Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC CHHURTA JHAJJAR KOTLI JAMMU J K 181222 | 181222 | L1 | Accepted-AOC Being 1st lowest bidder | |
| 2 | L2₹26.9 L+₹1.4 L (5.34%)Rejected-Finance MAIN ROAD KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU AND KASHMIR | 181221 | L2 | Rejected-Finance 2nd lowest bidder | |
| 3 | L3₹27.0 L+₹1.4 L (5.60%)Rejected-Finance 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance 3rd lowest bidder | |
| 4 | L4₹27.9 L+₹2.3 L (9.17%)Rejected-Finance | L4 | Rejected-Finance 4th lowest bidder | |
| 5 | L5₹29.1 L+₹3.6 L (13.9%)Rejected-Finance VILLAGE POST JAGANOO TEHSIL UDHAMPUR JAGANOO UDHAMPUR1 UDHAMPUR JAMMU KASHMIR 182124 UDYAM JK 22 0011509 | UDHAMPUR | JAMMU AND KASHMIR | 182124 | L5 | Rejected-Finance 5th lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
2 Jun 2022, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) DHAR ROAD UDHAMPUR
GE (ARMY) DHAR ROAD UDHAMPUR
COMPREHENSIVE MAINT OF CERTAIN BLDGS AT JAK LI RTC DHANSAL UNDER GE (ARMY) DHAR ROAD.
2022_MES_522100_1
8068/NIT-13/2022-23
Open Tender
Civil Works
Item Rate
180 days
DHANSAL
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
₹60,000
Yes
29 Apr 2023
5 May 2022
6 Jun 2022
6 May 2022
2 Jun 2022
19 May 2022
60 days
Amount
Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified.
Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.
Brickwork with sub class ‘B’ (except bricks) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified.
Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound including finishing the surface even and smooth without using extra cement complete all as specified. (supply only of W P C shall be measured and paid separately).
Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed
Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified.
Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified.
Preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified.
50mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
M & L for plain cement concrete 75mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub base, floors and paving etc. complete, all as specified and directed.
M & L for machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.
M & L for 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
Chequered cement concrete tiles 30 cm x 30 cm x 20-22mm thick with grey cement and no pigment machine pressed, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.
M & L for Plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping and the like incl weathering, slightly rounded or chamfered angles, incl necessary formwork and finishing the exposed surface, complete, all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
M & L for non skid coloured joint free ceramic tiles 300x300x 6-7mm thick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4,complete all as specified and directed.
M & L for non skid coloured joint free ceramic tiles 400x400x 7-8 mm thick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4,complete all as specified and directed.
Glazed ceramic tile 300 x 200 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed.
20-22 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
20 mm thick makrana white marble, machine cut, bedded and jointed with and including 20mm thick screed bed in cement and sand mortar 1:6 including cutting and polishing complete all as specified.
M & L for Virified Ceramic tiles 10 mm thick with dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 20 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
S&F PVC connection 15 mm size, of length 600 mm, with PTMT nuts supplied and fixed in repairs complete all as specified.
S&F in repairs PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed.
M&L 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs grating round 125mm size of PTMT fixed with cement motar.(Min weight 40 gms) complete all as specified and directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified and directed.
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified and directed.
S&F 15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and directed.
S&F 20mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and directed.
S&F in repairs angle valve of 15mm size PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and directed.
S&F in repairs stop valves cast copper alloy but fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.
S&F in repairs stop valves cast copper alloy but fancy type chromium plated with long shank and cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm,complete all as specified and directed.
S&F in repairs gate valves, with iron wheel head, screwed both ends for bore of 15 mm pipe complete all as specified and directed.
S&F in repairs pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, ccomplete all as specified and directed.
S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.
S &F Galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provison of galvanised mild steel wire staples or steel pins etc .complete all as specifed and directed. (Each line wire to be measured)
PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified.
Flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified.
Sink made of stainless steel 1.00 mm thick sheet for kitchen or Laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm with bowl size 410 mm x 330mm x 160mm supplied and fixed in repairs complete all as specified.
Sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm supplied and fixed in repairs complete all as specified.
Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified.
S & F for Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)
Ball valves, high pressure of brass with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repair complete all as specified.
Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repair complete all as specified.
Brass, CP wall mixer for mixing hot and cold water screwed down for 15mm dia iron pipe and fixed in repairs, complete all as specifed.
M & L for dismantling of water tank of capacity exc 500 and not exc. 1000 litres and removing to store and supply and fixing of 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid
M & L for dismantling of water tank of capacity exc 250 and not exc. 500 litres and removing to store and supply and fixing of 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White and screwed lid
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 sqm and not exceeding 4.00 sqm each and removing from site complete all as specified.
Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified.
Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified.
Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified.
PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified.
PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified.
35mm thick, 2nd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.
35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.
Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed.
Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.
250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.
200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.
150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.
Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified.
S&F in repairs 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified.
S&F in repairs door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weights between 80 Kg (aluminium Die cast) Body completed all as specified.
S&F steel window ( box type ) glazed and gauged using ERW hollow 'P' section double frame jointed internally with 25x3mm complete as per TD- 219(c) sheet 1/3 to 3/3 with side hung shutter including butt binges, steel handles and steel peg stay, towel bolt & guard bars complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and as directed.
S&F box type ventilators glazed/gauged including MS grills of square section 8mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and directed.
Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
S&F in repairs Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
Preparation of new steel surfaces of any description exc 10 cm width or girth, priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified and as directed.
03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.
03 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.
S & F in repairs for harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.
M/S SANJAY STEEL WORKS
MAHADEV ENTERPRISES
M/S PAWAN KUMAR ANAND
NARESH KUMAR KHAJURIA
devraj chalotra
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .