Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.0 LAccepted-AOC OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹47.2 L+₹1.7 L (3.66%)Rejected-Finance MB 58 JUNGLIGHAT KATHIR MARKETING SERVICE MB 58 JUNGLIGHAT NEAR TCI OFFICE SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹47.7 L+₹2.2 L (4.90%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹48.4 L+₹2.9 L (6.27%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹48.7 L+₹3.1 L (6.91%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
REPAIRS TO SEWAGE LINE, SEPTIC TANK, CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANK AND MISC PETTY REPAIRS WORKS UNDER AGE B/R-II AT GE HADDO, PORT BLAIR
2022_MES_536100_1
8646/GE/H/PB
Open Tender
Civil Works
Item Rate
270 days
GE Haddo Port Blair
Class D Category a(ii)
10 documents required · 10 mandatory
₹500
GE Haddo
₹96,000
Yes
22 Aug 2022
6 Jul 2022
30 Jul 2022
6 Jul 2022
25 Jul 2022
20 Jul 2022
6 Jul 2022 - 12 Jul 2022
Amount
Taking out carefully precast RCC cover slabs of septic tanks, keeping aside, removing scum / sludge including water from inside of septic tank into a closed container and disposing into an earth pit of sufficient size and depth, dug in any type of soil within Defence land located at a distance exceeding 250 metres and not exceeding 500 metres, returning, filling in excavated earth into the pit after disposal of scum / sludge including clearing of bushes, vegetation etc., upto a distance of 2 metres from outer edge around the septic tank and placing back the cover slabs in original position and setting in CM(1:6) after inspection/cleaning etc., complete all as specified and as directed for the following capacities of septic tanks:
10 Users capacity
25 Users capacity
50 users capacity
75 Users capacity
100 Users capacity
200 Users capacity
Removing carefully manhole cover slabs of any size and shape, keeping aside and removing the scum / sludge including any organic or inorganic matter from inside of manholes and disposing to a distance exceeding 250 metres and not exceeding 500 metres and placing back the cover slabs in original position and setting in CM(1:6) after inspection/cleaning etc., for the following size of manholes complete all as specified and as directed. NOTE: New Manhole covers, if provided will be measured and paid separately under relevant items of this BOQ.
Inner size up to 600x450mm & invert depth not exceeding 600mm.
Inner size up to 600x450mm & invert depth exceeding 600mm but not exceeding 900mm.
Inner size up to 600x600 mm & invert depth exceeding 600mm but not exceeding 900mm.
Inner size up to 600x600mm & invert depth not exceeding 600mm.
Inner size up to 750x750mm & invert depth exceeding 600mm but not exceeding 900mm.
Inner size up to 900x1200mm & invert depth exceeding 1200mm.
Taking down grating and cleaning Nahani trap/ Floor trap for cleaning of blockage and refixing grating complete all as specified and as directed
Taking down grating and cleaning Gully Trap for cleaning of blockage and refixing grating complete all as specified and as directed
Clearing out blockage of Water Closet of any description complete all as specified and as directed
Labour only for clearing of air lock in toilets/bath and kitchen excluding fittingscomplete all as specified and as directed
Clearing carefully the blockages in sewage lines of 100 mm bore by rodding in between man holes and flushing with water, if required complete all as specified and as directed. NOTE: Removing and placing back cover slabs of manholes will be measured and paid separetely under relevant items of this BOQ.
Clearing carefully the blockages in sewage lines of 150 mm bore by rodding in between man holes and flushing with water, if required complete all as specified and as directed. NOTE: Removing and placing back cover slabs of manholes will be measured and paid separetely under relevant items of this BOQ.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth, for foundation etc., or for shafts, wells, cess pits, manholes, pier holes etc not exc. 10 Sqm on plan and n.exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over areas not exceeding 1.5m depth and getting out in any type of soil complete all as specified and as directed.
Excavation over areas exceeding 1.5m but not exceeding 3.0m in depth and getting out in any type of soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each as in soils complete all as specified and as directed.
Removing excavated material (soils) to a distance exceeding 50 metres but not exceeding 100 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Demolition and breaking 100mm dia drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed
Demolition and breaking 150mm dia drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed
M&L for plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) bed to drain pipes of 110mm bore dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) bed to drain pipes of 160mm bore dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
S&F 110mm dia Underground PVC drainage pipes (SJ Type) S165/SN8/SDR34 in any length with rubber ring joints laid in trenches all as specified and directed.
S&F 160mm dia Underground PVC drainage pipes (SJ Type) S165/SN8/SDR34 in any length with rubber ring joints laid in trenches all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in any position of any description not otherwiae specifically mentioned for complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface of concrete finished even and smooth without using extra cement complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in mud stops, kerbs, surface channels, benchings and the like complete all as specified and as directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.
M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. NOTE: Reinforcement will be measured and paid separately under relevant items of this BOQ.
M&L for pre-cast reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs chullah hoods, chajjas, water troughs, hangers, shelves and similar articles with plain faces set in CM(1:4) complete all as specified and as directed. NOTE: Reinforcement will be measured and paid separately under relevant items of this BOQ.
M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) for lintels upto 1.5m clear span, Steps, bed plates, kerb and coping including necessary form work all as specified and as directed.
Demolition of PCC block masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry not exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster on brick or stone masonry wall including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.
M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.
SUPPLY ONLY integral water proofing compound.
M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.
Dismantling 75mm / 100mm / 110mm / 150mm / 160mm internal dia cast iron / PVC drain or vent pipe jointed in cement mortar laid in trenches or in any position including bends, branch pieces etc. complete all as specified and as directed.
M&L for PVC (SWR) (type"B") pipes 110mm bore single socketed in any length with rubber ring joints including fittings such as bends, tees, junctions etc., fixed to walls with PVC clamps as per manufacturer's instructions complete all as specified and as directed.
M&L for PVC (SWR) (type"B") pipes 75mm bore single socketed in any length with rubber ring joints including fittings such as bends, tees, junctions etc., fixed to walls with PVC clamps as per manufacturer's instructions complete all as specified and as directed.
M&L for PVC (SWR) bends 110mm bore any radius provided with access door, fixed in repairs complete all as specified and as directed.
M&L for PVC (SWR) bends 75mm bore any radius provided with access door, fixed in repairs complete all as specified and as directed.
M&L for 110mm bore PVC (SWR) junction (single T) equal or unequal, fixed in repairs complete all as specified and as directed.
M&L for 75mm bore PVC (SWR) junction (single T) equal or unequal, fixed in repairs complete all as specified and as directed.
M&L for 110mm bore PVC (SWR) vent cowl, fixed in repairs complete all as specified and as directed.
M&L for 75mm bore PVC (SWR) vent cowl, fixed in repairs complete all as specified and as directed.
M&L for loose filling with broken stone or boulders of gauge 40mm to 80 mm in soakage pits etc., complete all as specified and as directed
M&L for PVC ( SWR ) floor trap 100mm dia with grating including joining with solvent cement, fixed in repairs complete all as specified and as directed.
M&L for vitreous China, wash down water closet pan (pedestal pattern), white, including fixing bolts, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, PVC valveless, syphonic action type, flushing cistern 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32 mm dia, fixed in repairs complete all as specified and as directed.
M&L for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P or S trap including provision of lime concrete bedding with and including PVC valveless, syphonic action type, flushing cistern 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32 mm dia, PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs complete all as specified and as directed.
Removing vegetation/ small plants including uprooting completely lying on walls/roofs/chajjas/near service water tanks/along the soil pipes fixed on walls of buildings and making good to match with existing surface with PCC (1:2:4) type B1 (or) in CM (1:3), area of each patch not exceeding 0.10 Sqm including necessary ladders/ scaffolding etc., complete all as specified and as directed.
