REPAIRS TO PLASTERING, FLOOR AND WALL TAILING, SANITARY FITTINGS, PLUMBING, JOINERY INCL CONNECTED WORKS FOR CE RND AND DMDE AREAS UNDER AGE B/R-II SECUNDERABAD

Amount

Taking down cement plaster on brick/stone/concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 including demolition of existing damaged brick work and removing debris outside MOD land including demolition of old brick work complete all as directed.

M & L for rendering 15 mm thick on fair faces of stone/brick/concrete surfaces in CM 1:6 finished even and smooth without using extra cement

M & L for rendering 10 mm thick on stone/brick/concrete surface other than fair faces of brick work or on one side of lathing in CM 1:4 finished even and smooth without using extra cement

M & L rendering 10 mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement

M&L preparation of new plastered or old plastered surfaces and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT

M&L for preparation of new/old plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT Note:- (i) The putty surface should be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage. ii) Paint work should be carried out by Authorised applicator with brand waranty.

M&L for preparation of old painted steel/iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L vitrified tiles of any shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed.

All as item No. 11 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of old skirting tiling and removing rubbish off the premises all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over a screed bed 20 mm thick in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of old dado/skirting tiling and removing rubbish off the premises all as specified and directed.

M&L Non skid cermic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 including dismantling old tiles complete

M&L for non skid ceramic tiles of 7 to 8mm thick square / rectangular area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm as in vertical surface etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with the colour of the tiles over rendering 10mm thick backing coat in cement mortar 1:4 including dismantling old tiles complete all as directed

M&L 20 mm thick granite work (table rubbedand polished) in steps, jambs, pillars, window cills, cooking platforms, landings and like incl 10 mm thick screed bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges,including demolition of old granite of any thickness complete, all as specified and directed.

Taking up or down steel tubing and connections and supply and fixing 15mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 20mm dia GI tubig, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

S&F in repairs 20mm bore gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed to bore of pipe 20 mm complete all as directed

S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.

S&F in repars angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia PTMT waste coupling incl brackets complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. Note :- Demolition of tiles/concrete requested and concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed

S&F in repairs plastic water closet seat, white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devise complete all as directed.

S&F in repairs steel finish Health faucet with anox 1 meter shower tube and clamp complete all as directed.

S&F in repairs grating doom (With or Without Hole) 125mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as directed.

S&F in repairs CP grating (With or Without Hole) of size 100/110 mm including fixing with white cement complete all as directed.

S&F in repairs CP brass two way bib tap of 15mm bore dia with capastan head, complete all as specified and directed.

S&F in repairs CP brass 3 in 1 wall mounted mixture with telephone hand shower complete..Make: Parryware or equivalent

S&F in repairs CP telephone hand shower complete.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 and n exc 4.0 sqm each, complete all as specifed and as directed.

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each and removing away from site complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with2,4 or 6 raised panel design with 2mm thick mouded PVC sheet on front face & 2mm plain colour PVC sheet on back face with particle board core all as per specification and directed.

S&F 35 mm thick Factory made pressed moulded panelled door shutter of single or multi panel textured masonite moulded door fabricated using well seasoned and chemically treated solid second class hard wood styles, rails and panels made out of tubular core bonded with PF synthetic resin conforming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's color, texture design as approved by GE all as specified and as directed.

S&F 35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

M&L running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed.

M&L in repairs 19mm thick pre-laminated particle board exterior grade pre-laminated on both sides with decorative choice lamination and other side balancing white lamination with round beading fixed with screws to timber frame work as in cup board shutters, pelmet boxex, shelves and similar items, including taking down old laminated work of any description complete all as directed

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature including dismantling existing window complete all as specified.

S& F of UPVC window/Ventilator with top hung shutters made out of profile width of frame 40 mm to 45 mm limit thermal conductivity to 1.3 kcal/sqm/hr centigrade sound insulation up to 4-0 bds density 1.46 gm/ml tenstile stremght 43.9 N/sqm, % Elongation at break - 215 tenstile mqduls-2840N/sqmm, Fluxural strenght-51N/sqmm heat angimg at 150 2200n / sqmm double baskets & wool pile on window multi point gear locking at different sides of frame with peg stay of sutable size to keep hung shutter in open position with temper proof screws with and incuding glazed shutters fixed with 3mm thick frosted sheet glass including dismantling existing window complete all as directed.

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165 including dismantling of old iron work complete all as directed.

Providing and fixing false ceiling with light weight calcium silicate tiles of spin tone surface textured 'Aerolite' make or equivalent of size 595x595mm having 15mm thick densified micro look edge in true horizontal level suspended on shilhouette profile suspension system of Grid made from hot dipped G.I steel section potary stitched double webbed power coated white consisting of main T-runner 42mm*14mm and 0.30mm thick and cross T of size 33mm*14mm and 0.30mm thick placed at 60cm centre to centre having width of flange 14mm with a 6mm reveal profile, (Black). The Grid system to be rested on the periphery wall/ partitions on a w-profile wall section made of precoated galvanized steel of dimension 3.0m long *(15mm + 10mm) *22.5mm and laying false ceiling for services like diffusers grills including cutting, making opening for services like diffusers frill light fitting, fixtures smoke detectors etc. Wherever required, main T-runner to be suspended from ceiling using G.I soffit cleats of size 25mm*35mm*1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I adjustable rods with galvanized level adjustment clips spaced as required at any heights as per specifications, including taking down existing ceiling board with frame work complete all as per direction of Engineer-in-charge.

Sai construction & services

Ravi Enterprises