Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC VIVEKANANDA SUPER MARKET IST FLOOR ROOM NO 8 HILL CART ROAD PO SILIGURI DIST DARJEELING PIN 734401 | DARJEELING | WEST BENGAL | 734401 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹47.9 L+₹1.8 L (3.83%)Rejected-Finance DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 | JALPAIGURI | WEST BENGAL | 734004 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹48.2 L+₹2.1 L (4.52%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹48.2 L+₹2.1 L (4.56%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹48.3 L+₹2.1 L (4.63%)Rejected-Finance SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹42.7 L
EMD Value
₹85,440
Closing Date
27 Mar 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
SPL REPAIR TO BLDG NO T 88 AT RPA FLT/ARMY AVN SQN (R AND O) LOC U AREA UNDER GE SUKNA AND CERTAIN OTHER SANCTIONED WORKS UNDER GE SUKNA IN SUKNA MIL STN.
2024_MES_645574_1
GE Sukna/8652
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Sukna
₹85,440
Yes
19 Apr 2024
7 Mar 2024
28 Mar 2024
7 Mar 2024
27 Mar 2024
20 Mar 2024
8 Mar 2024 - 27 Mar 2024
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, LT under ground cables, GI pipe for trenches, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M&L for sand cushioning in trenches for cushioning of LT underground cable including spreading, levelling, well ramming in layers not exceeding 25cm in depth, complete all as specified and directed. Note : Punned thickness of 18 cm shall only be measured and paid.
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or broken boulders complete all as specified and directed.
Boring/Drilling (horizontally) manually upto 2m depth in soil below existing road suitable for passing GI tubing of 40 to 80 mm bore and getting out and disposal of soil to a distance n.exc 50 meter complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L plain cement concrete 1:3:6, type C-1( using 20mm graded crushed stone aggregate ) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.
M&L plain cement concrete 1:2:4, type B-1(using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.
M&L for reinforced cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for reinforced cement concrete ,1:2:4, Type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for reinforced cement concrete ,1:2:4, Type B-1 (using 20 mm graded stone aggregate) as in chajjas, etc complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
Supply only integral water proofing compound complete all as specified and directed.
Supply and fix sub class 'B' bricks of standard size for cable protection in trenches complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:6 but except bricks complete all as specified and directed.
M & L for brick work with sub class ‘B’, straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for burnt brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick but except bricks complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks in one brick thick honey-comb wall built in cement mortar 1:4 but except bricks complete all as specified and directed.
M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting and polishing over 20 mm thick screed bed in CM (1:6) complete all as specified and directed.
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete, flat / curved complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed.
S & F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour; articles not exceeding 200 Cum each complete all as specified and directed.
Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed.
S&F factory made wire guazed (panel will be wire guazed in lieu of plain PVC sheet) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail i.e; panel will be of wire guaze. The wire gauze shall be wrapped on an additional square 8 mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. Note:- Wire cloth / wire mesh shall be measured seperately. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F of 200 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S&F 250 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 100 mm long Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S&F towel rail, 18 mm (minimum) dia & 600 mm long of aluminium anodised of brass chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.
S & F galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples including wooden beads complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
S&F Mild steel screw bolts diameter of neck 16 to 20 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but not exc. 30 cm long complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars but 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F rolled mild steel in plates, gusset plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.
S & F of roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.
S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1998 grade St – 240 complete all as specified and directed.
S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including filling of cement mortar or cement concrete necessary fixing lugs, hinges, lock strike plates complete all as specified and directed.
S&F aluminium powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, sliding window three track, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed.
S&F decorative curtain rod of wooden finish powder coated of 20 mm dia including 06 nos. curtain ring per running metre complete all as specified and directed.
S&F decorative type wooden finish double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod fixing with screws complete all as specified and directed.
S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to Anodised aluminium snap grid frame size 605x605 mm work for false ceiling Hangers with 6 mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including cover fillets complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products
M&L 18mm thick medium density fibre (MDF) board, both side laminated of approved colour, interior grade and fixing with screw to timber/steel frame work complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
All as per Sl item No. 53.00 above but in skirting etc. laid over and including screed bed 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
M&L coloured glazed ceramic tiles 450 x 300 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 20 mm thick screed bed in CM 1:6 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed.
