Re construction of Administrative block at Govt. Polytechnic, Varkund, Daman. (2nd Call)

Amount

Civil work

EARTH WORK Excavation for foundation upto1.50 MT depth including sorting out and stacking of useful materials and disposing the excavated stuff up to 50 mt lead ( A ) loose or Soft Soil

Excavation for foundation up to 1.50 MT depth including sorting out and stacking of useful materials and disposing the excaveted stuff upto 50 mt lead (B) Dense or hard soil

Excavation for foundation for depth from 1.50 MT to 3.0 m depth including sorting out and stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt lead (B) Dense or hard soil

Filling in plinth with sand under floors including watering ramming, consolidating and dressing etc. complete

Filling available excavated Earth (Excluding Rock ) in trenchs, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering

CEMENT CONCRETE Providing and laying in position Ready Mixed M-150 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 320 kg ) as directed by Engineer-incharge including all material and labour complete.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg ) (a) Foundations, footings Bases of columns, pillars, Beam, Slab, coping, lintel etc. of any thickness, in all RCC Items and in all floor. as directed by engineer in charge.

Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 hand broken stone aggregates 40 mm. nominal size) and curing complete excluding cost of form work in :(a) Foundation and plinth

FORMWORK providing and formwork of ordinary timber planking so as give a rough finish including cenering, shuttering and propping etc. height of propping and centering below supprting floor to ceiling not exceeding 4 mt and removal of the same for in sity reinforced concrete and plinth concrate work in (A) Foundations, footing base of column etc. , and mass concrete.

providing and formwork of ordinary timber planking so as give a rough finish including cenering, shuttering and propping etc. height of propping and centering below supprting floor to ceiling not exceeding 4 mt and removal of the same for in sity reinforced concrete and plinth concrate work in (B) flat surface such as soffits of slab, landings and the like (1) floor etc. up to 200 mm in thickness.

providing and formwork of ordinary timber planking so as give a rough finish including cenering, shuttering and propping etc. height of propping and centering below supprting floor to ceiling not exceeding 4 mt and removal of the same for in sity reinforced concrete and plinth concrate work in (C) vertical surface such as wall (any thickness) partitions.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

providing and formwork of ordinary timber planking so as give a rough finish including cenering, shuttering and propping etc. height of propping and centering below supprting floor to ceiling not exceeding 4 mt and removal of the same for in sity reinforced concrete and plinth concrate work in (G) column pillars, post and strust. (1) square , rectangular, polygonal in plan

providing and formwork of ordinary timber planking so as give a rough finish including cenering, shuttering and propping etc. height of propping and centering below supprting floor to ceiling not exceeding 4 mt and removal of the same for in sity reinforced concrete and plinth concrate work in (M) staircase with sloping or stepped soffits, including riser and stringers excluding landing.

REINFORCEMENT Providing and fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc completeup for ground floor and first floor

Providing and fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc completeup for second floor

Providing and fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc complete for third floor

BRICK WORK Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Providing and fixing masonary work with AAC (autoclaved aerated concrete) blocks 0.23 mt wide, with minimum compressive strength of 3 N/mm2, density of around 575 kg/cu mt and fixing them with ultratech fixobond jointing mortar etc complete as per the instruction given by engineer-in-charge for ground and first floor

Providing and fixing masonary work with AAC (autoclaved aerated concrete) blocks 0.23 mt wide, with minimum compressive strength of 3 N/mm2, density of around 575 kg/cu mt and fixing them with ultratech fixobond jointing mortar etc complete as per the instruction given by engineer-in-charge for second floor

Providing and fixing masonary work with AAC (autoclaved aerated concrete) blocks 0.23 mt wide, with minimum compressive strength of 3 N/mm2, density of around 575 kg/cu mt and fixing them with ultratech fixobond jointing mortar etc complete as per the instruction given by engineer-in-charge for third floor

Providing and fixing masonary work with AAC (autoclaved aerated concrete) blocks 0.10 mt wide, with minimum compressive strength of 3 N/mm2, density of around 575 kg/cu mt and fixing them with ultratech fixobond jointing mortar etc complete as per the instruction given by engineer-in-charge for ground and first floor

Providing and fixing masonary work with AAC (autoclaved aerated concrete) blocks 0.10 mt wide, with minimum compressive strength of 3 N/mm2, density of around 575 kg/cu mt and fixing them with ultratech fixobond jointing mortar etc complete as per the instruction given by engineer-in-charge for second floor

DOOR WINDOW Providing and fixing in position partly fixed and partly openable door with single / double shutter and made with standard extruded anodised hollow section of size 100 x 38 mm frame of approved shade and filled with indian wood and shutter made of 35 mm thick water proof flush door of greenlam, everest, kitply or equivalent make with 1 mm thick laminate of royal touche, greenlam, euro or equivalent make of any shade on both the sides with necessary hardware of high grade anticorrosive AISI 316 matt stainless steel of kich or equivalent make like handle (200 mm), dead lock, door stop, stopper, hinges with necessary adhesive (fevicol) with all labour etc complete as per the drawing provided by the architect

Providing and fixing colour anodised aluminum window, partially openable / partially fixed glass window using main frame jindal #8462, 0.526 kg/m, # 8464, 0.764 kg/m,shutter frame of jindal 8463, 0.760 kg/m and clip, section jindal 8461, 0.286 kg/m with silicon packing & rubber gasket with 5 mm thick toughened glass in shutter and 5mm clear glass (modi float, saint gobain, asahi or eq.) and Imax top hung hinges and AISI 316 GRADE stainless steel handles of KICH or eq., locking arrangement complete with fixing etc complete as per the drawing supplied by the architect

Providing and fixing aluminum window, partially openable / partially fixed glass window using main frame jindal #8462, 0.526 kg/m, # 8464, 0.764 kg/m,shutter frame of jindal 8463, 0.760 kg/m and clip, section jindal 8461, 0.286 kg/m with silicon packing & rubber gasket with 5 mm thick toughened glass in shutter and 5mm clear glass (modi float, saint gobain, asahi or eq.) and Imax top hung hinges and AISI 316 GRADE stainless steel handles of KICH or eq., hocking arrangement complete with fixing {VENTILATOR)

Providing & fixing Louveres of Aluminium anodized aluminium sections as horizontal members at 75 mm c/c and 100 x 25 x 2 mm (Wt. 1.089 kg/m) aluminium vertical section 125x25 mm (Wt. 1.52 kg/m) fixing and erection on site and making surface good etc. complete as per design

PLASTER providing 15mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a flouting coat of neat cement slurry with Niru finish complete. For ground floor and first floor

providing 15mm the cement plaster in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a floating coat of neat cement slurry with Niru finish complete. For Second floor

providing 15mm the cement plaster in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a floating coat of neat cement slurry with Niru finish complete. For Third floor

providing 10mm the cement plaster on ceiling in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a floating coat of neat cement slurry with Niru finish complete. For ceiling ground floor and first floor

providing 10mm the cement plaster on ceiling in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a floating coat of neat cement slurry with Niru finish complete. For second floor

10mm the cement plaster on ceiling in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a floating coat of neat cement slurry with Niru finish complete. For third floor

20 mm thick sand faced cement plaster on walls upto height 10 meters above ground level consisting of 12 mm thick backing coat of C.M. 1:3 (1-cement: 3-sand) and 8 mm thick finishing coat of C.M. 1:1 (1-cement: 1-sand) etc. complete including all material and labour as directed by Engineer in charge

Providing and applying Stonecrete plaster or equivalent of average thickness 18 mm consisting of 15 mm thick smooth mala plaster in cement mortar 1:3 (1 cement : 3 fine sand), with necessary grooves, curing etc complete for all heights as per the pattern given by the architect and as instructed by the engineer-in-charge

Providing and fixing dry Red Agra stone cladding of minimum 25 mm thickness on wall surface over 15 mm thick cement plaster 1:3 (1 cement : 3 sand) with all grooves and pattern for any size and fixing the stone with required clamps of hilti make or wet Red Agra stone cladding by fixing stone directly on the plaster with chemical of bal endura, weber make and grouting it with chemical or equivalent and filling the grooves with cement grout and as per all the specifications and design given by the Architect and directed by the Engineer-in-charge

FLOORING Providing and laying indian type water proofing treatment on tarrace (a) applying neat cement sulrry 2.75 Kg / sqn of cement admixed with water proffing compound after cleaning the surface (b) laying cement concrete using brick bats 25 to 100 mm size with 50 % of CM 1:5 admixed with water proofing compound over 20 mm thick layer of CM 1:5 to required slope including rounding of junction of wall and slabs (c) after two days of proper curing applying a secon coat of cement slurry (d) finishing the surface with 20 mm thick CM 1:4 and china mosaic tiling & finaly finishing teh surface with trowel with white cment slurry (e) after finishing the whole tarracae shall be flooded with water for a peroid of two weeks

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick as per the pattern provided by the architect

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. as per the pattern provided by the architect

providing and laying 24" x 24" double glazed vitrifed 8mm thick tiles of approved make, clour and pattern for flooring over 20mm (Average ) base of cement mortar 1:6 (1-cement : 6 coarse sand ) on new surface or fixing on existing flooring by adhesive materials including dismentalling of existing flooring and jointed with colour cement slurry including finished with flush pointing and celaning the surface etc. complete for Light shade

providing and laying 24" x 24" double glazed vitrifed 8mm thick tiles of approved make, clour and pattern for dedo on 10 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry on new surface and jointed with colour cement slurry including finished with flush pointing and celaning the surface etc. complete for Light shade

Providing and laying glazed tiles 300 mm x 450/600 mm 6 mm thick in skirting, risers of steps and dado on 10 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry

providing and laying polished kota stone slab flooring over 20mm thick base of cement mortar 1:6 (1cement : 6 coares sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc coplete. 30mm thick

Providing cement vata (10 cm X 10 cm size) quarter round in Cement Mortar 1:1 including neat cement finishing, watering etc complete

Providing and filling approved quality of cinder in sunk slab/duct including watering, ramming, consolidation and dressing etc. complete as directed for all floors.

providing and applying cementitious acey polymer coating with fiber cloth net over the slab/sunk slab/chhaja ets. With reguler tools. Tockles, mat, chemical , labour etc comp. of traperetei isi/chemband Ar/ powercreat or fixit with 5 years performance guarantee certificate as required as per the instruction given by the engineer-in-charge all Sunk floors

Providing and fixing mirrror polished KANDLA GREY cladding on openings of width 125 mm and thickness minimum 20 mm with top and both exposed edge polished and joining with chemical adhesives of bal, weber or equivalent make after driving holes in stone at 500 mm c/c and screwing and fixing with araldite as per the drawing and as per approved by the Architect.

