Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.8 L
Closing Date
31 Jul 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
17 conditions · 4 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where, V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value up to Rs. 50 lakhs. For tenders costing more than Rs. 20 crore, eligibility criteria include bid capacity also as specified in Clause 10.3 of IRSGCC April 2022-PART-I, "Regulations for Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed in Proforma 2 of Proforma set. The tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender
In support of Financial Eligibility Criteria: The tenderers shall submit requisite information as per Annexure-VIB, vide para 10.2, Part I of GCC 2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs as per clause 10.1(a) of IRGCC-2022 (part-1): (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender. The technical eligibility for the work as per para 10.1 above, shall be satisfied by either the JV in its own name & style' or 'Lead member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for the work as per para 10.1 above, shall have technical capacity of minimum 10% of the cost of work i.e., each non-lead member of JV member must have satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which the tender is invited, one similar single work for a minimum of 10% of advertised value of the tender. B) Technical eligibility for composite tender: 1. Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3. In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. The technical eligibility for major component of work as per para 10.1 above, shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV' and technical eligibility for other components of work as per para 10.1 above, shall be satisfied by either the 'JV in its own style' or 'any member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for any component of the work as per para 10.1 above, shall have technical capacity of minimum 10% of cost of any component of work mentioned in technical eligibility criteria. i.e., each other (non-lead) member must have satisfactorily completed or substantially completed during the last 07 (Seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum of 10% of cost of any component of work mentioned in technical eligibility criteria. Note: a) The Major component of work for this purpose shall be the component of work having highest value. In cases where value of two or more component of work is same, any one work can be classified as Major component of work. b) Value of completed work done by a member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above-mentioned technical eligibility criteria in the tender under consideration.
A) If the Tenderer proposes to subcontract any component/components as per item 4 above, which is less than 50% of tender value, then a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the sub-contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. B) For component less than Rs 2 Cr, technical Eligibility will not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender. C) The contractor will engage an eligible sub- contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022. Note: a) Tenderers may see Explanation for Para 10 of the Tender Form (Second Sheet) including Para 10.1 to 10.5 - Eligibility Criteria of IRSGCC-2022. b) The Experience Certificates are to be attached to the e-offer as per Proforma - 1.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. The work executed by the tenderer for any Govt. /Govt. bodies/PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Building Work or Concrete Work
108 conditions · 2 needing a document upload
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as mentioned in Standard Technical Criteria (as per Pro forma - 1).
Uploading of Scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc. as per Note for clause 10.1 of IRSGCC- April 2022.
Uploading of Scanned copy/copies of proof(s) of Technically Eligibility Criteria as per clause 7 of IRSGCC-2020, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause 10.1 (b)(iii) of IRSGCC- April 2022.
Uploading of Scanned copy of Bid capacity (as per Pro forma - 2.) and in terms of clause 10.3 & 10.5 of IRSGCC-April 2022.
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization.
Uploading of Scanned copy of List of Machinery, Tools & Plants and Staff to be Deployed on this work (as per Pro forma - 3).
Uploading of Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6).
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (as per Pro forma - 7).
Uploading of Required documents in case of Individual OR Proprietary Firm / Concern OR Partnership Firm OR Company OR J o i n t Venture Firm /HUF/Society, etc., as mentioned in Commercial Compliance (whichever is applicable).
Uploading of Test report of ballast (if applicable).
Uploading of Method Statement (if applicable).
Uploading of Proforma (Proforma-9) attached with Tender Document for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores.
Uploading of (Proforma-10 ) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause- 27 of SCC 2025.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India .
Uploading a scanned copy of Registration Certificate by Startup firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full BID Security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority for payment of 50% BID Security.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India .
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii)All other documents in terms of explanatory notes in clause 10 of IRSGCC - April-2022-Part-I. (iii)All other documents as per Clause 14 of IRSGCC - April-2022- Part-1.
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of partnership deed or a copy of partnership deed registered with registar . (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (iv)Other documents as mentioned in terms of para 10 tender form (2nd sheet) of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 and Clause 18 of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v)All other documents in terms of para 10 of tender form (2nd Sheet) of IRSGCC-2022 (vi) All other documents as per Clause 14of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: In case one or more of the members of the JV is/are (A)Partnership firm(s), following documents shall be submitted: (i)A notarized copy of the Partnership Deed or Copy of partnership deed registered with registar , (ii)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (iii)A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (iv) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. In case one or more members is/are (B) HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his concern is a proprietary concern and he is sole proprietor of the concern or he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. In case one or more members of the JV is/are (C)Companies, the following documents shall be submitted: (i)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (ii)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (iii)A copy of Certificate of Incorporation (iv)A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation of LLP(iii) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement.(iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (v) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (E)A copy of Certificate of Registration
i)A copy of Memorandum of Association of Society/Trust Deed A copy of Rules & Regulations of the Society (ii) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust. (F)Other documents as mentioned in terms of para 10 of Tender form(2nd sheet) of IRSGCC-April-2022 Part-I. (G)All other documents as per Clause 14 , 17 & 18 of IRSGCC-April 2022 -Part 1 are to be submitted.
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii)All other documents in terms of Para 10 of Tender form(2nd sheet) of IRS GCC April 2022. (iv) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv). An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (vi) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i)A copy of the Certificate of Registration (ii)A copy of Memorandum of Association of Society / Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Copy of rules and regulations of the society (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (v) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
Any other document required for evaluation of his/ their bid as deemed fit by the tenderer.
Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Request for Mobilization Advance if applicable (as per Proforma- 8).
Proforma-9 for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per Special Conditions of Contract) OR Proforma-10 of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per Special Conditions of Contract)
Uploading of Scanned copy/copies of formal agreement duly executed and notarised by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
The tenderer whether sole proprietor/Company or a partnership firm/JV venture (JV) / Registered Society / Registered Trust/HUF etc., if they want to act through agent or individual(s), should submit along with tender, a copy of Power of attorney duly stamped and authenticated by a notary public or by magistrate in favour of specific persion whether he/they be partner(s) of the firm or any other person agreement, receive money, co-ordinate measurement through contractors authorized engineer, witnessed measurement, sign measurements books, compromise, settle, relinquish any claim(s) preferred by the firm and sign " No Claim Certificate" and refer all or any disputes to arbitiration the above power of attorney shall be submitted even if such specific person is authorized for above purpose through partnership deed/memorandum of understanding/Article of Association or such other document, failing which, tender is liable to be rejected.
Proposed construction of S&T Kavach building in SBC Yard
SBC-GSU-ENGG-2026-03
SBC-GSU-ENGG-2026-03
Open
Works - General
9 Months
Dharwad, Karnataka
₹0
₹4.8 L
31 Jul 2026
9 Jul 2026
17 Jul 2026
111 items across 4 schedules · ₹3,22,01,558.38 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum 2843 | — | 261.35 | 7,43,018.05 |
| 2 | Beyond 5 km upto 10 km per km | cum- 14215 km | — | 18.53 | 2,63,403.95 |
| 3 | All kinds of soil | cum 1800 | — | 177.5 | 3,19,500 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum 1100 | — | 196 | 2,15,600 |
| 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 750 | 700.5 | 5,25,375 |
| 6 | All kinds of soil | cum | 882 | 126.8 | 1,11,837.6 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 150 | 7,294.7 | 10,94,205 |
| 8 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 218 | 18.15 | 3,956.7 |
| 9 | Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. | cum/m depth | 50 | 1,098.8 | 54,940 |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 707 | 392.15 | 2,77,250.05 |
| 11 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 594 | 842.5 | 5,00,445 |
| 12 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 758 | 927.25 | 7,02,855.5 |
| 13 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 439 | 736.4 | 3,23,279.6 |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 354 | 961.3 | 3,40,300.2 |
| 15 | Stairs, (excluding landings) except spiral- staircases | Sqm | 91 | 764.95 | 69,610.45 |
| 16 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 51 | 951.1 | 48,506.1 |
| 17 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | Metre | 132 | 78.4 | 10,348.8 |
| 18 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 140 | 9,504.75 | 13,30,665 |
| 19 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 280 | 9,655.7 | 27,03,596 |
| 20 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 235 | 9,860.4 | 23,17,194 |
| 21 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 66 | 10,011.35 | 6,60,749.1 |
| 22 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 140 | 733.5 | 1,02,690 |
| 23 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm / 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. | cum | 7 | 10,195.45 | 71,368.15 |
| 24 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 150 mm to 300 mm thick with Grade -1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in- Charge. (The payment of RCC band and reinforcement shall be made for separately). | cum | 296 | 8,333.65 | 24,66,760.4 |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 120 | 1,267.95 | 1,52,154 |
| 26 | Second class teak wood | cum | 1.34 | 1,42,949.7 | 1,91,552.6 |
| 27 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 45 | 3,473.85 | 1,56,323.25 |
| 28 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 28 | 462.35 | 12,945.8 |
| 29 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium density grade I, ISI marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | Metre | 48 | 600.55 | 28,826.4 |
| 30 | 20 mm dia (heavy type) | Metre | 48 | 175 | 8,400 |
| 31 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg 1447 | — | 238.35 | 3,44,892.45 |
| 32 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 31 | 228.85 | 7,094.35 |
| 33 | 250x10 mm | Each | 27 | 441.6 | 11,923.2 |
| 34 | 250x16x5 mm | Each | 17 | 308 | 5,236 |
| 35 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 14 | 121.65 | 1,703.1 |
| 36 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 14 | 998.35 | 13,976.9 |
| 37 | 125 mm | Each | 28 | 231.05 | 6,469.4 |
| 38 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 45 | 10,993.55 | 4,94,709.75 |
| 39 | Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 meter) | Sqm | 10 | 8,247.25 | 82,472.5 |
| 40 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 17 | 8,595.15 | 1,46,117.55 |
| 41 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. | Sqm | 443 | 83.85 | 37,145.55 |
| 42 | Light shade pigment using white cement | Sqm | 50 | 1,402 | 70,100 |
| 43 | Acid and alkali resistant tile | Sqm | 40 | 1,738.15 | 69,526 |
| 44 | Acid and alkali resistant tile | Sqm | 33 | 1,884.9 | 62,201.7 |
| 45 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 55 | 1,315.3 | 72,341.5 |
| 46 | Size of Tile 600 x 1200 mm | Sqm | 410 | 1,798.8 | 7,37,508 |
| 47 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 153 | 4,481.3 | 6,85,638.9 |
| 48 | 110 mm diameter | Metre | 420 | 377.4 | 1,58,508 |
| 49 | 110 mm | Each | 48 | 136.15 | 6,535.2 |
| 50 | 110 mm bend | Each | 72 | 150.35 | 10,825.2 |
| 51 | 110 mm Shoe | Each | 48 | 131.85 | 6,328.8 |
| 52 | 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) | Sqm | 286 | 1,520.1 | 4,34,748.6 |
| 53 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 126 | 738.65 | 93,069.9 |
| 54 | 1:4 (1 cement: 4 fine sand) | Sqm | 818 | 347.05 | 2,83,886.9 |
| 55 | 1:4 (1 cement: 4 fine sand) | Sqm 1172 | — | 399.45 | 4,68,155.4 |
| 56 | 1:3 (1 cement : 3 fine sand) | Sqm | 345 | 300.45 | 1,03,655.25 |
| 57 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. | Sqm 2504 | — | 87.1 | 2,18,098.4 |
| 58 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm 1191 | — | 262.7 | 3,12,875.7 |
| 59 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm 1924 | — | 193.7 | 3,72,678.8 |
| 60 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 34 | 176.25 | 5,992.5 |
| 61 | Two or more coats on new work | Sqm | 720 | 155.9 | 1,12,248 |
| 62 | New work | Sqm | 39 | 197.65 | 7,708.35 |
| 63 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. | Sqm | 685 | 338.25 | 2,31,701.25 |
| 64 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. | Each | 12 | 288.1 | 3,457.2 |
| 65 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 24 | 2,434.25 | 58,422 |
| 66 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 2 | 3,551.25 | 7,102.5 |
| 67 | In cement mortar | cum | 17 | 2,060.2 | 35,023.4 |
| 68 | Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). | cum | 95 | 9,823.8 | 9,33,261 |
| 69 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 9 | 8,006.6 | 72,059.4 |
| 70 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 12 | 1,879.2 | 22,550.4 |
| 71 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Each | 6 | 2,784.95 | 16,709.7 |
| 72 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 13 | 1,034.8 | 13,452.4 |
| 73 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 13 | 53.25 | 692.25 |
| 74 | Oval shape 450x350 mm (outer dimensions) | Each | 12 | 1,377.1 | 16,525.2 |
| 75 | 25 mm nominal dia Pipes | Metre | 96 | 401.55 | 38,548.8 |
| 76 | 50 mm nominal dia Pipes | Metre | 72 | 934.15 | 67,258.8 |
| 77 | 20 mm nominal dia Pipes | Metre | 24 | 537.6 | 12,902.4 |
| 78 | 25 mm nominal dia Pipes | Metre | 36 | 627.25 | 22,581 |
| 79 | 50 mm nominal dia Pipes | Metre | 60 | 794.25 | 47,655 |
| 80 | 15 mm nominal bore | Each | 10 | 353.25 | 3,532.5 |
| 81 | 25 mm nominal bore | Each | 5 | 622.4 | 3,112 |
| 82 | 20 mm nominal bore | Each | 6 | 539.95 | 3,239.7 |
| 83 | 50 mm nominal bore | Each | 2 | 1,026.65 | 2,053.3 |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per 14400 Litre | — | 11 | 1,58,400 |
| 85 | 100 mm diameter | Metre | 36 | 443.6 | 15,969.6 |
| 86 | 150 mm diameter | Metre | 60 | 695.8 | 41,748 |
| 87 | 200 mm diameter | Metre | 24 | 970.35 | 23,288.4 |
| 88 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 2 | 12,725 | 25,450 |
| 89 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 2 | 7,591.8 | 15,183.6 |
| 90 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 29 | 530.9 | 15,396.1 |
| 91 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to paid separately) | Sqm | 3 | 5,325.9 | 15,977.7 |
| 92 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 28 | 8,042.3 | 2,25,184.4 |
| 93 | Cement mortar 1:4 (1cement : 4 coarse sand) | cum | 10 | 15,155.6 | 1,51,556 |
| 94 | Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). | Sqm | 70 | 1,525.6 | 1,06,792 |
| 95 | Frame size 45 x 85 mm | Metre | 39 | 926.35 | 36,127.65 |
| 96 | 35 mm thick | Sqm | 12.8 | 5,432.85 | 69,540.48 |
| Schedule total | ₹2,37,64,482.68 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AdditionalSpecialconditions.pdf
ATTACHMENT
annexure-VIB.pdf
ATTACHMENT
SCC-06-2024.pdf
ATTACHMENT
EnggCodeUptoACS61Dt.31.05.23letterof31.05.23.pdf Engineering Code
ATTACHMENT
GCC-2022-ACS7.pdf
ATTACHMENT
ACS-8toGCC2022.pdf
ATTACHMENT
ACS-9toGCC2022.pdf
ATTACHMENT
ACS-10toGCC2022.pdf
ATTACHMENT
StdTenderDocument-Version6.0-GSUpdated.pdf
ATTACHMENT
EnggCodeUptoACS61Dt.31.05.23letterof31.05.23.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .