Core Cable (NS)

95sqmm 3.5 core Al. Ar. Cable (NS)

S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.Cable Size 1.5 sqmm (3/0.81) (NS)

Cable Size 4 sqmm (7/0.85) (NS)

Cable Size 10 sqmm (7/1.35) (NS)

SITC of wall / free standing floor mounting dust and vermin proof comopartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick Bkt sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted etc. (NS)

S/Fixing of copper bus bar duly tinned by means of SMC DMC type insulator high tensil nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape etc.(NS)

S/E of heavy duty 4 pole on load changeover load breaker switch comprising of switches 63 Amp to 400 Amp suitable for operation on 415V 50 Hz AC supply complete with handle assembly i/c making necessary connection with petty material req. To complete the job. 300 Amp 4 pole on Load changeover switch Make HPL/L&T (NS)

Pdg. And fixing digital metering equipment for LT cubical panel consisting of 96mmx96mm 0-500 V with s/switch , Amp with s/switch and required CTs 3 Nos. a set of 3 No phase indication lamp R, Y, B Led i/c making necessary connection with petty material req. To complete the job. (NS)

Supply Installation testing & commissioning of 24 Port POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications :Switch should offer Wire-Speed and Non-Blocking Switching with 24 10/100/1000 RJ45 PoE/PoE+ Ethernet ports and additional 4 SFP+ (1G/10G ) fiber based ports, Minimum 2 port . Access Switches should support non-blocking switching fabric capacity of minimum 88 Gbps and minimum line-rate forwarding capacity of 57 Mpps. Access switch should support minimum 16K MAC addresses and minimum 4K active VLANs. Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack from day one. Access switch should support up to 8 hardware queues per port Access Switch should support full Layer 2 features like STP, RSTP, LACP, ACL, QoS, IGMP v1/v2 from day 1.Access Switch should support basic L3 features like IPv4 & IPv6 static routing, Layer 3/4 ACLs, ECMP, virtual interfaces and routed interfaces from day 1. Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade. Access Switch should support minimum 1K IPv4 routes. The Access Switch should support IPv6 management features like IPv6 ping, IPv6 trace route, IPv6 Telnet, IPv6 TACACS, IPv6 and IPv6 RADIUS. All Switches and Transceivers should be of same OEM make.Access switch should support minimum 4K ACL rules ACL per Switch. Access switch should support SNMP v1/v2/v3, SSH, NTP and web management Access switch should have 1G of RAM and 2G of Flash Memory. MAKE : RUCKUS/CISCO/HP (NS)

Supply Installation testing & commissioning of 10GBASE-SR,SFPP MMF LC CONNECTOR with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : BROCADE/CISCO/HP (NS)

Supply Installation testing & commissioning of Cat6 UTP Cable including cost of petty material required to complete the work upto the entire satisfaction of Engineer. MAKE : DLINK/AMP/Molex/belden (NS)

Supply Installation testing & commissioning of 1 Port British Style Shuttered Faceplate (3*3) including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden (NS)

Supply Installation testing & commissioning of SL Series Category 6 Modular Jacks, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden (NS)

Supply Installation testing & commissioning of Category 6 Patch Cord 7feet, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden (NS)

Supply Installation testing & commissioning of 24Port Unloaded Straight Jack pannel, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden (NS)

Supply Installation testing & commissioning of Horizontal PVC Cable Manager - 1U , including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden (NS)

Supply Installation testing & commissioning of 12U Wall Mount rack with front glass door lockable, Fans 90 Cfm 230 Vac, PDU Horizontal 5Amp with 6 Schokets, Cantilever Tray-1U, Horizontal PVC Cable Manager and Hardware front panel Mtg. including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/NETRACK/VPRO (NS)

Supply Installation testing & commissioning of AP Management License with 3 years comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : RUCKUS/CISCO/ARUBA (NS)

