CONSTRUCTION Of BDO OFFICE BUILDING AT narkanda DISTT SHIMLA

Amount

Cutting in Earth work in all kind of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads de-watering and or removal of slush and other incidentals , lift up to any height including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth as directed by the Engineer-in- charge with in all leads , lifts and other incidentals .

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , lift up to any height including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth as directed by the Engineer-in- charge with in all leads , lifts and other incidentals .

Providing form work with steel plates 3.15 mm (three decimal fifteen milimetre ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five mimlimeters )so as to give a fair finish inculding centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removel of same for insitu reinforced concete and plain concrete work in .

Foundation ,footing basis of columns etc. And mass concrete as per direction of the Engineer-in-charge inculding carriage of material with in all leads , lifts in all floor levels and other incidentals.

Flat surfaces, such as soffits of the suspanded floors roofs , landing and the lke floors etc. up to any thickness , all as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals

Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels not exceeding 1 mtr in depth in all heights from floor as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals.

Columns, pillars ,posts and struts squre, rectangular or polygonal in plan as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals

Stair cases with sloping or stepped soffits exculding landing as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals

Form work in edges of slab and breaks in floor and walls under 20cm wide as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals

Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.

Providing and laying, machnically mixed and vibrated cement concrete 1:6:12 (one cement:Six sand Twelve graded crushed stone agregate 40 mm (forty milimeter) nominal size) inculding curing as required at site complete exculding the cost of form work but inculding all leads and lifts of materials in foundation and plinth and asper direction of Engineer -in -charge.

Providing and laying, mechanically mixed and vibrated cement concrete 1:8:16 (one cement:Eight sand Sixteen graded crushed stone aggregate 20 mm (Twenty millimeter) nominal size) and curing complete on slab and floor excluding the cost of form work but including all leads and lifts of materials in screed laid under flooring and as per direction of Engineer -in -charge.

Providing and laying M-20 grade of concrete with minimum cement contents of 400kg (four hundred kilogrames per cum )mechanically mixed and vibrated graded crushed stone aggregate 20mm nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation ,footing basis of columns etc. And mass concrete as per direction of the Engineer-in-charge inculding carriage of material with in all leads , lifts in all floor levels and other incidentals.

Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors , complete as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals.

Staircases ( except spiral stair case) excluding landing but including preparing of top surface and finishing of nosing for all floor complete as per direction of engineer incharge including carriage of material with in all leads lifts in all floor levels and other incidentals.

Columns, pillars ,posts and struts squre, rectangular or polygonal in plan as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals

Providing and laying mechanically mixed and Vibrated cement concrete 1:2:4(one cement :two sand:four graded crushed stone aggregate 20mm nominal size for reinforced concrete chajas not exceeding 10cm thickness up to all floor level including finishing the exposed surface with cement mortar 1:3(one cement:three sand )to give a smooth and even surface ,form work and curing complete excluding the cost of reinforcement but including carriage of material with in all leads ,lifts in all floor levels and other incidentals.

Providing tor steel reinforcement for reinforced concrete work inculding bending and placing in position and cost of binding wire complete for all floors inculding carriage of material with in all leads and lifts and other incidentals .

Randum rubble masonary coursed with hard stone of approved quality in foundation and plinth in cement mortor 1:6 one cement:six sand)

Stone solling under floors inculding carriage of material with in all leads , lifts and other incidentials .

Brick work using second Class common burnt clay building bricks, in cement mortar 1:6(one cement :six sand )in super structure inculding carriage of material with in all leads lifts and other incidentals.

Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:3(one cement :three sand )in super structure up to all floor levels inculding carriage of material with in all leads , lifts and other incidentials .

Providing wood work in frames of doors ,windows ,clerestory, windows and other frames wrought ,framed and fixed in position of second class deodar wood inculding carriage of material with in all leads , lifts and other incidentials .

Providing 40X3mm (forty into three milimeters )flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten milimeter) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30X10X15cm (thirty into ten into fiften centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size)

Providing and fixing 40M thick flush door shutters interior grade comercial type core of blackboard construction with frame of first class hardwood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters

Providing and fiximg 25mm thick commercial board water proof shutters for cup board including fixing with nickle plated plano hinges with screws etc complete including carriage of material within all leads and lifts and other incidental.

Providing and fixing 40mm (forty milimeters )thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, inculding black enamelled iron butt hinges with necessary screws of second class deodar wood inculding carriage of material with in all leads , lifts and other incidentials .

