CERTAIN REPAIR TO DRAIN, PATH, HARDSTANDING AND OTHER MISC WORKS AT INF BDE AREA, MD ACCN AND OTHER AREA AT KHASA AREA OF AGE B/R -I UNDER GE NAMS

Amount

M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks complete all as specified and directed.

Description all as per item ser No 1.00 above but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brick work built in cement mortar etc all as directed.

Description all as per item ser No 3.00 here-in –before but except brick.

M&L for plain cement concrete (1:3:6) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete including demoliton of PCC complete all as specified and directed.

M & L for Flush pointing to brick walls in cement mortar 1:4 complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes or drain etc) and similar work including necessary form work and set in CM 1:6 incl dimolition of old slab complete all as specified and directed.

Mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed

M&L for 200mm bore dia RCC Class NP 2 pipes laid and jointed with collar Demolition and breaking up drain pipes (Salt glazed stoneware, AC or RCC) set in cement mortar complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including forming packing under and hunching against the sides of pipe after they are laid and tested for 200mm bore of pipe complete all as specified and directed.

S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed.

Description all as per item ser No 11.00 - here in before but except paver block shall be reused after necessary cleaning and making good all as specified.

M&L for cement concrete chequered tiles 300x300x25 mm thick with cement and coloured pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors over 15mm thick screed bed to floor finishes in cm 1:6 iincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone incl rounded chamfered edge and set in CM 1:4 including demolition of old PCC kerb stone of any description complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete, Type D2 1:4:8 (using 40 mm graded stone aggregate) including demolition of old cement concrete in any description complete all as spd and directed.

M & L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as Spd & directed .

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade B complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) complete all as specified and directed

M&L for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars cornces etc complete all as specified and directed.

M&L for preparation for New concrete ,brick curve stone , asbestos cement for Surfaces and applying two coats of synthetic enamel paint with over a coat of primer any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for preparation for old concrete ,brick curve stone , asbestos cement for Surfaces and applying one coat of synthetic enamel paint any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

S&F precast PCC square pole in repair of M-15 Grade of size 150 mm x 150 mm at bottom & 100 mm x 100 mm at top of 2.25 m height with square base of size 45cm x45cm x15cm and at top pentagonal shaped PCC jali cover all around on square base of size 200 mm x 200 mm x 7.5 mm made as per shape complete all as specified and directed.

S & F steel work in tubular trusses and tubular posts, vertical/horizontal bar, chin up bar and similar works including special shaped washers, chequered plate etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old mild steel of any description complete all as specified and directed.

Description all as per item ser No 25.00 here-in –before but except mild steel.

S&F for Pre- painted galvaume aluminum zinc coating GI based manglore/trapezoidal/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding, fixed with self tapping screws as incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC. Note- Design/Pattern/colour of roofing sheet sheet to decided and approved by EIC/GE.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge hipe valley to wall, fixed with self tapping screws as specifie

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 35 mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed.

M&L, in repair for precast RCC pillar in 1:2:4 type B0 (using 12.5mm graded aggregate) decorative type of size (100mmx100mm & 750mm high for RCC jalli incl fixing in conc etc incl dismantling existing pillar complete all as spd and directed.

S&F, in repair, for 5 mm thick ACP Aluminium composite pannel board prelaminated one sides with decorative choice laminations and fixed with screws to aluminium frame including aluminium of size pipe 40mmx25mm and 1.5mm thick best quality work complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B2, using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for marble or any shade shade of thickness 18-20 mm thick in slab laid over 15mm thick screed bed in cement mortar 1:6 as in floor, steps, riser & treads and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises and rounding to edges of stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge.. etc complete all as specified and directed. Note-size of slab will be decided by Engr-in-Charge.

M&L for Granite 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edging incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for heavy duty, exterior grade (Durastone of Somany/Endura of Jhonson or equivalent as approved by GE) of any size 10mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

Roop Sons and Co (BID ID -3135523)

M/s Vijay Construction Co. (BID ID -3135299)

Chander Mohan Arora Contractor (BID ID -3135352)

M/s MAHAJAN CONSTRUCTION CO. (BID ID -3135106)

tarlok singh contractor (BID ID -3134604)

Santokh Singh and Associates (BID ID -3135264)

M/S MAHAJAN CONSTRUCTION CO (BID ID -3135499)

ss enterprises (BID ID -3135144)

Bharat Builder (BID ID -3135416)