Cutting bushes and removal of vegetation inside and along the open drains to a width not more than 1.0 metre on either side of drains and removal of rubbish and disposing to a place where directed complete all as specified and as directed. NOTE: One metre length of drain shall be measured as one unit length.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete
M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for 75mm dia PVC (SWR) floor trap with grating including jointing to waste pipe fixed in solvent cement and making good to floor to match existing tile, fixed in repairs complete all as specified and as directed.
Taking up or down steel tubing and connections for 20mm dia pipe complete all as specified and as directed
M&L for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
M&L for 20mm dia or bore CPVC pipe, with all fittings and fixed to walls and ceilings with necessary clamps or laid in floors and jointing using CPVC solvent complete all as specified and as directed.
Taking up or down steel tubing and connections for 15mm dia pipe complete all as specified and as directed
M&L for 15 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm2 with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
M&L for 15mm dia or bore CPVC pipe, with all fittings and fixed to walls and ceilings with necessary clamps or laid in floors and jointing using CPVC solvent complete all as specified and as directed.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc 10 cm girth in PCC block masonry/RCC complete all as specified and directed.
M&L for PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repairs complete all as specified and as directed.
M&L for PVC rubber washer suitable for low level flushing cistern of 10 Litre capacity, fixed in repairs complete all as specified and as directed.
M&L for syphon valve inside flushing cistern of suitable for any capacity, fixed in repairs complete all as specified and as directed.
M&L for flush handle / knob suitable for low level flushing cistern of 10 Litre capacity, fixed in repairs complete all as specified and as directed.
M&L for mild steel brackets for flushing cistern including removing and refixing the same flushing cistern after fixing of new brackets, fixed in repairs complete all as specified and as directed.
M&L for brass, chromium plated lever for flushing cistern vitreous china, fixed in repairs complete all as specified and as directed.
M&L for flush pipe of polyethelene of low or high density or PVC 32mm dia for flushing cistern, fixed in repairs complete all as specified and as directed.
M&L for vitreous china wash down single piece EWC of size 840x390x720mm with in-built flush tank, soft close seat cover with 'S' or 'P' trap and other connecting items of approved brand and fixing with white cement, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. VGS-WHT-0207BS and ZPS-WHT-1015UF or equivalent in PARRYWARE/ CERA/ KAJARIA/PRAYAG
M&L for vitreous China wash hand basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand, 15mm dia CP pillar tap (fancy type), 32mm dia waste coupling brass chromium plated, 32mm dia PVC waste pipe 90cm long, chain and plug, PVC connections 15mm size with PTMT nuts of length 450mm, screwed down for iron pipe or for unions, fixed in repairs including making good disturbed portion to match with the existing surface complete all as specified and as directed.
M&L for 32mm dia waste coupling, brass, chromium plated for wash hand basin with long screwed shank and fly nut and bedded in red lead cement, fixed in repairs complete all as specified and as directed.
M&L for 40mm dia waste coupling, brass, chromium plated for kitchen sink etc with long screwed shank and fly nut and bedded in red lead cement, fixed in repairs complete all as specified and as directed.
M&L for PVC connection 15 mm size, 450mm long with PTMT nuts, fixed in repairs complete all as specified and as directed.
M&L for PVC connection 15 mm size, 600mm long with PTMT nuts, fixed in repairs complete all as specified and as directed.
M&L for PVC water closet seat and cover, black, closed pattern with flat bottom and mild steel chromium plated / PVC or aluminium hinging device, fixed in repairs complete all as specified and as directed.
M&L for 32mm dia PVC (flexible) waste pipe for wash hand basin, fixed in repairs complete all as specified and as directed.
M&L for 38mm dia PVC (flexible) waste pipe for kitchen sink, fixed in repairs complete all as specified and as directed.
M&L for stop valves 15mm dia or bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.
M&L for stop valves 15mm dia or bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.
M&L for stop valves 15mm dia or bore, concealed type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.