Providing and fixing 40 mm (forty milimeters)thick wire gauge shutters using glavanised M.S. Wire gauge of I.S. Gauge designation 85 (Eighty five ) G. With wire of dia 0.56mm (zero point five six milimeters )for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessery screw of second class deodar wood inculding carriage of material with in all leads , lifts and other incidentials .

Providing and fixing anodised aluminium work for door ,window ,ventilators and partitions with extruded built up standard tabular and other sections of approved make conforming to IS 733 and IS1285 anodised transparent or dyed to required shade according ti IS 1868.(minimum anodic coating of grade AC 15)fixed with rawlplugs and screws or with fixing clips or with expansion hold fastner including necessary filling up of gaps at junction, at top, bottom and sides with required PVC / neoprene felt etc . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically whrer ever required including cleast angle, aluminium ,snap beading for glazinge / panelling CP brass / stainless steel screws. All complete as per Architectural drawings and direction of engineer -in- charge

Providing and fixing glazing aluminium door , window , ventilator shutters and partitions etc with PVC / neoprenes gasket etc. All complete as per Architectural drawings and direction of engineer -in- charge(cost of aluminium snap beading shall be paid in basic items.

Glazing with glass pans of 5.50mm thickness (weight not less then 13.75kg/sqm)

Glazing with glass pan 4.0mm(four millimeters)thick plain glass panes with deodar wood beading complete as per direction of Engineer-in-charge including carriage of material with in all leads , lifts and other incidentals .

Providing and fixing bright finished brass 100mm Mortice latch and lock and a pair of levers, handels with necessary screws etc . Complete (Indian make of approved quality)

Providing and fixing bright finished brass sliding door bolts with bolts and nuts screws etc completes as per direction of engineer -in- charge including carriage of material within all leads and lifts and other incidental.

200x16mm( Two hundred into sixteen millimeters)

300x16mm (three hundred into sixteen millimeter

Providing and fixing bright finished brass tower bolts (barrel type) with the screws etc complete as per direction of the engineer in charge including carriage of material within all leads and shift and other incidentals.

200mmX10 mm (Two hundred millimeters Into ten millimeters)

150 mmX10 mm (One hundred fiftymillimeters Into ten millimeter)

Providing and fixing bright finished brass handels with the necessary screws etc completes within all lead and lifts including carriage of material and other incidental complete in all respect

100 mm (hundred milimeters size)

125mm(One hundred twenty five milimeters size )

Providing and fixing 200mm (Two Hundred milimeters) Bright Finished hard drawn hooks eyes including carriage of material with in all leads and lifts .

Providing and fixing 100mm bright finished brass floor door stopers with rubber cushion screws etc to suit shutters thickness completes including carriage of material and other incidental complete in all respect

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to IS 6315 ) for aluminium door including cost of cutting floor and cover plates etc complete as per direction of Engineer in charge including making the floors

Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material with in all leads lifts in all floors

Providing and fixing in position collapsible steel shutter with vertical channel 20mm x10mmx2mm and braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T iron 40mmx40mmx6mm with 38mm dia steel pulley complete with bolts ans nuts locking arrangement stoppers handles including applying coat of red lead paint including carriage of material with in all leads lifts in all floors

Providing and fixing heavy duty precast cement concrete inter locking paver blocks vibro compacted up tp M 50 grade i/c border or kurb block grey or coloured over sub base of concrete with 25 mm ( twenty five milimeters) thick average thickness of cement mortar 1:4 ( one cement : four sand) laid over and jointed with cement slurry mixed with pigment to match the shade of blocks i/c curing ,rubbing &polishing complete (sub base concrete floor to be paid for

Providing and fixing 10mm(Ten milimeter )thick water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600X600X 10 mm(six hundred into six hundred into ten milimeter )manufactured of approved sade and colour in flooring ,treads of steps and landing laid over 12mm (twelve milimeter)thick cement mortar 1:3 (1ceemt :3 sand ) jointed with ceemt slurry mixed with pigment to match the shade of tiles as required complete including carriage of material with in all leads lifts in all floors

Providing and laying Spartic cermic tiles 5.5MM thick in flooring (300MM.Size) treds of steps laid on a bed of 12 mm thick cement mortar 1:3 (one Cement three Sand ) finished with flush Pointing in white cement including carriage of material with in all leads lifts in all floors

Cement concrete flooring 1:2:4(one cement;two sand:fourgraded stone agg 20mm nominal size laid in one layer finished with a flooting coat of neet cement 40mm thick.

