REPAIR TO PLASTER FLOOR TILING AND OTHER ASSOCIATED BR NATURE WORKS UNDER AGE BR I OF GE (W) AGRA

Amount

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing rubbish outside MD land all as specified & as directed.

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc including removing rubbish outside MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including removing rubbish outside MD land complete all as specified and directed.

M&L for rendering 10mm thick plastering on concrete surfaces of wall in CM 1:6, finished the surface even & smooth complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth including using water proofing compound @ 2% by weight of cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying applying two coat of distemper oil emulsion (washable) over a coat of 1mm thick Birla Putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) finished even and fair complete all as specified and directed.

M&L for 40mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in floors, etc finish the surface even & smooth using extra cement complete all as specified and directed.

M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0.06 Sqm but not exc 11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic jointfree tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

M&L for vitrified ceramic light or any shade tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles not exc 0.36 Sqm in floors etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed

M&L for glazed ceramic coloured tiles joint free of size 300 x 200 x 7 mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including 10mm thick rendering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 furrowing the under layer with scracthing tool, applying cement slurry on the under layer @3kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 (1 cement, 1/2 course sand and 2 stone shipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone shippigngs complete all as specified.

M&L in repairs for coloured vitreous China European wash down water closet pan fixing with bolts including connecting to 100mm bore CI ‘P’ or ‘S’ trap with following accessories complete all as specified & as directed:- a) Coloured PVC low level flushing cistern 10 ltrs capacity with inlet valve float complete -01 b) Flush pipe -01 c) PVC connection 600 mm long -01 d) Plastic seat cover coloured -01

S&F in repairs water closet vitreous China squatting pan, Orissa pattern of size 580x440mm, white, complete all as specified and directed

S&F in repairs concealed stop cock, fancy type 15mm bore brass CP with long shank and cup washer complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm outlet dia plain with grating including jointing with solvent cement 100mm dia complete all as specified and directed.

S&F in repairs brass CP Towel rail 20mm dia 60cm long between flanges complete all as specified and directed.

S&F in repairs towel ring of CP brass complete all as specified and directed.

S&F in repairs brass CP toilet paper holder complete all as specified and directed.

S&F in repairs stainless steel Jet spray heavy duty with PVC connection complete all as specified and directed.

S&F in repair PVC flushing cistern 10 Ltrs capacity, low level, white with inlet ball & float valve and handle including brackets complete all as specified and directed.

S&F in repairs 100mm dia PTMT grating (Min weight 25 gms) complete all as specified and directed.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm complete all as specified and directed.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mm complete all as specified and directed.

S&F in repairs PVC (SWR) bends of 110mm radius to PVC SWR pipes including taking out existing bends complete all as specified and directed.

S&F in repairs PVC (SWR) bends of 75 mm radius to PVC SWR pipes including taking out existing bends complete all as specified and directed.

S&F in repairs PTMT stop cock 15 mm bore external threaded complete all as specified and directed.

Taking down 15 mm bore steel tubing and connections including removal to store/ site and making good disturbed portion as required complete all as specified and directed.

Taking down 20 mm bore steel tubing and connections including removal to store/ site and making good disturbed portion as required complete all as specified and directed.

Supply and fixing 15 mm bore tubes medium grade galvanised, with all fitting and fixed to walls and ceilings, roofs or laid in floors complete all as specified and directed.

Refixing old 15 mm bore tubes medium grade galvanised, with all fitting and fixed to walls and ceilings, roofs or laid in floors complete all as specified and directed.

Refixing old 20 mm bore tubes medium grade galvanised, with all fitting and fixed to walls and ceilings, roofs or laid in floors complete all as specified and directed.

Supply and fixing 20 mm bore tubes medium grade galvanised, with all fitting and fixed to walls and ceilings, roofs or laid in floors complete all as specified and directed.

S&F in repairs PVC connections 15mm size, 450mm long with PTMT nuts on both ends complete all as specified & directed.

S&F in repairs 32 mm bore PVC pipe as in waste pipes for sinks & WHBs, complete all as specified and directed.

S&F in repairs 15 mm bore stop valve (external threaded) cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm bore (external threaded) bib taps cast copper alloy cromium plated long body fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specifed and directed.

S&F in repairs 15 mm bore fancy pillar taps copper alloy with capatan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs cast iron nahani trap with grating including jointing to waste pipe in cement Conrete 1:2:4 type B1 (using 20 mm graded stone aggregate) for 75mm bore including CP grating cover with or without hole complete all as specified and as directed.

S&F in repairs shower rose brass chrominium plated 125mm size complete all as specified & as directed.

S&F in reapirs brass CP basin mixer for mixing of hot & Cold water screwed down for iron pipe and fixed to 15 mm pipe as complete all as specifed and directed.

S&F in repairs Vitreous china ware white wash hand basin with pedestal, flat back size 550 x 400mm including waste pipe chain plug bracket and 32mm dia CP coupling and PVC connection complete all as specified & as directed.

S&F in repairs PTMT waste coupling (half/full threaded) fixed with 32mm dia discharge pipe for WHB complete all ass specified and as directed.

S&F in repairs PVC (SWR) junction, double equal or unequal 110mm dia complete all as specified & as directed.

S&F in repairs PTMT bib tap 15 mm bore external threaded complete all as specified & as directed.

HARI BUILDERS

C P Singh and Co

M/s Singh Electric Co

M/s Tomar Builders

Asha Construction

Messars Maa Devi Construction Co.