M&L 50 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as sub base filling etc. complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, sub base, floors, paths, hardstanding etc. finish even and smooth without using extra cement complete all as specified and directed.
M&L 100 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in floors, paths, hardstanding, plinth protection, sub base, etc. complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain even and smooth finish complete all as specified and directed.
M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L complete removal of existing treatment of old plastered or previously untreated walls surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain even and smooth finish complete all as specified and directed.
S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.
S&F 5 mm thick plain sheet glass ordinary quality fixed with aluminium frame work exc 0.50 sqm in each pane complete all as specified and directed.
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint complete all as specified and directed.
Supply and fixing GI tubing light grade 80 mm dia for protection of pipe along with nuts bolt washers or laid in trenches under roads complete incliding taking out if required complete all as specified and directed . Make : Jindal steel/ Tata or equivalent.
Supply and fixing GI tubing medium grade 32 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall complete including taking out if required complete all as specified and directed. Make : Jindal steel/ Tata or equivalent.
Supply and fixing GI tubing light grade 40 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall complete including taking out if required complete all as specified and directed. Make : Jindal steel/ Tata or equivalent.
S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
S&F in repairs 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
S&F in repairs 15 mm bore brass CP basin mixture, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs 15 mm bore brass CP wall mixture, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - SQT-520KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 405 x 355 x 178 mm and including 32 mm waste pipe & coupling complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (EWC) European pattern excluding fixing bolts flushing cistern and flush pipe complete all as specified and directed.
S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for european water closet pan complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc and including dismantling the existing basin, complete all as specified and directed.
S&F in repairs shower chromium plated 15mm bore cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No.- EOS-542N or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S&F in repairs 15 mm bore bib taps, long body chromium plated, fancy type, cast copper alloy with crutch or butterfly handle and wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Essco Cat No.- SQT-511KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag
S&F in repairs health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - ALE-ESS-585 or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series) Make:- Jaquar, Cat No. - ALD-565 or equivalent in Hindware (QUEO & Italian Collection) / Prayag (D’OR Series) / Cera (Premium / Luxury Range)
S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed.
S & F in repair of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and directed.
S&F in repairs 15 mm bore stop valves/ angular stop valve, concealed type, fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - SQT-514EKN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets guards and railing 60 cm long complete all as specified and directed.
S & F for corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 25cm wide with chromium plated bracket guard complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls and including taking down of old materials complete all as specified and directed.
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors and including taking down of old materials complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F in repairs PVC (SWR) 110 mm bore bend, of any radius complete all as specified and directed.
S & F in repairs of 110 mm bore PVC (SWR) branch piece, Single (Single ‘Y’) equal or unequal complete all as specified and directed
S & F in repairs of 110 mm bore PVC (SWR) junction Double, (cross ‘T’) equal or unequal complete all as specified and directed
S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S & F in repairs of 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement including top cover grating complete all as specified and directed.
S&F in replacement rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.
S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and removing to distance not exc 50 meter complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section unframed work complete all as specified and directed.
Dismantling Unframed timber scantlings fillets, rails, posts, rafters, purlins, etc. over 40 Sqcm in section and in any position in framed work complete all as specified and directed.
Dismantling of old CGI/ PGI sheets in roof covering complete all as specified and directed.
Dismantling and taking down OH ACSR conductor of any size including taking down insulator from poles complete all as specified and directed.
Taking down copper / aluminium concealed point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit, cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down old unseviceable DB with MCB/RCB/Isolator any size and any capacity complete all as specified and as directed.
M&L for point wiring for light points / fan points controlled by one, one way switch with (FRLSH) PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including , PVC medium grade Concealed conduit not less than 20mm dia with MS sunken box , hylem sheet of min thickness 3.0 mm for mounting switches,socket and regulators etc all necessary wall cutting and making good disturbed surface complete all as specified and as directed. Note 1: - Red/yellow/blue colour cable should used for phase connection, Black colour cable should be used for neutral connection and green cable should be used for earthing connection, separate cable for earthing and neutral to be used for each individual circuit from the distribution board/Switch board. Note 2: - Joints in wire/cable in between switch board and points are not allowed. Note 3: - Circuit from DB for 15 A points, light points and 5 A points shall be shall be separate and independent. Note 4: - All socket points shall be provided to Table top height for easy of operation. Note 5: - All earth wire shall be terminated to DB's Earth Bus for further connection with earth pit.