Providing and laying granite stone in flooring 20mm (twenty millimeter average) thick base of cement mortar 1:3(one cement :three sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the granite stone including rubbing and polishing complete (20mm thick) as per design and pattern including carriage of material with in all leads lifts in all floor .

Providing and fixing Galzed tiles of size 450x300mm x 6mm (four hundred fifty x three hundred x six millimeter )thick in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage of material with in all leads lifts in all floors.The sample and pattern of tiles should be got approved from Engineer - in - charge before fixing.

Providing and fixing 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required as per the directon of engineer in charge including carriage of material with in all leads lifts in all floors

Providing and fixing ridges or hips 60 cm over all with 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required as per the directon of engineer in charge including carriage of material with in all leads lifts in all floors

Providing and fixing VALLEY 60 cm over all with 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required as per the directon of engineer in charge including carriage of material with in all leads lifts in all floors

Providing and fixing M.S BP sheet 1.66 mm to 2 mm thick in eaves board / facia / soffit / ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of engineer in charge ( base members of steel work shall be measured and paid separtely including carriage of material with in all leads lifts in all floors

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In

Trusses and trussed purlins in building as per direction of Engineer-in -Charge inculding carraige of material with in all leads and lifts in all floors and other incidentals .

Grating framed guard bars ladders railling brackets and similar works

Providing and fixing on wall face PVC (D-plast) rain water pipes of workng pressure not less than 4.50kg/sqm including filling the joints with approved adhesive complete 100 MM dia pipes

Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (one cement:two sand:four stone aggregated 20mm nominal size )and cost of cutting holes and making good the walls etc.110mmdiameter for C.I pipes

Providing and fixing on wall face PVC (D-plast)accessories for rain water pipes including filling the joints with approved adhesive complete

PVC plain bend 110mm diameter

PVC plain shoes 110mm diameter

Providing and fixing angle iron door, window,clere story windows ,frames manufactured from MS angle iron section of 50x50x6mm thickness including hinges jamb lock jamb beed and if required angle thrashold of mild steel angle50x25mm welded or rigidly fixed by mechanical means lugs with spilt end tails to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangement and shock absorver as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Enginreer in charge.

Providing and fixing 1mm thick MS sheet door shutter with frame of 40mmx40mm x6mm angle iron 3.15mm MS guest plate at junctions and corners ,using MS flat 30mmx6mm for diognal braces and central crossbraces and all necessary fittings including applying a priming coat of red lead paint

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead , red oxide/zinc oxide crome including carriage of material with in all leads, lift and other incidentals.

Painting two coats (excluding priming coat )on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including entire carriage of material with in all lead lifts and other incidentals

Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete including carriage of material with in all leads and lifts.

Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material with in all leads and lifts

Varnishing two coats (excluding priming coat)on new wood and wood based surfaces under coating with flatting,varnishing and finishing coat with varnish to give an even surface including cleaning the surface of all dirt ,dust and sand papering so as to produce a smooth, dry and matt surface including carriage of material with in all leads and lifts

Polishing two coats with french polish on new wood and wood based surface to give an even surface including cleaning the surface of dirt dust and sand papered smooth and including a cost of wood filler

6mm(six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material with In all leads , lifts in all floors and other incidentals completes

15mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand )as per direction of engineer in charge including carriage of material within all leads lifts in all floors and other incidental

Providing and fixing Garsa stone12mm.cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface

Applying one coat of acrylic primer (spectrum or equivalent of superior quality on new concrete /masonry / plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete in all leads lifts carriage of material and other incidentals complete in all respect in all floors.

Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth complete including carriage of material with in all leads and lifts.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick (unconsolidated ) bed of dry brick /stone broken/crushed aggregate 40mm (forty millimeters ) nominal size well rammed & consolidated & grouted with fine sand including preparation of ground as per direction of the Engineer –in-charge including carriage of material with in all leads, & lifts & other incidentals .

Providing plinth protection 50 mm (Fifty Millimeters )thick in cement concrete 1:3:6 (one cement :three sand :six graded/ crushed stone aggregate 20 mm nominal size including finishing the top surface of concrete smooth finfish ,as per direction of the Engineer-in- charge of material with in all leads , lifts & other incidentals’

Brick edging ( brick laid on edge ) to plinth protection with bricks including grouting with cement mortar 1: 4 ( one cement : four sand ) with brick size 22.90 x 11.2x7 cm including carriage of material up to all leads and lifts in all floors

Constructing course rubble hammer dressed U shape open surface drain with side wall 15x22cm in cement mortar 1:6 (one cement:six sand )and inside plastering with cement mortar 1:3(one cement:three sand)icluding earth work and laying 10cm cement concrete in 1:5:10(one cement:five sand:ten graded stone aggregate 40mm nomonal size and 7.5 cm cement concrete 1:2:4(one cement:two sand :four graded stone aggregate 20mm nominal size and finished with a floatingcoat of neat cement complete as per standard design including carriage of material up to all leads and lifts in all floors

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and pre polished machine cut for kitcken platform ,vanity counters ,window sills facias and similar locations of requird size, approved shade colour nd texture laid over 20mm thick base cement mortar 1:4 (one cement :four sand )joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing curing moulding and polishing to edges to give high gloss finish etc complete at all levels including carriage of material with in all leads lifts in all floor .

Extra for providing opening of required shade and shape for washbasin /kitchen sink in kitchen platform vanity counters and similar locations in granite stone including necessary holes for pillar taps etc including moulding and rubbing and polishing of cur edges complete

Providing edge moulding to 18mm thick granite stone counters ,vanities and stair steps etc including machine polishing to edge to give high gloss finish etc complete as per design approved by engineer in charge

Providing wood work in frames of false celling partitions etc. sawn and put-up in position. 2nd class Kail wood.

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately)( Spruce wood )

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third & fifth courses of blown or resideual bitumen applied at 1.45 kg 1.20 and 1.45 kg persq.mof area respectively second and fourth course of roofing felt type 3 grade i (hessain bese finished bitumen felt ) sixth and final course of stone girt 6 mm and down size or pea sized gravel spread at 6 cu.dm or (0.006 cu.m) per sq.m including preparation of surface excluding grading complete

Providing and fixing vitreous china wash down closet (European type W.C. pan ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately angle Indian universal closet including carriage of material up to all leads and lifts in all floors.(Ordinary Closet)

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan ) size 580mm (earth work bed concrete, foot rest and trap to be measured and paid for seprately . Orrrisa pan

Providing and fixing 10.00/12.50/15.00 liters vitreous china low level flushing cisterns with a pair of cast iron or mild steel brackets complete with fitting such as lead valve less siphon, 15mm (fifteen millimeters) nominal size brass ball valve with chromium plates brass handles unions and couplings for connections with inlet , outlet and over flow pipe 40mm ( forty millimeters) die chromium plates flush bend including cutting holes in walls and making good the same and connecting the flush bend with cisterns and closet (over flow) pipe tube measured and paid for separately , complete including carriage of material upto all leads and lifts in all floors

Providing and fixing in position brass mosquito proof couplings for over flow pipe of 25mm ( twenty five millimeters) nominal dia (over flow pipe tube measured and paid for separately ) including carriage of material upto all leads , lifts and in floor levels.

Providing and fixing white plastic sheet (solid type) and cover for wash down closet with chromium plated brass edges and rubber buffers complete including carriage of material with in all leads and lifts

Providing and fixing galvanished iron inlet connection for flush pipe with water closet pan including carriage of material upto all leads and lifts in all floors

Providing and fixing vitreous china wash basin with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials upto all leads and lifts in all floors

Flat back 550x400 MM ( Five hundred fifty millimeters into four hundred millimeters)

560mmx400mm(oval type under counter)

Providing and fixing vitreous china pedestal for washbasin complete recessed at the back for reception of pipe and fitting including carriage of material upto all leads and lifts in all floors

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. wase with C.I. of M.S. Brackets painted white including cutting holes and making same bu excluding fitting 610X 510MM with bowl depth 200MM

Providing and fixing 32mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including cost of carriage of material upto all leads and lifts in all floors.

Providing and fixing 32mm dia (thirty two millimeters ) M.I. union for wash basin or sink complete including carriage of material upto all leads and lifts in all floors

Providing and fixing 32mm dia (thirty two millimeters ) chromium plated brass S trap for wash basin and sink complete including carriage of material upto all leads and lifts in all floors

Providing and fixing 100mm dia (one hundred millimeters ) sand cast iron grating for gully floor or Nahni trap complete including carriage of material upto all leads and lifts in all floors

Providing and fixing CP brass bib tap ( superior or heavy quality) 15mm (fifteen millimeters ) dia with capstan head complete including carriage of material with in all leads lifts in all floors levels etc complete

Providing and fixing 15mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads complete in all respects including carriage of material with in all leads lifts in all floors

Providing and fixing CP brass angle valve 15mm without nuts and pipe

Providing and fixing CP brass bib tap ( superior or heavy quality) 15mm (fifteen millimeters ) dia with long body complete including carriage of material with in all leads lifts in all floors levels etc. complete

Providing & Fixing Mixer for Kitchen sink with casted swing spout at top.

Providing and fixing CP stop cock including carriage of material with in all leads and lifts15mm (fifteen millimeters)nominal bore

Providing and fixing 600mmx 450mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage of material upto all leads and lifts in all floors

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden plugs with CP Brass 600mmx20mm (six hundred into twenty millimeters) complete including cost of carriage of materials upto all leads and lifts in all floors

Providing and fixing 600mm x20mm (six hundred into twenty millimeters) glass self with CP brass brackets and guard rail complete fixed to wooden plug with CP brass screws including cost of carriage of materials upto all leads and lifts in all floors

Providing and fixing toilet papers holders chromium plated brass complete including carriage of material upto all leads and lifts in all floors

Providing and fixing PTMT Zet sprayer with 1.5mtr tube including carriage of material with in all leads and lifts

Providing and fixing PVC connection with brass union 45mm length 15mm (fifteen millimeters) size.

Providing and fixing PTMT soap dish with holder of approved quality and colour with steel screw and rawal plug complete including carriage of material with in all leads and lifts

Providing and fixing brass Full way valve with steel wheel including carriage of material with in all leads and lifts

15mm (fifteen millimeters)nominal bore

20mm(twenty millimeters)nominal bore

Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor complete including carriage of material upto all leads in all floors

15mm(fifteen millimeters) nominal bore

20mm(twenty millimeters)nominal bore

Providing and laying 20mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube (medium grade) tube fitting earth work in trenches tube measured and paid for separately complete including carriage of material upto all leads and lifts in all floor

Providing and G.I/M.I union of following nominal size including carriage of materials with in all leads, lifts in all floor level.

15mm (fifteen millimeters) size.

25mm(twenty Five millimeters) size

Making connection of gal vanished steel distribution branch with gal vanished mild steel main 20mm to 40mm (twenty millimeters to forty millimeters) nominal bore by providing and fixing tee including cutting and threading of the pipe complete with in all leads, lifts in all floors

Providing and fixing PVC water storage tank of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank)including carriage of material upto all leads and lifts in all floor

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110MM X 75MM including carriage of material upto all leads and lifts in all floor

Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked Including fixing with approved adhesive etc. Complete.

75mm nominal size (seventy five millimeters) size

110mm nominal size(one hundred ten millimeters) size

150mm nominal size(one hundred fifty millimeters)size

Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3 MM thick bolts and nuts complete including fixing with approved adhesive etc. Complete .

110 MM (one hundred ten millimeter Dia )

75 MM (Seventy five millimeters Dia )

providing and fixing PVC door band with oval access door insertion rubber washer 3 MM thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete

110 MM (one hundred ten millimeter Dia )

75 MM (Seventy five millimeters Dia )

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Constructing brick masonary chamber for under ground C.I inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand)C.I cover and frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size) 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3(one cement: three sand) finished with a floating coat of neat cementon wallsand bed concrete etc complete including curing complete. including carriage of material upto all leads and lifts in all floor

Inside dimensions 455mm x610mm x450mm deep for single pipe line

Inside dimensions 600mm x850mm x450mm deep for pipe line with three or more inlets

Providing and fixing white vitrous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x430x265mm sizes respectively with automatic flushing cistern with fittings R.S. or C.I. brackets standered size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I clamp complete including painting of cistern and fitting cutting and making good the walls and floors where required . One urinal basin with 5 litre automatic flushing cistern .

Providing and laying brick bats 50mm size including carriage of material with all leads and lifts and other incidentals

Providing and laying C.I manhole cover 50cm dia including carriage of material with all leads and lifts and other incidentals

Providing and laying 200mm cast iron rings with chequred or ribited non soli surface including and fixing in main holes with 200x200x200mm cement concrete 1:3:6 stone of 20mm nominal size including carriage of material with all leads and lifts and other incidentals

Ramesh Hetta

Hari Bhushan

A G Construction

Reena Thakur