Supply Installation testing & commissioning of 4MP IP Network Dome Camera with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : Image Sensor : 1/3” 4 Megapixel Progressive scan CMOS sensor or better Effective Pixels : 2688(H)x1520(V)) or better Electronic Shutter : Auto/Manual, 1/3(4)~1/100000s Scanning System : ProgressiveMini. Illumination : 0.08Lux/F2.0(Color); 0Lux (IR on) S/N Ratio : More than 50dB Min. IR LEDs Length ≥50mIR Leds : 1 Day/Night : Auto(ICR) / Color / B/WBack Light Compensation : BLC / HLC / WDR(120DB) White Balance : Auto/Natural/Street Lamp/Outdoor/Manual Motion Detection : Off/On (4Zone, rectangle) Focal Length : 2.8mm Region of Interest : off/on(4Zone) Angle of View : H: 104° ,V: 57°Video Compression : H.265+/ H.265 Resolution : 4MP (2688x1520)/3MP(2304x1296)/ 2MP(1920× 1080)/720P(1280× 720) Frame Rate (3 Stream) : Main stream (4MP (1 ~ 25/30fps)) & Sub stream : D1(1 ~ 25/30fps)& Third Stream : 720P (1 ~ 25/10fps) Digital Zoom : 16x Bit Rate : H.265: 14 ~ 9984Kbps Network Ethernet : RJ-45 (10/100Base-T) Flip : 0°/90°/180°/270° Protocol : HTTP; HTTPs; TCP; ARP; RTSP; RTP; UDP; SMTP; FTP; DHCP; DNS; DDNS; PPPOE; IPv4/v6; QoS; UPnP;NTP; Bonjour; 802.1x; Multicast; ICMP; IGMP; SNMPCompatibility : ONVIF SD Card : Min 128GB SD card supportPower Supply : DC12V, PoE (802.3af) Working Environment : -30°C~+60°C / Less than 95%RH (no condensation) Ingress Protection : IP67 Audio Interface : Built-in-MicIntelligence (IVS) : Tripwire, Intrusion, Object Abandoned/Missing ,Advanced Intelligent Functions : Face DetectionCertification : CE, FCC,UL alongwith test report of the productMAKE : DAHUA/PANASONIC/HONEYWELL/HYUNDAI (NS)

Supply Installation testing & commissioning of Video Management Server with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications :MAKE : DAHUA/PANASONIC/HONEYWELL/HYUNDAI (NS)

Supply Installation testing & commissioning of outdor 4*4 box with the 3 years free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : STRONGER/MOLEX/AMP) (NS)

Supply Installation testing & commissioning of 6TB surveillance hard disk with the 3 years free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : WD-PURPLE/SEGATE (NS)

VARIABLE REFRIGERANT Volume/ FLOW SYSTEM (With Heat Pump)Supply, installation, testing and commissioning of aircooled variable refrigerant flow modular type airconditioning system with R410a refrigerant suitable for 415±10%, 50 cycles.The unit shall consist of indoor and out door units with individual controller as per detail given in specifications and having following items : (These items are to be given in Indian rupees with custom duites, inland frt,clearance etc on Site basis)Modular type outdoor units equipped with highly efficient inverter type scroll compressors with special precoated heat exchanger, low noise condenser fan housed in compact housing duly powder coated and Outdoor unit having COP at 100% load to be minimum 3.4 to 3.5. of following capacitites: Cost of R 410 A Gas should be inclusiveThe outdoor unit should include all loading, unloading, transportation, power cabling/wiring from near the indoor and outdoor units respectively.Outdoor Units-Heat Pump , Fully Gas Charged York , Gree , O generalVRV : 18 HP ODU Make O General / Mitshubhshi Heavy /Trane/York (NS)

Ductable Type indoor unit - VRVSupply, installation, testing and commissioning of ducable type indoor unit with cordless remote controller.Fully Factory assembled,wired and tested Indoor Units as per specifications ans as required to make the system complete.Ductable Units 2530 CFM /7.5 TR Make O General / Mitshubhshi Heavy / Gree (NS)

Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with ( 19/13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with hangers. including Y joints / headers Make Mandev, Totaline, Mexflow, Parasmani. 28.6 mm OD (NS)

22.2 mm OD (NS)

15.9 mm OD (NS)

12.7 mm OD (NS)

Supply, installation, testing, termination and commissioning of control cum transimission wiring (should be shielded cable in PVC Pipe) of 2C x 1.5 Sqmm Cu between indoor unit and out door unit and indoor units and its remote controller.National, Belton Cable, KEI , Polycab (NS)

Providing and fixing and in position the following PVC pipes for condensate drain duly insulated with kinny foam & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the indoor units upto the main header in the shaft dor vertical risers)Supreme, Polypack, Polycab i) 32 mm dia (NS)

Air Distribution Site Fabricated DuctSupply,Fabrication , Installation and testing of sheet metal ducts in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 0.63mm (24 gauge) GSS (NS)

Supplying, installing, testing and balancing of aluminium supply/return air grills of various sizes. Each grill shall be with fixed horizontal front bar at Zero/15 Deg deflection through the collar and register.i) Aluminium Return air 2- Slot Diffuser without damper.and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS)