All as per item No 114.00 here-in-before but for 5 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm cable for phase neutral and earth complete all as specified and directed.
All as per item No 114.00 here-in-before but for 3 pin 5 Amps S/Socket pt. on independent board with 1.5 sqmm cable for earth, neutral and phase complete all as specified and directed.
All as per item No 114.00 here-in-before but for 3 Pin socket outlet 5 Amps same board with other switches with cable 1.5 Sq mm size complete all as specified and directed.
S & F switch piano type 5 Amp single pole one way complete all as specified and directed.
S&F for switch socket combination 5 pin 6A/16-20A Amps, flush type, 240 Volts, flush type universal complete all as specified and directed.
S&F for switch socket combination 5 pin 6 Amps, 240 V Flush type complete all as specified and directed.
M & L for socket outlet 5 pin 5 Amps, flush type, without shutter 240 Volts, universal complete all as specified and directed.
S & F for ceiling rose surface Bakelite 65 x 50mm three terminal complete all as specified and directed.
S & F electronic fan regulator flush type 230V, AC, 50 Hz not less than 100 W complete all as specified and directed.
M&L for MCB SP 6-32A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and directed.
M&L for MCB SPN 32-40A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and directed..
M&L for single pole blanking plate for distribution board complete all as specified and directed.
Supply and fixing distribution board (DB) SPN 8 ways, with neutral and earth bus bar 200 A rating 230 Volts, single door, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.
M &L for sub main wiring with PVC insulated (FR-LSH) cable standard copper conductor 1100 volts grade with two run of of size 2.5 sqmm multistrand unsheathed (Red/yellow blue colour cable used for live connection & Black colour cable used for neutral connection) and one run of 2.5 sqmm copper multistrand conductor 1100 volts grade PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC casing capping/PVC conduit of size 25 mm for including of all accessories complete all as specified and directed. Note : i) Three runs of 2.5 sqmm cable with conduit pipe / casing caping shall constitute one unit
M &L for sub main wiring with PVC insulated (FR-LSH) cable standard copper conductor 1100 volts grade with two run of of size 6 sqmm multistrand unsheathed (Red/yellow blue colour cable used for live connection & Black colour cable used for neutral connection) and one run of 6 sqmm copper multistrand conductor 1100 volts grade PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC casing capping/PVC conduit of size 25 mm for including of all accessories complete all as specified and directed. Note : i) Three runs of 6 sqmm cable with conduit pipe / casing caping shall constitute one unit
Supply and fixing in repairs (in existing point or new point all as directed by the Engr-in-Charge) Inverter LED Batten square or round profile with the following specifications: - (i) Wattage: - 9 to 12 Watts (ii) Supply: - 230V, AC, 50 Hz (iii) Shape: - Batten fittings square or round profile (iv) Type of cover: - Frosted (v) Nominal life time: - 25,000 Hrs (vi) Colour temperature: - 4500-6500K (vii) CRI index: - 80-90 (viii) Battery: - Not less than 2200mAh or not less than 4 hrs backup (ix) Backup time: - Not less than 4 Hrs (x) Lumens: - Not less than 900 Lm and on battery not less than 400 lm (xi) Efficeacy: - Not less than 80 Lm/Watt
Supply and fix in repairs surface & wall mounted LED light fittings with curve diffuser with 18/20/22 w indoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications :- (i) System Watts/lumens: - Max 18/20/22 W/Total system lumen not less than 1800 Lm. (ii) Housing: - Extruded polycarbonate (iii) IP rating: - IP 20 (iv) Front cover: - Acrylic/polycarbonate/glass cover (v) Mounting: - Suitable for wall/ceiling mounting (vi) Finish: - Smooth finish (vii) Lamp: - High bright LED (viii) System Efficacy (lm/Watt): - Not less than 90 lm/watt (ix) Colour temperature: - Not less than 5700 K (x) Colour rendering index (CRI): - Not less than 80 (xi) Life: - Not less than 25000 hrs of operation (xii) Optics: - Designed for optimum light distribution with curve diffuser (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV (xv) Heat sink: - As per OEM's design.