Providing and fixing mirrror polished KANDLA GREY cladding on openings and thickness minimum 20 mm with top and all exposed edge polished and joining with chemical adhesives of bal, weber or equivalent make after driving holes in stone at 500 mm c/c and screwing and fixing with araldite as per the drawing and as per approved by the Architect.

Providing and constructing of 0.80 mt high sandwich type cooking platform made from telephone black granite stone top slab of mimium 18 mm thickness, 25 mm thick both sides polished kota stone horizontal and vertical members, telephone black granite facia with flat edge, 450 X 400 X 165 mm size stainless - steel sink of nirali make including cement, sand, chemical - araldite including all labour, fixing, cutting holes etc. complete. as per drawing given by the Architect and instruction given by Engineer in charge.

RAILING & GRILL Providing and fixing MATT FINISHED 304 grade stainless steel railing in staircases and passages with 50 mm dia. Handrail and 1.5 mm wall thickness, 50 mm diameter baluster and 1.5 mmwall thickness with accessories placed at about 1.2 mt c/c distance and 2 nos of 16 mm diameter horizontal members with 1.2 mm wall thickness including installing of KICH Arch, Dunex or equivalent brand etc complete as per the direction given by the engineer-in-charge

Providing & fixing M.S. grill for window of required pattern to wooden frames of windows/ brick masonry with necessary M.S. angle, M.S. pipe, M.S. flats and other structural steel at required spacing and frame around square or round bars with round headed bolts and nuts or by screws including cutting welding and fabrications etc. complete as directed, grills design and pattern approved by this office . ( B ) Plain Grill

PAINTING Wall painting (three coats) with one coat of BIRLA WHITE primer & BIRLA WHITE putty & with plastic emulsion paint of Asain royale, ICI velvet touch brand, Berger , Nerolac or equivalent and manufacture on wall surfaces to give an even shade including thouroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Wall painting (three coats) with one coat of BIRLA WHITE primer & BIRLA WHITE putty & two coats of plastic emulsion paint of Asain royale, ICI velvet touch brand, Berger , Nerolac or equivalent and manufacture on wall surfaces to give an even brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. On ceiling and sloping roofs

Painting two coats (including priming coat) on new steel and other metal surfaces with enamel paint of Asain royale, ICI velvet touch brand, Berger , Nerolac or equivalent brushing interior to give an even shade including cleaning the surface of all dirt, dust and othr foreign matter.

Carrying out wall treatment for termite control including spraying with chemical solution in oil base (0.5 Lit./ Sq.M.) including labour and material Using Hepachlor concentration 20 EC. As Per IS. 6316_paret-II Consentration by Weight 0.50 percent is recommended i.e one litre chemical emulsion dillute with 39 liter gof IS concrentration total dillite concentration will be 40 litre inclusive of one litre chemical emulsion appication at the rate of 7.5 Litre chemical / Sqm of surface is recommended as per I.S

Finishing wall with 100 % weather proof paint of Asain - Apex ultima, ICI - Weathershield Max make on wall surface in 2 coats over 1 coat of primer of Asian, ICI make of required shape and even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc complete

MISCELLANEOUS Providing , fixing and connecting to watersupply lines, PVC over head water tanks SINTEX make of 5000 litres each as per water supply design

Providing and fixing mirror polished telephone black granite slab for platform for wash basin and thickness minimum 20 mm with top and exposed edge polished and fixing in wall including making groove in wall making it good by filling cement mortar 1:3 including cutting holes for wash basin as directed as directed by the engineer-in-charge

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

providing and drilling various All (rebaring) diameter various mm. depth and fixing various diameter of steel bar with appoxi mortar hilty HY150 or equivivalent with required materials, drilling machine, tools, laboures etc complete. As per the instruction given by the engineer-in-charge

Providing and Core cutting work of various diameter and various size depth with required corecating drill machine, fastners tools, labour and supervision etc complete.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4 .O M between supporting floor to ceiling including temporary brick or stone pillars for supporting as required. (iii) Height more than 6.0 M. and upto 7.0 M (upto 10 ton)

Supplying, stacking, laying and packing locally available red/ black/white approved hard rubble stone for soling in one layer of 230mm thickness only including arranging the stones in proper grade and camber and filling the interstrices with quarry spalls/stone chips as directed

Labour work of sand blasting work on cladding stone including all material and macheneries required to the satisfaction of Architect.

Providing and applying anticarrasive treatment with polymer base materials to the steel rainfarcement including descaling the dust and applying the preventive coating of approved make (for the R.C.C. structures near coastal area only) etc complete.

PLUMBING Providing & fixing wall hung type white E.W.C - `P’ trap with PVC pan connector, CI chair, soft seat cover, C.P. brass hinges, including all internal fittings, rubber buffers, C.P. nuts, bolts, brackets, etc all accessories for complete installation, making holes in walls, floors, & making good.