M&L for bib tap, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, fixed in repairs complete all as specified and as directed.
M&L for pillar tap, brass, 15mm dia, chromium plated, fancy type with capstan heads, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as specified and as directed.
Supply and fix in repairs CP angle cock 15mm dia fancy type cast copper alloy, fixed in repairs complete all as specified and as directed. (Make: Jaquar Cat No. CON-053KN) or equivalent in Zoloto / Gem / Prayag
M&L for WHB mixer, 15mm dia, cast copper alloy, chromium plated with central hole for WHB and long shank, fancy type, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-167KNB or equivalent in ZOLOTO/ PRAYAG/ GEM
M&L for Wall mixer 3-in-1 system (Hot & Cold water mixer), 15mm dia, cast copper alloy, chrome plated with provision for both hand shower (telephone shower) and over head shower complete with 115mm long bend pipe, connecting leg & wall flange, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-281KN or equivalent in ZOLOTO/ PRAYAG/ GEM
M&L in repairs Chromium plated wall mixer 3-in-1 System with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe. Make : Jaquar Cat Part No. 7281 or equivalent in Parryware/Zoloto/Gem/Prayag
M&L for hand shower (health faucet) (ABS body), chrome plated brass, 15mm size with 1 metre long flexible tube in chrome finish and wall hook, fixed in repairs complete all as specified and as directed. MAKE: ZIM Cat part No. 1624A or equivalent in ZOLOTO/ GEM/PRAYAG
M&L for CP jet spray, multi purpose, 15 mm size for bath room, fixed in repairs complete all as specified and as directed. MAKE: ZIM Cat part No. 1712 or equivalent in ZOLOTO/ GEM/PRAYAG
M&L for shower rose, brass, chromium plated, with or without swivel joints, any size, including fixing to steel pipe or union, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR/ ZOLOTO/ GEM/ PRAYAG
M&L in repairs 100mm size bore chromium plated shower rose after changing washer, nut etc complete all as specified and directed.
M&L for Indian rubber washer suitable for pillar taps, bib cock, stop cock, etc., fixed in repairs complete all as specified and as directed.
M&L for fibre washer suitable for hot water taps, fixed in repairs complete all as specified and as directed.
M&L for brass spindle suitable for pillar tap, bib tap, stop cock, etc., fixed in repairs complete all as specified and as directed.
S&F kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs complete all as specified and as directed.
S&F kitchen sink without drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, fixed in repairs complete all as specified and as directed.
S&F stainless steel grating cover 100mm dia fixed with white cement, fixed in repairs complete all as specified and as directed.
S&F PVC cabinet mirror of size 622mm x 422mm with front mirror, fixed to wall with screws and rawl plugs, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. 555 or equivalent in PARRYWARE/ JOHNSON
M&L for 50mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floors, surface of concrete finished even and smooth without using extra cement complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for glazed ceramic designed coloures tiles as in vertical surfaces of size 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed including 10mm thick backing coat in CM (1:3) complete all as specified.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in levelling course, sub base and paving complete all as specified and as directed.
S&F in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors, including all necessary accessories as elbow, bend, socket etc as in waste pipes, 40mm dia bore for wash basin, sink and including all fitting etc all as specified and as directed
M&L for glossy finished chequered cement concrete tiles 30cm x 30cm x 25mm thick, made of grey cement and pigments, machine pressed as in flooring, set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block, ruberised glossy finished on top portion of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade, with grey cement and pigments complete all as specified and as directed.
M&L for sand (river sand) filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for PVC connection fibre reinforced, 15 mm dia and 60 cm long with brass check nuts and washers suitable for both hot and cold water, fixed in repairs complete all as specified and as directed.
Kathir Marketing Services
CARTWHEEL CONSTRUCTION
M/s K Moorthi
V KARTHICK
DEEPAK AGENCIES
CHANDER SEKER ENTERPRISE
Bismi Builders & Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .