DEFPROC

Active

Works

Civil Works

COMPREHENSIVE REPAIR AND MAINTENANCE OF EM EQUIPMENTS INCLUDING CONNECTED ITEMS AT ZONE I AREA UNDER GE MCEME SECUNDERABAD

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

SECUNDERABAD | Hyderabad, Telangana

Amount: ₹48 LCloses: 7 Oct 2026

Timeline

Published17 Sept 2026
Submission Opens1 Oct 2026
Closes7 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹48 L

EMD Value

₹96,000

Closing Date

7 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

GE MCEME SECUNDERABAD

Address

GARRISON ENGINEER MCEME, MCEME CAMPUS, TRIMULGHERRY (POST) SECUNDERABAD - 500015

Work Description

COMPREHENSIVE REPAIR AND MAINTENANCE OF EM EQUIPMENTS INCLUDING CONNECTED ITEMS AT ZONE I AREA UNDER GE MCEME SECUNDERABAD

Tender Information

Tender ID

2026_MES_789765_1

Reference Number

8793/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

SECUNDERABAD

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER TENDER DOCUMENTS

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY OF APPLICATION ON LETTER HEAD OF THE FIRM (.pdf)

RequiredSCANNED COPY OF DD FOR TENDER FEE (.pdf)

RequiredSCANNED COPY OF LATEST ENLISTEMENT LETTER/ONE TIME VERIFICATION OF ENLISTEMNT /ALL DOCUMENTS REQUIRE (.pdf)

RequiredSCANNED COPY OF EMD IF APPLICABLE (.pdf)

RequiredSCANNED COPY OF EPF REGN LETTER (.pdf)

RequiredSCANNED COPY OF GST REGISTRATION ALLOTMENT LETTER (.pdf)

Finance

RequiredTENDER DOCUMENTS (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE MCEME SECUNDERABAD

EMD Fee Amount

₹96,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Bid Opening

9 Oct 2026

Download Starts

17 Sept 2026

Download Ends

7 Oct 2026

Submission Starts

1 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (93 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including/without removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. Note: Taking down for existing surface point wiring including removal of conduit.	674	POINT	-	-
2	M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia, conduit wiring on walls including cutting and chasing of any type of wall, Junction boxes.Tee and provision of 2.0mm thick MS terminal boxes and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP.	200	POINT	-	-
3	All as per item No. 2 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator	40	POINT	-	-
4	All as per item No. 2 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .	40	POINT	-	-
5	All as per item No. 2 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.	40	POINT	-	-
6	All as per item No. 2 above but for One light point controlled by two 2 - way switch 5 amps, SP	2	POINT	-	-
7	All as per item No. 2 above but for One Bell point controlled by one bell bush switch 5 amps, single pole.	20	POINT	-	-
8	All as per item No. 2 above but using 2.5 Sqmm single core copper conductor cable for 3 pin 15 Amps switch socket combination point including running 2.5 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.	40	POINT	-	-
9	M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through any type of existing concealed/ existing surface conduit wiring and utilise the exiting MS terminal boxes ,covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP.	200	POINT	-	-
10	All as per item No. 9 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator	20	POINT	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.54 MB

Work Item Documents

Tender8793.pdf

Tender Documents • 0.74 MB

BOQ_885309.xls

BOQ • 0.52 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including/without removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. Note: Taking down for existing surface point wiring including removal of conduit.

674

POINT

M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia, conduit wiring on walls including cutting and chasing of any type of wall, Junction boxes.Tee and provision of 2.0mm thick MS terminal boxes and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP.

200

POINT

All as per item No. 2 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

POINT

All as per item No. 2 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

POINT

All as per item No. 2 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

POINT

All as per item No. 2 above but for One light point controlled by two 2 - way switch 5 amps, SP

POINT

All as per item No. 2 above but for One Bell point controlled by one bell bush switch 5 amps, single pole.

POINT

All as per item No. 2 above but using 2.5 Sqmm single core copper conductor cable for 3 pin 15 Amps switch socket combination point including running 2.5 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.

POINT

M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through any type of existing concealed/ existing surface conduit wiring and utilise the exiting MS terminal boxes ,covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP.

200

POINT

All as per item No. 9 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

POINT