Providing & fixing of slim dual flush concealed tank with frame, flush plate, bend pipe & required accessories & civil work for complete installation

Providing & fixing of slim exposed wall hung flush tank & required accessories & civil work for complete installation

Providing & fixing of 32 mm CP concealed Metropol Flush Valve with round flange, & required accessories & civil work for complete installation.

Providing and fixing White glazed vitreous Wash Basin oval shaped wall mounted type with supporting M.S. or C.I. Brackets, P trap with rubber adapter for waste connection and waste coupling.; with rag bolt fittings.

Providing and fixing 32 mm CP bottle trap / P trap with extension piece & wall flange complete.

Providing and fixing basin PRESSMATIC CP pillar tap with required braided pipes from basin pillar tap to angle valve etc complete.

Providing & Fixing of Acid proof Lab sink with 40 mm waste connection, p trap,waste coupling & all required accessories & civil work. The scope shall also includes taps for each sink as per requirement

Providing and fixing grab bar fabricated from 300 mm long stainless steel tube in bath room with non slip gripping surface, polished wall flange at end of bars with heavy duty anchor fasteners & accessories.

Providing & fixing in position best Indian make surface mounted CP toilet paper holder complete in all respects including cutting and making good the walls etc.

Providing & fixing in position 15 mm C.P. brass 2 way bib cocks of best quality

Providing & fixing 15mm C.P. brass angle valve with C.P. with wall flange complete, including cutting and making good the wall where required.

Providing & fixing Glass liquid soap container of best quality.

Providing & fixing stainless steel sink, R.S. or C.I. Painted brackets painted, 40mm dia. C.P. waste, waste coupling, required accessories including cutting and making good the walls wherever required with sink cock & accessories complete

Providing & fixing white vitreous china flat back urinal of size 590x375x390mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,waste coupling, C.P. wall flange complete including cutting and making good the walls and floors wherever required.

Providing & fixing of 20 mm CP concealed stop cock with wall flange and complete., for the following sizes.

Providing & fixing of 15 mm CP bib cock with wall flange and complete., for the following sizes.

Providing & Fixing of water cooler with inbuilt Purifier/R.O, with valve & all accessories - 50 ltr.

Providing & fixing of 3 layer HDPE tank with all connections, etc. Capacity -10,000 ltr.

Providing & fixing of 3 layer HDPE tank with all connections, etc. Capacity -5,000 ltr.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to ASTM D-2846 SDR 11 upto 2" & Sch. 40 above 2" having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. Size 15 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to ASTM D-2846 SDR 11 upto 2" & Sch. 40 above 2" having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. Size 20 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to ASTM D-2846 SDR 11 upto 2" & Sch. 40 above 2" having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. Size 25 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to ASTM D-2846 SDR 11 upto 2" & Sch. 40 above 2" having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. Size 32 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to ASTM D-2846 SDR 11 upto 2" & Sch. 40 above 2" having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. Size 40 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to ASTM D-2846 SDR 11 upto 2" & Sch. 40 above 2" having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. Size 50 mm

Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. Size 20 mm

Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. Size 25 mm

Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. Size 32 mm

Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. Size 40 mm

Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. Size 50 mm

Supply, instalation, testing & commissioning of gunmetal, male or female threaded isolation control valve confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. Size 65 mm

Supplying, fitting & fixing Gun metal Non return valve suitable to 10 kg/sq.cm etc. complete. Size 25 mm

Supplying, fitting & fixing Gun metal Non return valve suitable to 10 kg/sq.cm etc. complete. Size 50 mm

Supplying, fitting & fixing Gun metal Non return valve suitable to 10 kg/sq.cm etc. complete. Size 40 mm

Supply, Installation, Testing and Commissioning of 25 mm dia. air release valve.

Providing and fixing pressure type brass body float valve with plastic float : Size 50 mm

Providing and fixing uPVC pipes & fittings conforming to ASTM D-1785 Sch. 40 for cold water supply including fittings, fixing the pipe in trenches, with clamps at 1.00m spacing. This includes jointing of pipes & fittings and testing of joints complete as per direction of engineer in charge. Size : 40 mm

Providing and fixing uPVC pipes & fittings conforming to ASTM D-1785 Sch. 40 for cold water supply including fittings, fixing the pipe in trenches, with clamps at 1.00m spacing. This includes jointing of pipes & fittings and testing of joints complete as per direction of engineer in charge. Size : 50 mm

Providing and fixing uPVC pipes & fittings conforming to ASTM D-1785 Sch. 40 for cold water supply including fittings, fixing the pipe in trenches, with clamps at 1.00m spacing. This includes jointing of pipes & fittings and testing of joints complete as per direction of engineer in charge. Size : 65 mm

Providing and fixing uPVC pipes & fittings conforming to ASTM D-1785 Sch. 40 for cold water supply including fittings, fixing the pipe in trenches, with clamps at 1.00m spacing. This includes jointing of pipes & fittings and testing of joints complete as per direction of engineer in charge. Size : 75 mm

Providing fixing, testing and commissioning in position 3 RmtSWR PVC PIPE TYPE-B self fit pipe for soil/waste/vent, comforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offests, cowl, access pieces/clean out plugs, clamps /supports/ hangers etc. jointing with PVC Adhesive joints including cutting holes in walls and making good the same. (Inside the Building i.e. Internal TOILET ) Size : 110 mm

Providing fixing, testing and commissioning in position 3 RmtSWR PVC PIPE TYPE-B self fit pipe for soil/waste/vent, comforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offests, cowl, access pieces/clean out plugs, clamps /supports/ hangers etc. jointing with PVC Adhesive joints including cutting holes in walls and making good the same. (Inside the Building i.e. Internal TOILET) Size : 75 mm

Providing fixing, testing and commissioning in position 3 RmtSWR PVC PIPE TYPE-B selfit pipe for soil/waste/vent comforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offests, cowl, access pieces/clean out plugs, clamps /supports/ hangers etc. jointing with PVC ring joints including cutting holes in walls and making good the same. (Inside the Building i.e. Downtakes) Size 160 mm

Providing & fixing PVC Floor Trap OR multi floor trap with 50 mm water seal & with necessary distance piece and 150x150mm grating, making necessary SLAB /WALLholes and cutting walls, etc complete. 110 X 75 mm

Providing & fixing of P trap with riser & jali with all civil work required including core cutting Size : 110 x 75 mm

Providing and fixing PVC Pipe ISI marked brand as per IS:4985 (6 kg.) complete with PVC Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the Engineer-in-Charge. (Wash out pipes from fixture to trap) - 50 mm

Providing and fixing PVC Pipe ISI marked brand as per IS:4985 (6 kg.) complete with PVC Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the Engineer-in-Charge. (Wash out pipes from fixture to trap) - 40 mm

Providing and fixing PVC Pipe ISI marked brand as per IS:4985 (6 kg.) complete with PVC Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the Engineer-in-Charge. (Wash out pipes from fixture to trap) - 110 mm

Providing and fixing PVC Pipe ISI marked brand as per IS:4985 (6 kg.) complete with PVC Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the Engineer-in-Charge. (Wash out pipes from fixture to trap) - 75 mm

Providing & Laying CC 1:5:10 bedding for above undeground piping with required civil work 160 mm

Constructing masonry inspection/manhole Chamber inside with 75 second class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for drainge, with CI medium duty chamber cover & frame with RCC top slab, required 75 mm thick PCC 1:3:6 bed, necessary excavation and inside and outside plastering with neat cement having 12mm thick. & with 12 thick MS plate cover with required angles.etc. complete with excavation, backfilling, curing, finishing, etc. complete. Size : 600 x 600 mm

Constructing masonry inspection/manhole Chamber inside with 75 second class designation brick work in cement mortar 1:4 (1 cement :4 fine sand) for drainge, with CI Light duty chamber frame & cover(total wt. 38 kg) with RCC top slab 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:4:8 (1 cement :4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside and outside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete including using waterproofing compound as per standard design, orange colour PVC coated foot rests including making channel in 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) Size : 900 x 800 mm

Constructing masonry inspection/manhole Chamber inside with 75 second class designation brick work in cement mortar 1:4 (1 cement :4 fine sand) for drainge, with CI Light duty chamber frame & cover(total wt. 38 kg) with RCC top slab 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:4:8 (1 cement :4 fine sand : 8 graded stone aggregate 40 mm nominal size) and inside and outside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete including using waterproofing compound as per standard design, orange colour PVC coated foot rests including making channel in 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) Size : 1200 x 900 mm

Providing and fixing square mouth SW gully trap grade `A’ complete with C.I. grating brick masonry chamber with first class bricks and water tight double seal C.I. cover with frame of 300 x 300 mm internal size. The weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg. as per standard design. Size : 300 x 300 mm chamber with 160 x 110 mm size `P’ trap. Supply, installation, testing & commissioning of Plants & equipments with required accessories, electrification, etc.Suppying, installing, testing and commissioing of Domestic Hydropneumatic System comprising of Vertical multistage / horizontal centrifugal Pumps with CI casing, SS impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all accessories viz., base plate, foot valve, starianer, coupling, motor, cascading PLC based control panel, dry run & overload protection, cabling up to panel, earthing, GI medium duty suction, delivery & header pipes, pressure gauge, pressure switches, pressure transmitter, suction ball valves & delivery ball valves & check valves etc., complete.

To pump domestic water from UG tank to 3 nos.OH tanks 1 Set : No. of pumps : 3(2W+1S), Capacity 200 LPM/pump, , 40 mtr. , Tank - 100 ltr.

Supply, installation, testing & commissioning of inline filter & anti scaling device with all interconnection piping, valves, gauges, accessories, mounting frame , etc.complete. Flow : 10 mtr3/hr.

Supply, installation, testing & commissioning of water level controller for OH tanks with two float switches, hardwares, 3 mtr. cabe, etc.