Supplying, installing, testing and balancing of Al. Volume control dampers for Slot Diffusers & supply air collar of Linear Grille and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS)

MECHANICAL INSULATION DUCT LINE ACOUSTIC TREATMENT 'Supply and Application of acoustic lining within the supply air duct Fiber Glass wool of 32kg./m³ density). as per specifications and drawings.i) 25mm thick (For Duct) (NS)

SITC of Thermal insulation material for Duct insulation shall be closed cell cross linked polyethylene foam. Thermal conductivity of the insulation material shall not exceed 0.032 W/moK at an average temperature of 25oC. Density of the material shall be 25-30 Kg/m3. The product shall have temperature range of –40 oC to 105oC. The insulation material shall be fire rated for Class 1 as per BS 476 Part 6: 1989 for fire propagation test and as per BS 476 Part 7, 1987 for surface spread of flame test. Water vapour permeability as per DIN 52615 shall not exceed 0.15ng/Pa.Sec.m. i) 9 MM Thick (NS)

OUTGOINGS PANELSupplying, installing, testing and63A, TPN ELCB with 18KA breaking capacity and cost of petty material required to complete the work upto the entire satisfaction of Engineer In ChargeODU Panel Described as above/As per Manufacturer ODU Configuration. (NS)

Supply, installation, testing & commisioning of LPCB approved mineral insulated copper conductor cables, construction as per BSEN 60702-1:2002 suitable for withstanding 950 deg under fire conditions as per BS 6387 CWZ and 850 deg under fire conditions on one single sample as per BSEN 50200. Cable should be manufactured with seamless copper tube and should be HFLS sheathed. (Tagging to be provided with aluminium strips on both the ends as approved).i) 4Cx10 Sqmm (NS)

Supply, installation, testing & commisioning of LPCB approved mineral insulated copper conductor cables, construction as per BSEN 60702-1:2002 suitable for withstanding 950 deg under fire conditions as per BS 6387 CWZ and 850 deg under fire conditions on one single sample as per BSEN 50200. Cable should be manufactured with seamless copper tube and should be HFLS sheathed. (Tagging to be provided with aluminium strips on both the ends as approved).i)4Cx16 Sqmm (NS)

Supplying and installing following size of perforated G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders including G.I. bolts & nuts, painting of suspenders etc. complete as required.i) 300 mm. Width x 50mm. Depth x 1.6mm. Thickness. (NS)

Providing and fixing following size of G.I. strip / G.I. wire on surface or in recess for loop earthing alongwith the existing surface/ recessed conduit/ submain wiring / on cable tray/ on surface including G.I. clamps etc. complete as required.i) 6 SWG G.I. wire (NS)

Supplying and installing following size of MS ODU Stand and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge (NS)

Supplying and installing following size of MS IDU Stand Cat Walk for Maintinance and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge (NS)

SITC of Motorized DMX operated Main Curtain 9 Mtrs straight, Centre partting as per design.This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM ABB/Kirloskar/CG, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) ABB/Kirloskar/CG: 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree.The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaftMade up of I Track for complete lengthCurtain holding trollies with ball earing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Aultra Lighting / Leksa Lighting / Markrich (NS)

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:9Mtr x 5 Mtr. Make: Om Phile / Nexgen / Comrade (NS)

SITC of Motorized DMX operated Rear Curtain 9 Mtrs straight, Centre partting as per design.This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM ABB/Kirloskar/CG, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP)ABB/Kirloskar/CG : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Motor Cable termination box Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Aultra Lighting / Leksa Lighting / Markrich (NS)

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 9Mtr x 5Mtr.The quality & color of the Fabric will be approved by EIC. Make: Om Phile / Nexgen / Comrade (NS)

SITC of On Stage Fixed Frill Bar 8 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Aultra Lighting / Leksa Lighting / Markrich (NS)

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 8Mtr x 1Mtr. Make: Om Phile / Nexgen / Comrade (NS)

SITC of Fixed Wing Structure designed as per site condition for a height approx 5 Mtr x 1.5Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. Make: Aultra Lighting / Leksa Lighting / Markrich (NS)

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 5Mtr x 1.5Mtr Make: Om Phile / Nexgen / Comrade (NS)

SITC of Fixed on stage Lighting bar/winch of 8Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner.Made out of 48mm Outer Dai, 40 Nominal BoreMaterial for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition.Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Make: Leksa Lighting / Markrich / Aultra Lighting (NS)

