Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹63,490
Closing Date
20 Jan 2026, 2:25 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
TPI Agency
RCF
90 days
Expenditure
General
ELECT
3 conditions
Material is to be procured from the RCF sources of the main assembly for RCF Item ID: 2400045 (Switch Board cabinet for LHB EOG AC coaches) available on IREPS Vendor Directory (U-VAM portal) "OR" from the sources of item mentioned in the BOM of RDSO specification Sr. No. 01 of Annexure of RDSO letter No. EL/7.1.108/MSSBC dated 17.09.2021, 12.04.22 & 13.04.22. NOTE : ACCEPTED MAKE & CAT No.: L&T Salzer - Part No. 74168SLB32LOGBSS, Schaltbau - Part No. M137.0827407.R1, Technotrendz - Part No. IS81210TT19, KAYCEE (Restricted to 25% Quantity) - Part No. 12580892A34V49XE OR any other RDSO approved make attached.
1. Firms who are participating as an authorized dealer of RCF Sources of the main assembly for RCF Item ID: 2400045 (Switch Board cabinet for LHB EOG AC coaches) "OR" Firms who are participating as an authorized dealer of sources of item mentioned in the BOM of RDSO specification Sr. No. 01 of Annexure of RDSO letter No. EL/7.1.108/MSSBC dated 17.09.2021, 12.04.22 & 13.04.22 are required submit the TENDER SPECIFIC AUTHORIZATION letter from the source on behalf of which they are participating into tender on their (source's) letterhead along with the tender. Non-submission of valid TENDER SPECIFIC AUTHORIZATION letter will make their offer invalid and offer will be summarily rejected. 2. Firms who are RCF sources of the main assembly for RCF Item ID: 2400045 (Switch Boardcabinet for LHB EOG AC coaches), are not required to submit any authorization letter being supplier of Main assembly but Accepted Make Model for tendered item must be as per BOM of RDSO specifications as per Sr. No. 01 of Annexure of RDSO letter No. EL/7.1.108/MSSBC dated 17.09.2021, 12.04.22 & 13.04.22 attached
EMD condition: All bidder who are exempted to submit EMD as per Clause 3.1.1 of Section-I of NWR Tender document, are required to sign Bid Security Declaration as mentioned in clause 3.1.5. Submission of offer by such exempted bidders will be considered that they have signed the above bid security declaration. Bidders who are not exempted to submit EMD and bidders who are under disqualification for EMD exemption, are mandatorily required to submit EMD (online) as mentioned in Tender NIT. (Note: Please refer Para 4 in section-I of NWR tender conditions (SBD) for applicability of MSE benefits).
29 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
INSPECTION CLAUSE : Inspection by TPI against GC/TC/WTC/COC of OEM.
SD Condition: Security deposit will be applicable as Clause 12 of Section-II of NWR tender conditions.
Micro and Small Enterprises firms In order to avail themselves of benefits and preferential treatments, the MSEs must be registered with any of the following: - (a) UDYAM (UDYAM Registration Certificate). (b) Udyog Aadhar Memorandum (Note :- Terminal date for consideration of this certificate was till 30.06.2022 or as extended by Ministry of Micro, Small & Medium Enterprises from time to time. Thus this certificate (Udyog Aadhar Memorandum) can only be considered if the above terminal date is further extended beyond 30.06.2022). MSEs registered with above agency/agencies must attach (in the template - "Attach Documents" on "Techno-Commercial Bid Details form", as scanned copy in PDF format) their current & valid registration certificate along with their offer. Other Conditions shall be as per Para 4 of Section-I of NWR tender condition document.
Tenderer should mention in their offer: - 1. Name of manufacture with complete address. 2. Place of inspection be indicated with complete address, option for inspections at godowns/outstation/multiple places be strictly avoided, and preferably be permitted only at manufacturers place.
Wherever the inspecting authority is specified in the tender documents, tenderers are advised to quote accordingly. Offer with any deviation from INSPECTION CLAUSE mentioned in tender will be SUMMARILY REJECTED.
2 conditions
INSPECTION CLAUSE mentioned in tender is responsive condition.
Conflict of interest: (1) For items for which splitting clause is applicable:- "a) If as per NIT, item(s) is/are being procured from the approved sources appearing in the vendor directory of RDSO or any other nominated source approving authority then the firms declared as sister/allied firms for procurement of tendered item/items in the vendor directory, are considered as Affiliates within the meaning of para 2502 (e) of IRS conditions of contract and only one of the affiliated firms is allowed to submit its competitive bid for a given item. As an exception, the affiliated concerns having different approval status, as Developmental and Approved, in the approved list, shall be allowed to make a separate bid under each status. (b) Irrespective of the fact whether item(s) is/are being procured from the sources, approved by any nominated source approving authority as mentioned in para a) above or otherwise, the bidding firm, by the mere act of participation in the tender, confirms that none of its Affiliates i.e. Allied firm or Authorized agent has submitted the bid for the same item for which it is competing in the tender. However, the exception permitted by the purchaser in para a) shall apply. (c) There will be no bar on competing for different items by different allied firms in a given tender, if inter-se ranking for different items is being made separately as per evaluation criteria. d) Following firms are considered Allied firms for the purpose of para b) and c) above :- (i) The management of one firm is common with other. (ii) Majority interest in the management of both the firms are held by a common set of Partners or Directors. (iii) One firm has Substantial or Majority shares in the other firm. (iv) One firm directly or indirectly controls, or is controlled by or is under common control with the other firm. e) Any suo-moto proactive disclosure by the bidders in terms of para 2503 (a) of IRS conditions of contract, shall not amount to failure of Code of Integrity and in such cases, the most competitive bid within the zone of the consideration, amongst the affiliates, shall be considered for ordering and other bids of affiliates shall be ignored/rejected. Participating firm is fully responsible for compliance of the conditions stipulated in para a) to e) above and in case of any violation, it is liable to a punitive action by the purchaser as mentioned under para 2500 of IRS conditions of the Contract on 'Code of Integrity in Public Procurement; Misdemeanors and Penalties'. " (2) For items for which splitting clause is not applicable:- "No conflict of interest amongst the bidders, as affiliates, within the meaning of para 2502 (e) of IRS conditions of contract, shall be considered in the open tender, if no pre-disclosed splitting of quantity for ordering is stipulated and order is to be placed on lowest eligible bidder. Part quantity ordering due to purchase preference over lowest bidder/developmental orders shall not be considered as splitting within the purview of this para "
3 locations across Rajasthan · 76 Numbers total
DISCONNECTING AND EARTHING DEVICE
40251767A~NWR
40251767A
Open - Indigenous
Goods
Ajmer, Rajasthan
₹0
₹63,490
20 Jan 2026
12 Dec 2025
1 item · 76 Numbers total
DISCONNECTING AND EARTHING DEVICE, 8 POLE, 2-WAY, WITHOUT OFF, ON LOAD 125A, A T 1000V AC, 2NO+2NC, WITH HEAVY HANDLE AND PAD LOCKING ARRANGEMENT IN ONE POSITION, MOU NTED IN STAINLESS STEEL ENCLOSURE, SUITABLE FOR AC-23 DUTY, CONFORMING TO IEC 60947, MAXIMU M DEPTH INCLUDING HANDLE 480MM, AS PER SR. No. 1 AND ITEM CODE-S1, PLACE OF INSTALLATION-S1A 2, OF BILL OF MATERIAL OF RDSO LETTER NO. EL/7.1.108/MSSBC, DATED 17.09.2021, AND CONFORMING TO RDSO SPECIFICATION NO. RDSO/PE/SPEC/AC/0184-2015 (REV-1), RDSO/SPEC/AC/0192-2018 (REV-1), R DSO/SPEC/AC/0200-2020 (REV-0), AND RCF SPECIFICATION NO. EDTS-134 & EDTS-327. ACCEPTED MAKE & CAT No.: L&T Salzer - Part No. 74168SLB32LOGBSS, Schaltbau - Part No. M137.0827407.R1, Technotren dz - Part No. IS81210TT19, KAYCEE (Restricted to 25% Quantity) - Part No. 12580892A34V49XE OR any ot her RDSO approved make. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CARRIAGE STORES DEPOT AJMER, NWR | Rajasthan | 52.00 Numbers |
| DIVISION STORES DEPOT BIKANER, NWR | Rajasthan | 19.00 Numbers |
| SSE/Elect./ACC/JU, NWR | Rajasthan | 5.00 Numbers |
| Total | 76 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5523047.pdf
ATTACHMENT
5608971.pdf
ATTACHMENT
5286836.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .