REPAIR TO SEPTIC TANK SOAKAGE WELL SEWAGE DRAINAGE FOOTHPATH HARD STANDING ETC UNDER AGE BR II FOR CABS STIR AND CEMILAC BANGALORE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Demolition of reinforcement cement concrete in any description and in any position not otherwise specifically provided, (reinforcement cut as required to fecilitate demolition ) below or above ground level.

S&F FRP gratings 120 x 1220 x 38 mm ±5mm FRP Grating including ,cutting of pcc by machine and making good surface - Yellow fixing as per direction of Enge in Charge.

S&F 40 mm FRP Angle - Yellow / Gray - Yellow fixing as per direction of Engr- in- Charge.

S&F FRP gratings 600X600mm ±5mm FRP Manhole cover including frame ,cutting of pcc by machine and making good surface - Yellow ±5mm fixing as per direction of Engr- in- Charge.

S&F FRP gratings 300X300 mm ± 5mm FRP Manhole cover including cutting of pcc by machine and making good surface - Yellow fixing as per direction of Engr- in- Charge.

M&L for pre-cast and laying in position at or near ground level factory made pre-cast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M&L preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Hard core broken stone of gauge n exc 63mm, deposited spread and levelled in layers not exc 20cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base, and similar work complete all as specified and as directed.

M&L for providing precast cover slab in 1:2:4, type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5 m deep for foundation etc for manholes etc not exc 10 sqm on plan and not exc 1.5m depth and getting out in any type of soil complete all as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.

M&L for PCC 1:3:6, type C2, 75 mm thick (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth complete all as specified and as directed.

M&L for desilting and cleaning drain from mud, hard material like stone/brick including thrown out sidemd land etc complete all as directed.

Demolition of brick work, for drain,brick ,concrete or stone boulder masonry built in cement mortar complete .

M&L for pre-cast cement concrete, type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in CM 1:6, complete all as specified and as directed.

M & L for walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

M & L for walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except Stone all as specified but except stone complete

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm complete

M&L for providing PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in surface channels & drains complete all as specified and as directed.

M&L for providing PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel exc 30 cm and n.exc 60 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped ends etc.

M&L cement concrete work in pavement / hard standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.

Finishing surfce of concrete pavements by brooming

Forming only 20 mm thick expansion joints in pavements for thickness of slab 250mm thick or less and filling with pre formed bituminous filler board and top 30mm primed and sealed with with sealing compound grade A complete all as specified and as directed.

Forming only contraction (Dummy joints 65mm deep x 10mm wide and filling with sealing compound.

Demolition and breaking up drain pipes any dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

Material and labour for 200 mm dia Reinforced cement concrete pipe, class NP2 laid in trenches and jointed as specified and as directed by Engineer- in- charge.

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in bed concrete to 200 mm dia drain pipe including packing under haunching againest the sides of pipes after they are laid tested.

Cleaning of septic tank of the following capacity including removal of sludge /sewage water and disposal to outside MD land and covering with layer of earth and sprinkling adequate quantity of lime powder to avoid health hazard complete all as specified and as directed.

(a) 100 users

(b) 200 users

(c) 500 users

Cleaning of manhole chambers including removal of sludge /sewage water and disposal to outside MD land and covering with layer of earth and sprinkling adequate quantity of lime powder to avoid health hazard complete all as specified and as directed.

M&L Welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc.6mm but n.exc 9mm complete.

Dismantling Interlocking Paver as specified and directed.

Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified and as directed.

Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment except tiles.

Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid of any type and cover fillets complete all as specified and directed

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for plain cement concrete 1:2:4, type B1, average thickness 40-70 mm thick (using 20 mm graded stone aggregate) as in flooring/ paving finished rough to receive complete all as specified and as directed.

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15 mm thick stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick cement mortar 1:4 on fair faces of Brick masonry or concrete surface wall even and smooth without using extra cement.(New Brick Work) complete all as specified and as directed.

Supply only Integral waterproofing compound

M&L prepration of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L applying 2 coats of exterior emulsion finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall new plaster surface including cornices, plasters etc by all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).

Dismanling Sructural steel work including door ,gates but excluding framed work.

S & F Mild steel work as in doors or gate of angle Rungs in static tank of other section gusset plate rails ladder & Hand rail and fastenings and heavy bracket framing or flat sections)including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -GW or Grade E-250,quality B complete all as specified and directed by Engineer-in-Charge

M&L preparation of new or previously untreated surfaces & priming with red oxide and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

Disconnecting existing PVC tank of capacity 500 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required and reconnecting and re-fixing in position after cleaning, repair etc complete all as specified and as directed. Cleaning and removing all scale and dirt etc from PVC tank and writting date cleaned on, from mouth of circulating pipes complete all as directed

All as per ser item No 60 above but PVC tank of capacity 1000 ltr.

All as per ser item No 60 above but PVC tank of capacity 2000 ltr.

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick.

S & F sheet glass 3mm thick for window ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion complete all as specified and as directed.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repairs vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and as directed.

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device complete

Supply and fixing in repairs vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) complete all as specified and as directed.

M&L applying one coat of exterior emulsion weather proof paint on wall old surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

SHRI MALLIKARJUN BATTERY AND ELECTRICAL WORKS

M/S SUMEET MADHAV ASNOTIKAR

MARUTI AUTO MOBILE ENGINEERING

VKD CONSTRUCTION

Meghana and Gowda Enterprises

M/S KRISHCON LANDMARK

M/S VERNEKAR AGENCIES

sanjay prabhu