SITC of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm,Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site conditions Make: Leksa Lighting / Markrich / Aultra Lighting (NS)

SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effectsRigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Markrich / Aultra Lighting (NS)

SITC of 750W profile Light (36Degree) : Luminaire provided with gel holder, Gobo holding. Specification: Die cast Aluminium body, with HPL lamp. To include mounting accessories with required lamp. Make: Leksa Lighting / Markrich / Aultra Lighting (NS)

SITC of Digital Lighting Console with 1024 DMX channels, 1024 Channels. 10 Programmable Executors Master Fader, Keypad entry, LCD Display, Encoder Wheels Time control of scenes: Fade in/out, LTP slope Channels for each fixture 40 primary + 40 fine tuneSwitchable Page Scenes/Playbacks 10 Scenes to run simultaneoulsy 600 Scene stepShape generators: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus, Master slider - Global, playback, fixture USB Memory - FAT32 supported Make: Lite Puter/ Leksa Lighting/ Avolite (NS)

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal. Make: Falcon / Belden / Guru Astronics (NS)

Light pointSITC of Light Point Wiring from Distribution Board to be provided near stage to various stage light fixtures with 2.5 Sq.mm 3 Core PVC Insulated and PVC Sheathed Cable (ISI Mark) including PVC conduit of suitable size for laying these wires on the conduit including 16 / 6 amp sockets with box and top etc complete as required.Make: Polycab / Walna / SBEE (NS)

SITC of Power Distribution Electrical panel having a Individual MCB control for 6 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivery connectors for the internal terminations and external outgoing connecting points, Fibre / brass glands of suitable size fitted MCB control for outgoing circuits.Custom built as per specification and project requirement. Make: Seimens / Leksa Lighting / L&T (NS)

LED Flood Light 200W - Power Input : AC 220-240V, 50 Hz, Light Source : LED, Wattage : 200W, LED should run with 10 -20% lower current by considering maximum efficiency, System Efficacy : ≥135 lm/W, IP rating : IP 65/66, IK rating : IK 07, CCT : ≥5700 K, CRI : ≥ 70, Driver : Integral, Constant Current : THD : ≤ 10 %, Power Factor : ≥ 0.90, Operating Frequency : 50 Hz, Surge : 4 kV & External up to 10kV, Operating temperature range : 0° C TO 50° C, Body : Die Casted Aluminium, Cable : 3 core 1.5sq mm, Control : ON/OFF, Mounting System : Bracket with holes for nut & bolting, Glass: Heat resistant toughened glass, Secondary lenses are used, Paint: Powder coated (Approved colour coat), Max. Dimensions: 407 x 317 x 250mm (+/-2 to5%), Weight: 7.0Kg (+/-2 to5%) Make: Leksa Lighting / Markrich / Aultra Lighting (NS)

SITC of Dimmer Pack Rackmount having 6 nos of Channels Low Noise – Active Cooling system Inbuilt Thermal Sensors 50 ~ 100% Overload protection Each Channel control for Dimming / Switch Mode Channel Control Wattage from 2500W ~ 5000W Individual MCB Protection for each channel 10A/20A Internal Temperature monitoring & Safety device Sleek and Unique Designed Light body Flash Toggle Switches on each channel High quality power Ivory interface Address Setting through Press Switches Approved Make: Lite Puter/ Leksa Lighting (NS)

Supply, Installation, Testing and Commissioning of twelve-inch, two-way speaker system designed for either main sound reinforcement.90° x 50° coverage for even and smooth response on and off axisFrequency Range (-10 dB) 50 Hz – 20 kHz Coverage Pattern 90° x 50° nominal Maximum SPL (1m) 126 dB SPL peak, Nominal Impedance 8 ohms Suspension / Mounting: Dual angle, 0° or -10° 35 mm pole socket, Twelve M10 Suspension Points, Transport: Glass-filled handle with rubber grip Finish: Black DuraFlex™ finish, Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent black screen backing. PRXseries, Input Connectors: Parallel Neutrik® Speakon® NL-2 / ¼" phone combo jacks etc. complete with installation as per the site requirement. MakeL-Acoustics/JBL/Bose/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of an eighteen inch subwoofer which, when combined with the two-way models, provides a sub/sat system capable of generating 135 dB of full-range, high quality audio.system capable of generating 135 dB of full-range, high quality audio. System Sensitivity 95 dB SPL (1w@1m) Power Rating, Pink Noise 800 W / 1600 W / 3200 W(Continuous/Program/Peak) Maximum SPL (1m) 130 dB SPL peak Nominal Impedance 8 ohms etc. complete with installation as per the site requirement. Make L-Acoustics/JBL/Bose/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of twelve-inch, two-way speaker system designed for either main sound reinforcement.90° x 50° coverage for even and smooth response on and off axisFrequency Range (-10 dB) 50 Hz – 20 kHz Coverage Pattern 90° x 50° nominal Maximum SPL (1m) 126 dB SPL peak Nominal Impedance 8 ohms Suspension / Mounting: Dual angle, 0° or -10° 35 mm pole socket, Twelve M10 Suspension Points, Transport: Glass-filled handle with rubber grip Finish: Black DuraFlex™ finish, Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent black screen backing. PRXseries Input Connectors: Parallel Neutrik® Speakon® NL-2 / ¼" phone combo jacks etc. complete with installation as per the site requirement. MakeL-Acoustics/JBL/Bose/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of Ultra Compact 2-way Loudspeaker with 1 x 6.5” LF 1” Exit Compression Driver with 90° x 90° Coverage PT™ Waveguide 165 mm (6.5 in) LF transducer Ultra compact enclosure 320W Program, Dual Neutrik NL4 connectors plus screw terminal FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality Frequency Response (-10dB) 55 Hz -20 kHz Frequency Response (±3 dB) 65 Hz -18 kHz, System Power Rating 250 W (AES rated), 160 W / 320 W / 640 W (Continuous/Program/Peak) (IEC rated), Nominal Impedance 16 Ohms Maximum SPL (1m) 110 dB System Sensitivity (1w @ 1m) 90 dB SPL etc. complete with installation as per the site requirement. Make L-Acoustics/JBL/Bose/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of High-Performance 22-input small format analogue mixers with onboard effects Iconic Soundcraft® Ghost mic preamps with ultra-low noise performance Renowned Soundcraft® Sapphyre British EQ with sweepable mid-bands per channel Lexicon® Effects Engine featuring award-winning Reverbs, Delays, Choruses and Modulations, dbx® Limiters (High-ratio Compressors) on input channels, 2-in/2-out USB audio playback and recording*, Switchable Hi-Z inputs for guitars, basses and other instruments, Hi-Pass Filters (low-cut) and 48V Phantom Power on all mic channels, Comprehensive Soundcraft® GB Series audio routing smooth premium-quality faders, Robust metal construction for tour-grade build quality and reliability, Internal universal power Supply, Installation, Testing and Commissioning etc. complete with installation as per the site requirement. Make L-acoutics/BOSE/Soundcraft/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power Supply, Installation, Testing and Commissioning temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software, Increased number of presets to a total of 50; 49 of which are user definable two Channel 2100W Amplifier Channels 2, Sensitivity 1.4V Rated Power Output (per channel) 3000W 2Ω, 2100W 4Ω, 1200W 8Ω, Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted), THD < 0.5%, Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB, Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB etc. complete with installation as per the site requirement.MakeBose/L Acoustics/Crown/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power Supply, Installation, Testing and Commissioning temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable two Channel 2100W Amplifier Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 3000W 2Ω, 2100W 4Ω, 1200W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted), THD < 0.5%, Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB, Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB etc. complete with installation as per the site requirement. Make Bose/L Acoustics/Crown/Bosch (E.V.) (NS)

Supply, Installation, Testing and Commissioning of Digital Signal Processor ontains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device. Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path. 12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. 12 Analog Inputs (with 48v Phantom Power per Channel), 8 Analog Outputs configurable Signal Processing, 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation, Rich Palette of Processing and Logic Objects 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus Clear Front Panel LED Indication Bi-Directional Locate Functionality 12 Control Inputs and 6 Logic Outputs for GPIO Integration, Soundweb London Interface Kit for Third Party Control System Integration (Documentation), HiQnet Device, Configuration, Control and Monitoring from HiQnet Audio Architect etc. complete with installation as per the site requirement. MakeBose/ClearOne/ Biamp. (NS)

Supply, Installation, Testing and Commissioning of Wired Vocal Microphone with On/Off switch, Transducer type: Dynamic, Polar pattern: Hypercardioid, Frequency response: 25 - 18,000 Hz, Open circuit voltage : 3.2 mV/Pa (-50 dBV) ±2.5 dB, Nominal impedance 280 Ω, Connection: XLR, 3-pin, male, etc. complete with installation as per the site requirement.Make Beyerdynamic/ Shure/ Sennheiser (NS)