Supply and fix in repairs surface & wall mounted LED bldg security light fittings with 30 w outdoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - 30 W/Total system lumen not less than 3000 Lm. (ii) Housing: - Pressure Die casting (iii) IP rating: - IP 65 (iv) Front cover: - Acrylic/polycarbonate/glass cover (v) Mounting: - Suitable for wall/ceiling mounting (vi) Finish: - Smooth finish (vii) Lamp: - High bright LED (viii) System Efficeacy (lm/Watt): - Not less than 100 lm/watt (ix) Colour temperature: - Not less than 5700 K (x) Colour rendering index (CRI): - Not less than 80 (xi) Life: - Not less than 25000 hrs of operation (xii) Optics: - Designed for optimum light distribution with curve diffuser (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV (xv) Heat sink: - As per OEM's design
Supply and fixing ceiling fans complete with blades, down rods, electronicregulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note : Old Ceiling Fan to be deposited in MES Store.
S&F exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint complete all as specified and as directed. (The quoted rate is including for taking down and depositing old fan to MES store). Make :- Havells, VentilAir - DX or equivalent in Orient / Crompton.
M &L of Earthing with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected using galvanised wire 4 Sq mm as earthing electrode by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe (medium grade) and other end connected to earthing test point as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be made again by the contractor at no additional cost complete all as specified and directed.
Supply,laying testing and commissoning of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 10 sqmm 4 core, complete all as specified and directed.
Supply,laying testing and commissoning of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 25 sqmm 4 core, complete all as specified and directed.
Supply,laying testing and commissoning of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 50 sqmm 3.5 core, complete all as specified and directed.
Supply,laying testing and commissoning of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 95 sqmm 3.5 core, complete all as specified and directed.
M&L for weather proof flat three core aluminium cable conductor of size 1.5 Sqmm for connection of lights to Pole Box, after dismantling old one complete all as specified and directed.
M&L for PVC conduit 20mm dia fixing to pole from JB to security light complete incl fixing arrangement to pole with the help of 03 pairs of clamps and nut bolts complete all as specified and as directed.
S & F Pole box of size 130 x 130 x 77 mm ,made of high quality thermoplastic polycarbonate, dust & jet water proof, chemical, acid corrision, impact IK-09, insulated & shock proof IP 66, grey RAL 7035 color with internaly embedded gasket (PUR) , along with cover and metric knockout all sides including back of the base must including terminals 4Nos including fixing arrangement with MS flat of size 40X4mm , nuts , bolt and washers complete all as specified and as directed. Make :Hensel cat no KF 0606 G /Emitter/Spelberg
Supply, install, testing & commissioning of LT panel board "out-door type" of size 900 mm (height) x 1000 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI approved with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable & 4 side slanting canopy on roof top. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick CRCA sheet duly pre-treated & powder coated, supporting frame made out of 50X50X6 mm angle iron & legs 0.6 m long from GL, suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork and including the following accessories .
S&F in repair 6 KW three phase automatic strreet light control panel with and including digital timer switch for automatic operation on/ off street light as per set time through programmable 24 hrs switch , 32 A TP, Power contactor, 40 A SPN MCB wall /floor moutable, IP 54 enclosure made out of CRCA sheet duly powder coated conforming to IS/IEC 60954-4-1 in built short circuit protection , locking arrangement with padlock and panel lock & taking down complete all as specified and directed.
Supply and fixing in replacement LED security light 60 watt, IP-66, Efficeacy >= 110 Lm/watt sealed toughned glass cover, PDC aluminium housing with integrated lens polycarbonate cover with single control gear, SPD complete all as specified and as directed. Make: Cat No. LST-60-CDL-M of Crompton or equivalent in Havells/Surya/ Philips
Supply and fixing in replacement LED security light 90 watt, IP-66, Efficeacy >= 110 Lm/watt sealed toughned glass cover, PDC aluminium housing with integrated lens polycarbonate cover with single control gear, SPD complete all as specified and as directed.
M&L in replacement for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead wire of 32x6 sqmm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismentaling old unsv ones complete all as specified and as directed by the Engineer-in-Charge.
M/S B B CONSTRUCTION
M/s TALCO
M/S GLORIOUS CONSTRUCTION
R N SAH N CO
ASHISH ROY
A K ENTERPRISES
Janata Enterprises
D K SARKAR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .