SPECIAL REPAIRS TO PF-12 OF B SUB DEPOT AT CAD PULGAON

Amount

Dismantling of asbestos cement sheets any corrugation including ridge as in roof covering complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position fillet, rails, posts, rafters, purlins etc in unframed works complete all as specified and directed.

Dismantling of timber fillet under 40 Sqcm in section, in any position fillet, rails posts, rafters, purlins etc in frame works complete all as specified and directed.

M&L for rolled mild steel section as in main and cross beam, hip and jack rafter, purlins, brackets, extentions for rafters fixed on wooden members for fixing galvalume sheet where connected to common rafters and running rails and guides for sliding doors, doors repairs with sheet fixed with angle cleats or other connecting plates, Fe-290 (Gde E-165) including drilling, cutting,bolting, welding etc. complete all as specified and directed. Note applicable for each item: 1. For cutting, drilling, welding etc machine will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any shape and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc , fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutters etc. fixed with self tapping screws as specified and directed.

Cutting holes into or through brick/ stone walls built in cement mortar or cement lime mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required of superficial area exceeding 150 Sqcm but n exc 400Sqcm complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed. Note: 1. For demolition, power for drilling machine will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting

M&L for cement concrete 1:2:4 type B1, (20mm graded aggregate) as in copings, cills, sesmic and similar bands, plinth courses, string courses, lacing courses, parapet etc. Including weathering, slightly roundede or chamfered angle and throating and use of formwork complete all as specified and directed.

M & L in repairs 2nd class hard wood wrought timber framed and fixed as in trusses and scantiling, any type of frame work, in cladding, purlins, rafters etc including cutting, drilling, bolting etc complete all as specified and as directed.

All as per above item No 10 here in before but except wood

Taking down timber roof trusses clear span above 4m & up to 8m, coupled rafters or truss beam complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S & F in repairs wrought iron or mild steel work as in MS wind ties of specified size for AC Sheet roofing including all necessary drilling,bolting or riveting etc and similar work coinforming to Fe-290 Gde E-165 all as specified and directed by EIC.

Fixing only in repairs only MS wind ties after fixing of AC sheet all as specified and directed by EIC.

Preparation of new or old wooden surfaces of any description and girth, not otherwise described and treating with creosote completed.

S&F in repiars Black, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in wall partition/cladding etc. complete all as specified and as directed.

All as per item No 17 but Except Sheeting

M & L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces or rusted old surfaces in wind ties, sheets etc exc 10cm width or girth including preparation of new or rusted steel surfaces all as specified and directed by EIC.

M & L for painting with one coat of synthetic enamel paint on old steel painted surfaces in wind ties, sheets etc exc 10 cm width or girth including preparation of old steel painted surfaces all as specified and directed by EIC.

M & L in repairs for random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6, all as specified and directed.

All as per above item No 21 here in before but except stone

M&L rendering 15mm thick in CM 1:6 on fair faces of brick/ stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick (in two coats of 10mm under coat and 5mm plaster) on fair faces of brick work/ stone or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement for both coats mixed with integral water proofing compound at the rate of 3% by weight of cement all as per manufactures instructions incl necessary scaffolding etc for any height complete all as specified and directed. Note: water proofing compound will be measured and paid seperately.

Supply only Integral water proofing compound of make IMPERMO/ ACCOPROOF complete all as specified and directed.

Taking down cement or cement lime plaster of any description from stone/ brick or concrete surface of wall/ ceiling etc including racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M and L preparation of newly plaster surface on external wall surfaces and applying two coats of cement base paint over over a coat of primer complete all as specified and as directed.

M and L for one coat of cement base paint (plain) over old decorated / unplastered surfaces of walls of any description including preparation of treated plastered / unplastered surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coat of white wash on wall complete all as specified and directed.

M&L for preparation of old platered surfaces including corners etc by brooming down or steel wire brushing and applying one coat of white wash on walls complete all as specified and directed.

M&L for PCC 1:3:6, 75mm thick type C2 as in plinth protection complete all as specified and directed.

M & L for 100mm cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in flooring and finishing cement concrete surface even and smooth without using extra cement complete including demolition of old existing concrete all as specified and directed by Engineer in charge. Note: 1. For demolition, power for drilling machine will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting

Forming 12mm thick Expansion joints in 100mm thick concrete slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com­pound, Grade ‘A. ’

Forming contraction (Dummy) joint 30mm deep x 10 mm wide with 'A' grade sealing complete all as specified.

M&L Repair to mild steel door including greasing, oiling, etc., without taking down the mild steel door complete all as specified and as directed.

M&L taking down the mild steel door of PFs or ESHs and repairs required like Straightening bent doors and fixing again including greasing, oiling, etc. complete all as specified and as directed.

S&F for expanded metal, n exc 4kg per Sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complet all as specified and directed.

M&L for flush pointing to random rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and as directed.

M&L for raised pointing to random rubble or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) but exceeding 1.5Sqm and not exceeding 4.00Sqm each complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, framed, rebated on the sloid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12mm thick timber flat on both sides of veneered particle board medium density BWP confirming to ISO 3097 exterior grade solid core with commercial face veneers both face supplied and fixed to chowkats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F second class hard wood factory made glazed and skeleton door/window shutter 35mm thick, open rebated and prepared to receive glass, gauze ect divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I 1991 section 8 clause 8.20 (b) complete all as specified and directed.

M&L for preparation and treating ends of posts, back of chowkats etc area of tarred exc 0.10Sqm but n exc 0.50Sqm complete complete all as specified and directed.