Supply & Erection of Dynamic microphone (cardioid) for instruments complete in all respect Make Beyerdynamic/ Shure/ Sennheiser (NS)

Supply, Installation, Testing and Commissioning of wireless handheld microphone with (UHF) Diversity receiver ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Cardioid , Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter , Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40 Mhz Or better etc. complete with installation as per the site requirement.MakeBeyerdynamic/ Shure/ Sennheiser (NS)

Supply, Installation, Testing and Commissioning of 12000 ANSI Lumens 3LCD Projector with suitable lens, Display area: 1” x 3 BrightEra LCD Panel, Aspect ratio: 16:10, Number of Pixels6,912,000 (1920 x 1200 x 3) pixels, Aspect Ratio16:10, ResolutionWUXGA (1920 x 1200 pixels), Laser diode, Contrast Ratio (full white / full black) : ∞ : 1, Colour SpacesRGB 100% (Picture mode: sRGB), Power RequirementsAC 100 V to 240 V, 10.8 A to 4.4 A, 50 Hz / 60 Hz, inputs/outputs: RGB / Y PB PR input connector: 5 BNC (female), Mini D-sub 15-pin (female), DVI-D 24-pin (single link), HDCP support HDCP: v1.4, HDMI 19-pin, HDCP support HDCP: v1.4, RJ45, 3 play, Optional adaptor slot for 3G-SDI Input Adaptor (BKM-PJ20), HTML Viewer, OUTPUT :1Monitor output for Input A/Input B Connector: Mini D-sub 15-pin (female), USBType-A x 1 etc. complete with installation as per the site requirement.Make Sony/ Christe/ Barco (NS)

Supply, Installation, Testing and Commissioning, I of Motorized projection screen 220” Diagional (4:3), 12X16 etc. complete with installation as per the site requirement. Make Suvira/Da-lite/Draper (NS)

Supply, Installation, Testing and Commissioning of Mixer: Min 16 Mic/line Preamps input or better; 4 Subgroup outputs or better, Min 4 Aux or better and Mixer has inbuilt effets & Reverb feature; 9band stereo graphic EQ along with other accessories and provisions etc. complete with installation as per the site requirement.Make Yamaha / Soundcraft / Allen & Heath (NS)

Supply, Installation, Testing and Commissioning of Custom Mic Box 4 point etc. complete as per site requirement.Make Custom (NS)

Supply, Installation, Testing and Commissioning of customizes Bracket for FOH, Delayed speakers etc. complete as per site requirement. Make Custom (NS)

Supply, Installation, Testing and Commissioning of Long mic stand etc. complete as per site requirement. Make Ahuja/Beyerdynamic/K&M (NS)

Supply, Installation, Testing and Commissioning of Small mic stand etc. complete as per site requirement. Make Ahuja/Beyerdynamic/K&M (NS)

Supply, Installation, Testing and Commissioning 42 U Equipment Rack with cooler mic , PDU sockets etc. with complete accessories etc. complete as per site requirement. Make MTS /Valrack (NS)

Supply, Installation, Testing and Commissioning of microphone cable 1.5sq mm, 24/22 AWG etc. complete as per site requirement. Make Krystal/Extron/Kramer (NS)

Supply, Installation, Testing and Commissioning of DMX multi channel Snake cable Series – 24 AWG x 2 core snake cable 8 pair ABC copper conductor PE insulated , core twisted in circular form , insulated with Mylar tape , spiral shield (93%) With ABC copper, outer jacketed with matt finish high flex special PVC . etc. as per site requirement.Make Krystal/Stacker/Kramer (NS)

Supply, Installation, Testing and Commissioning of Vasiform installation speaker cable Series – 2.50 Sq mm x 2 core cable ATC copper conductor PVC insulated , core twisted in circular form , outer jacketed with vasiform sheathed special PVC etc. complete as per site requirement.Make Krystal/Extron/Kramer (NS)

Supply, Installation, Testing and Commissioning, installation, testing & commissioning of audio & video male -female connectors etc complete as required as per site requirement.Make Neutric/Extron/Kramer (NS)

Supply, Installation, Testing and Commissioning of LED TV: Size 48'' 4K as per latest specification with suitable size Iron stand for mounting of LED TV on ground/stage corner including the cost of all petty material required material to complete the job in all respect. Make Panasonic / Sony / Samsung (NS)

AV Science And Technologies Pvt Ltd

Sham Lal Contractor