SI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete inall respect including initial fill and wall suspension brackets & shall conform to IS 15683

ISI marked Fire Extinguisher, Dry Chemical powder type capacity 6 kgs, conformingto IS : 15683 including first fill & wall suspension bracket

Electrict Works: SECTION - 1-1 Point wiring in Copper [TISSINO] Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. (a) with medium class Rigid PVC pipe and accessories

Section - 1-2 Point wiring in Copper (MODULAR) Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. with medium class Rigid PVC pipe and accessories Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. with medium class Rigid PVC pipe and accessories Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. For 6A Plug with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories Cat. III

[III] For 16A Plug with 2-4 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. with medium class Rigid PVC pipe and accessories Cat. III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge Two Pin/RJ-11 Telephone Socket For One Gang

TV Co-axial Socket outlet

Modem Jack for Computer Open RJ-45

6 Amps. Bell Push

(19) Modular Indicating Call Bell

Section :- 1- 3 / Conduits & Pipes Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (a) 20 mm

Junction Box [C] G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling screw of following size. 150mm x 150mm x 60/75 mm depth

250mm x 250mm x 60/75 mm depth

300mm x 300mm x 60/75 mm depth

350mm x 350mm x 60/75 mm depth

400mm x 400mm x 60/75 mm depth

Section 1-4 Mains & Wires Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (c) 2 wire 1.5 sq. mm

(d) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

(g) 4 wire 4 sq. mm

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (b) One wire 1.50 sq. mm

(d) One wire 4.00 sq. mm

(e) One wire 6.00 sq. mm

(f) One wire 10.00 sq. mm

(g) One wire 16.00 sq. mm

(h) One wire 25.00 sq. mm

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. e).RG-11

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm (a) Unarmoured 2) Two Pairs

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [C] CAT - 6

Providing & erecting main Distribution (MDF) indoor type, back mounted frame. (c) Suitable for 50 pair

Section 1/5 Concealed Boxes & Laminated Sheets Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC box erected flushed on wall or concealed in wall with necessary plastering & finishing as directed of following size. (a) 100 mm x 100 mm x 75 mm(d)

(b) 175 mm x 100 mm x 75 mm(d)

(c) 200 mm x 250 mm x 75 mm(d)

(d) 250 mm x 300 mm x 75 mm(d)

Section 1-6 Wiring Accessories Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed 1 no. 6A/16A universal plug-switch combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular Type Accessories

SECTION 3-4 / MOULDED CASE CIRCUIT BREAKERS SWITCHGEARS & DISTRIBUTION BOARDS Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating up to 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S.housing

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating mechanism A.C.23 duty confirming to IS for (d)200 A

SECTION 3-6 CHANGEOVER SWITCHES. Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections. (A) Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. Capacity

SECTION 3-10 / MINIATURE CIRCUIT BREAKERS. Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 Amp.

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 Amp.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp.

Providing and erecting Two way Centre off Double pole MCB Change Over Switch (IS 13947-3 / IEC 60947-3) in existing box. (b) for 40 Amp.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (F) Single phase 8 way SS Double door

(L) Three phase 6 way SS Double door for single phase outgoing horizontal box

(N) Three phase 8 way SS Double door for horizontal single phase outgoing

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed (ii) 40Amps. DP Cat. III

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 6 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. [a] 6A / 10A / 16A / 20A / 25A 2 pole single phase Cat. II

SECTION 3-13 / DANGER NOTICE BOARDS. Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

SECTION 3-14 EARTHING Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs,Back filling Compound : 1 no. Bag of 25 Kg.

SECTION 3-16 / CUPBOARDS. Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (B) locally fabricated panel board (i) with 350mm depth

CHAPTER - IV / CABLES & WIRES SECTION 4-3 / ARMOURED ALUMINIUM CABLES Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

(D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm

(c) 4 core 10 Sq. mm

(d) 4 core 16 Sq. mm

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. (A)50 mm dia

(B)90 mm dia

(C)120 mm dia.

SECTION 4-6 / CABLE GLANDS. Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 2 to 4 core 6 Sq. mm

(d) 2 to 4 core 10 Sq. mm

(e) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core 95 Sq. mm

SECTION 4-7 CABLE LUGS. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

(B) 10 Sq.mm

(C) 16 Sq.mm.

(G) 95 Sq.mm.

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

(B) 10 Sq.mm

(C) 16 Sq.mm.

CHEPTER-V FANS SECTION 5-1 / CEILING FANS AND ACCESSORIES Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge]

SECTION 5-2 FAN ACCESSORIES Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site as original.

SECTION 5-3 TABLE FANS, EXHAUST FANS & ACCESSORIES Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers

SECTION 6-7 TIME SWITCHES Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

CHEPTER -VII EPABX SYSTEM, SOUND SYSTEM & SIRENS SECTION 7-1 EPABX SYSTEMS Supplying & erecting Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots, Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / E1 & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialling facility, QSIG protocol on PRI, 95 / STD / ISD / Local- Locking ,Class of Service, Quick Dial- Single Digit dialling of any two external numbers, Once only ring device, Boss/Secretary- Do not Disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialling, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing. With Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF,CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation(ASMDR), DID Direct Inverse Dialling, External Music Input, Fax Homing, Global Directory Printing. with following capacities [C] No of Extension 48, No of Junctions 8, No of expandable ports:128, Operators Console - 01 Compatible: ISDN

Supplying & erecting Push button type telephone instrument (A)BEETEL Secure / BPL/, SONY / PANASONIC or equivalent make

Supplying & erecting Single line BEETEL / BPL / SONY/ Panasonic or equivalent make push button type Cord Less telephone instrument.

SECTION 7-2 / CONFERENCE SOUND SYSTEM Supplying & erecting Philips / Ahuja make Chairman unit comprising - 63 dBV, 7.5 mv/pa gooseneck microphone, Talk switch, Priority switch, Talk Switch LED, Ring LED indicator, connecting cable 6 core shielded, 2.5mtr long with, female plug, 300 mw 8 ohms impedance speaker, connector for Delegate unit, volume control device fitted in heavy cast aluminium housing..

SECTION 7-3 SOUND SYSTEM EQUIPMENTS AMPLIFIERS Supplying & erecting Philips / Ahuja / Unisound make Amplifier having following specification: Power Output :100 W (RMS):(130 W Max.) inputs :5 Mics & 2 Aux. frequency Response :50-15000 Hz+3db Tone Controls :Cut & Boost type Speaker Matching :4-8-ohms 70- 100 V line LED Meter :5 LED Array. The amplifier suitable to operate 240V A.C.& 24 volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connection.

SECTION 7-4 / MIXERS/MIXING CONSOLES Supplying & erecting Mixing Console having channels, Audio mixer with. Echo facility for live performance, Auditorium & stadiums, having following features & facilities. (a)input Channels :- Each channel has separate 6.25mm size balanced phone jack for mike & line for balanced & unbalanced signals. (b)Individual gain control for sating optimum level for minimum noise. (c)BASS, MID & TREBLE ‘ controls Separately for each input channel. (d)ECHO control for each channel (e)PAN control for echo channel for left or right output (f) AUX Control : To control , level of the channel in final mix to AUX sound output (g)Channel ON/OFF switch (h)ECHO Section :- ECHO, reverb & Chorus effect can be added to all input channel by different setting of Delay, Reverb & Level control. (i)Tape section (j)Aux. send & return For sending Pre-feeder output of channel for monitoring or adding a special effect unit. (k)Mono / Stereo output controls (L)Master faders to control over left & right output (m) Head phone output for monitoring purpose. Technical specification (a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line Output Low : -10 dB / -2 dBM Line Output High : 0 dBM / +17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB, 0.775V) The Console shall be mounted on standard Rack, The channel of following numbers. (B) 9 Channel Audio Mixer with ECHO

Supplying & erecting Philips / Ahuja make four channel Echo Mixer Pre-amplifier with following specification. (i) Suitable to operate on 24OV.A.C. & 12 V D.C. Battery supply (ii) B.B.D. Delay system ECHO facility on all inputs through ECHO volume, Repeat & Delay system. (iii) Peak LED for setting optimum distortion free input levels (iv) Two outputs, variable for line & fixed for recording (v)Compatible with Audio Mixing consoles

SECTION 7-5 SPEAKER (a) With 4 speakers, capacity of power handling 45W (MAX) & 30 W RMS, each speaker have impedance of respectively 300 ohms / 30 W, 500ohms/20W,I -K.ohms/10 W, 2K. ohms / 5W.

Supplying & erecting recess wall mounting speaker with 5W rated input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or ceiling of following size. (a)Round Shaped, 230mm dia. Speaker

SECTION 7-6 MICROPHONES Supplying microphones stands with sturdy mechanism, treble free movement & positioning of microphones, free from rust with superior quality of chrome plating with following size. (c)Fixed height 91 cms. & extendable up to 62 cms. with round base of dia. 23 cms.

Supplying, installing and testing approved make microphone for All purpose, with frequency response of 100 - 11000 Hz, having sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied with quick detachable holder, 6 mtr twin core cable & 3 pin XLR connector.

Supplying, erecting & testing Approved make Microphone for announcement, speech & general P.A. application with frequency response of 150 - 10000 Hz having sensitivity 2mv/Pa, & impedance 600 Ohms supplied with quick detachable holder, 6 mtr twin core cable & PCIM / MCIF connector.

Supplying & testing approved make miniature Omni directional electrets condenser Tie Pin microphone with wide angle pickup having frequency response of 100 - 16000 Hz having sensitivity 5mv / Pa & impedance 1000 Ohms supplied with tie pin / clip, 6 mtr. long soft flexible microphone cable & 1.5v mercury battery.

Supplying & testing wireless microphone system Philips / Unisonix make for 92.5 MHz FM operation With effective range 200 feet with microphone having facility for frequency adjustment & receiver with LED indicator Telescopic antenna with battery cells.

SECTION 7.9 / MISC. ELECTRICAL APPLIANCES Providing & erecting approved make Fingerprint and card based Premium Door Controller with LCD and Keypad having following features. (A) Optical Fingerprint and Card based Reader (Card personality Module not included] (B) Dot-Matrix LCD and Touch sense Keypad (C) Built-In interfaces like door lock, door sense, exit Reader, Exit switch, Ethernet RS485, Aux Input & Aux Output Port (D) 5000 Events, Access Control, Time Attendance, Tamper Detection (E) 4 LEDS and Buzzer

CHAPTER -VIII AIR CONDITIONS, WATER COOLERS & WATER HEATERS SECTION - 8 - 3 / SPLIT AIR-CONDITIONERS Providing and erecting approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) (A) for 1.5 ton capacity

SECTION 8-8 WATER COOLERS Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc model or equivalent symphony/ crystal/videocon model)

8-9 / Refrigerator Supplying approved make domestic refrigerator of 165 Ltr to 185 Ltr storage capacity, single phase minimum 3 star rating.

SECTION 8-10 / POWER CAPACITORS,UPS & VOLTAGE STABILIZER Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free batteries. The charger having operating capacity for input 160-270V AC & inverter having output 23OV,5O Hz Ac with 0.8 load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries. (D) 5 KVA (i)With 11 Nos. of 12 V 55 Ah SMF batteries

CHAPTER - IX MOTOR PUMP SETS Supplying and erecting approved make set of indicator lamps of LED type lamp, lens cover, Bakelite holder complete erected with necessary connections.

SECTION 9-4 OPEN WELL TYPE HORIZONTAL MONO BLOCK PUMPS [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe

SECTION 9-5 STARTER PANELS Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses. Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single phasing preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable) protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be erected on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make only) (a) DOL up to 5.0 H.P.

SECTION 9-6 SUBMERSIBLE PUMPS Supplying submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more than 5 H.P. with following capacity .. (b) (16 stage) 140 to 180 LPM discharge at 96 to 69 mtrs. head respectively suitable for 50mm dia. delivery pipe

Lowering of submersible motor pump set complete with required. Nos. and size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with water. (b)Above 60 mtrs. and Up to 120 mtrs.

(d)For Open well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP

SECTION 9-7 PIPES AND PIPE FITTINGS Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size. (c) 3 Core x 4 Sq. mm

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating material, water proofing material, & making the joint complete. (A) Up to 10Sq. mm

Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (D) 50 mm dia

Supplying and erecting with leak proof materials, M.S. Heavy duty ISI marked coupling having threads of 8 TPI/11 TPI suitable for ‘C’ class pipe to take load of pump and pipe assembly of following size andTPI :- (C) 50 mm(2") dia. pipe 8 TPI

Add cost of leak proof complete welding surrounding pipe and coupling for use as column pipe for following size (A) 50mm, 65 mm

Cutting the heavy duty pipe and threading one end of pipe with 8 TPI / 11 TPI as per requirement and including to and fro charges. (B) 50mm (2") dia pipe

Heavy duty clamp made from 4" x 1.5" iron strip suitable for column pipe 1.5" to 2" length. (B) 50mm(2") dia pipe

Supplying & erecting G.l. bend for pipe connections suitable for (D) 50 mm(2")

Supplying & erecting ISI Marked G.l. Elbow for pipe connections suitable for (D) 50 mm(2")

Supplying & erecting ISI Marked G.l. Reducer Elbow for pipe connections suitable for (D) 50 mm(2")

Supplying & erecting ISI Marked G.l. Union for pipe connections suitable for (D) 50 mm(2")

Supplying and erecting ISI marked sluice valve at position with necessary material for following size of pipe diameter. (D) 50 mm(2")

Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked suitable for following size (A) 50 mm dia.

Supplying of following size of STANDARD UPVC column pipe with coupler and wire lock [D] 50 mm dia

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity AMF Control Panel for75 KVA/82.5 KVA3 phase DG Set

CHAPTER-XVI LED/INDUCTION LIGHT FITTING SECTION-16-1-LED FITTINGS LED 96X0.2Watt Tube light 19 Watt , 1890 Lumens, Surge-4 KV

LED 18Watt Tiltable down light 24 Watt ,2340 Lumens, Surge-4 KV

LED 121X0.3Watt Recessed mounted down light 45Watt , 4235 Lumens, Surge-4 KV

LED 12X1 Watt Wall Washer 15 Watt 1560 lumens Surge 4KV

27 U Rack

12u RACK

24 Port switch gigabyte chip D-LINK 10/100/100

24 port patch pannel

Netgear R6220 AC-1200 Smart WiFi Router with External Antennas OR iBall Baton iB-WRD12EP 1200M High Power Dual Band Wireless AC Router

D-Link DSL-2750U Wireless N 300 ADSL2+ 4-Port Wi-Fi Router with Modem (Black) OR i Ball iB-WRA300N3GT Wireless ADSL2 Router

Installation Per Router

LG 20 LED with HDMI monitor

Supply, installation & commissioning of High Resolution Fixed IR Camera (with all accessories) IP Outdoor PTZ Camera 2.0 Mega Pixel (1920 * 1080P) Real Time Resolution 2 MP 3.6mm Fix-Focal Lens. 24 Pcs. IR LED For Up To 20 Meters IR Distance. Onvif Supported. Metal Bullet Motion Detection/BLC/Image Setup/ Day/Night/AGC RVIB-AM-2024

Supply, installation & commissioning of High Resolution Fixed IR Camera (with all accessories)1.3 Mega Pixel (1280 * 960P) Real Time Resolution 2 MP 3.6mm Fix-Focal Lens. 24 Pcs. IR LED For Up To 20 Meters IR Distance. Onvif Supported. Dome Motion Detection/BLC/Image Setup/ Day/Night/AGC RVID-AM-1324

VIF METER

200/5 CURRENT TRANSFORMER BURDEN 15VA

Hitendra A Patel

Anand Associates