M&L for preparation and treating small articles area tarred n. Exc 0.10 Sqm each such as hold fast end of post, back of chowkhats complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazed with oil putty or fixed with beads in square n exc 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix butt hinges 100mm long medium weight, cold rolled mild steel of approved quality with ISI mark complete all as specified and directed.

Supply and fix butt hinges 75mm long medium weight, cold rolled mild steel of approved quality with ISI mark complete all as specified and directed.

S&F Alu. Anodised barrel tower bolts 150mm long extruded section complete all as specified and directed.

S&F Alu. Anodised barrel tower bolts 75mm long extruded section complete all as specified and directed.

S&F Alu. Anodised handle 150mm long extruded fabricated type complete all as specified and directed.

S&F Alu. Anodised handle 75mm long extruded fabricated type complete all as specified and directed.

S&F mild steel frame work confirming to FE 290 Gde-E-165, such as grill gratings, doors (openable or sliding) etc. With ends of bars shouldered and rivetted or forged in to spikes, framed guard bars and similar work complete all as specified and directed.

Cutting holes in brick/stone/concrete walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n. Exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F mild steel flat iron as in hold fast 25x6mm confirming to FE 290 Gde E-165 complete all as specified and directed.

Supply and fix in repair of aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 300mm size complete all as specified and directed.

M&L preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10cm width or girth an applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/any type of frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S & F in repairs 1.60 mm thick MS sheet plain black steel door and similar work cut to size, holes, punched including round headed screws with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as requried all as directed.

Excavation in trenches in all kinds of soil, n exc 1.50m wide and by mechanical means (Hydraulic excavator) exc 1.50m in depth; for foundations, etc. or for manholes, drains, culverts etc not exc 10 Sqm on plan and not exc 1.5m in depth including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out excavated soils and disposal of surplus excavated soil as directed, within a lead of 50m completed all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete.

M & L for brick work fly ash brick with modular size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 on fair surfaces of brick work or concrete surfaces, is to be finished even and fair without using extra cement complete all as specified and directed.

M&L cement concrete type C1 1:3:6 using 20 mm graded aggregate as in coping, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Removing excavated soil to a distance exc 250m and not exc 500m and depositing where completed all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils complete all as specified and directed.

Supply and fixing in repair of copper strip 20mmx3.00mm with saddles, and fixing screw etc for roof conductor and down conductor along the walls including taking down existing damaged unserviceable strip complete all as specified and as directed.

Supply and fix in repair test point terminal block made out of gun metal or phosphorous bronze of size 75 mm x 75 mm x 25 mm, drilled and screwed including 03 Nos 8 mm dia 25 mm long hexagonal head screws including taking down existing damaged unserviceable block complete all as specified and as directed.

Supply and fix in repair PVC rectangular block of size 100 x 100 mm and 50 mm deep thickness not less than 3.00 mm to accommodate test terminal block 75x75x25mm including taking down existing damaged unserviceable box complete all as specified and as directed. Make: ISI approved

Supply and fixing copper ropes of size 8 SWG or 4 mm dia 7 wire binding to shackle type insulators including fixing clamps with new nut & bolts to roof post complete all as specified and as directed.

Supply and fix in repair shackle type porcelain vitreous, white insulator for working pressure 1100 volts of 90 mm dia and 75 mm height including galvanized mild steel strips of 30mmx3.00mm size 12 mm dia insulator, bolts, washers, nuts etc complete all as specified and as directed.

Supply only insulator(Epoxy) DMC connector for strip 25x3mm with brass nut, bolt and washer complete on a distance of 60 cm or complete all as specified and as directed.

Supply,fixing and testing elapp Brass copper lightening arrester 5/8' diameter and 1 m in length with 5 spikes and base plate for building protection coverage 45 degree from top point of the arrestor

Supply and fix in repair GI pipe 40 mm bore light grade including bends, sockets etc for earth strip laid in ground/floor, fixed on wall with proper clamping complete all as specified and as directed.

Material and labour in repair for earthing complete with copper earth plate electrode of size 60cmx60xcmx3.15mm buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below the normal ground level connected to copper earth strip 20x3mm size as earth lead by means of copper bolts, nuts, check nuts and washers of galvanised iron or steel, protected by GI pipe medium grade 32mm bore all as shown on electrical plate No 3 of SSR Part-I connected to earth test point electrode, PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm bore medium grade etc and testing on completion complete all as specified and directed. (Note :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 cover 50mm thick reinforced with 8mm dia TMT bar @ 100 mm c/c both ways, funnel with watering pipe 20mm bore medium grade, GI protection pipe medium grade 32mm bore and wire mesh and adequate quantity of charcole and salt complete. Note No 2 :- Rate of copper earthing strip and GI protection pipe up to 7.5 m shall be included in unit quoted rate of this item

M&L for mild steel cross arms (not less than 40X40X6 mm size) , bracings supports, clamps and back plates fabricated from structural steel sections,iron rod and channel including nuts, bolts, washers welding, bending cold or not, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.

M/s MM TRADERS (BID ID -3236453)

M/S JAI BHAWANI CONSTRUCTIONS (BID ID -3235952)

SIBAL AND SIBAL (BID ID -3236418)

I P Constructions (BID ID -3236398)

Chintamani Constructions (BID ID -3236081)

SHRIKANT CONSTRUCTION (BID ID -3236189)

M/S.Chourasia Construction Company (BID ID -3236068)

Bidder Name

SIBAL AND SIBAL

M/S.Chourasia Construction Company

Chintamani Constructions

M/s Dara Constructions, Pulgaon

M/s MM TRADERS

M/S JAI BHAWANI CONSTRUCTIONS

I P Constructions

SHRIKANT CONSTRUCTION