SPECIAL REPAIR TO TOILET BLOCK NO T 596 T 597 SEWAGE LINE T 597 TO SUMP AT STN HQ SPL REPAIR TO BLDG NO P 669 MES COLONY EM INSTALLATION ADDN ALTN TO BLDG NO P 670 AND CERTAIN MINOR WORKS AT BB CANTT SRINAGAR

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for coloured glazed ceramic tiles on vertical surface as in dado, skirting etc of size 350x250x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L for PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all specified and directed.

Dismantling framed trusses not exceeding 10m span complete all specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains including necessary formwork complete all as specified and as directed.

M&L for PCC (1:3:6), Type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete) jointed in cement mortar and removing from site, complete all as specified and directed.

Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed.

S&F reinforced concrete pipes of 150mm bore class NP-2 with collar laid in trenches and jointed with CM 1:1 complete all as specified and directed.

M&L for concrete in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.

S&F in repair 25mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling old unserviceable water tanks complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each and removing from site complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F butt hinges medium weight 100mm size colled rolled mild steel complete all as specified and directed.

S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S&F in repair of vitreous china squatting pan ‘Orissa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping, benching cills, roof kerb, seismic and other similar bands and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in road side kerb stone of size and shape as approved, set in CM 1:4, including use and waste formwork if required complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4.0sqm each and removing from site complete all as specified and directed.

Taking down shutters n.exc 1.0sqm each and removing from site complete all as specified and directed.

Taking down shutters exc 1.0sqm and n.exc 2.0sqm each and removing from site complete all as specified and directed.

S&F 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) fitted to chowkats complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln easoned and chemically pressure treated complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S & F 200mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc complete all as specified.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.42sqm but not exceeding 1.0sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over and including 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work finished even and smooth witout using extra cement complete all as specified and directed.

S&F 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F 15mm bore Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part -I complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exceeding 200mm thick ( Horizontal or sloping) for rough finished surface complete all as specifed and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specifed and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floors etc. complete all as specified and as directed.

M&L for PCC (1:2:4), Type B-0, using 12.5mm graded crushed stone aggregates, as in coping including necessary form work complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for precast RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4, including necessary formwork complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for Mild steel round bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M & L for walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm of Granite or Trap stone complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, comlete all as specified and directed.

Surface dressing not exceeding 15cm deep and getting out in any type of soil, comlete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth witout using extra cement mixed with and including water proofing compound as per manufacturer's instructions complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work finished even and smooth witout using extra cement mixed with and including water proofing compound as per manufacturer's instructions complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6), Type C-2 (using 40mm graded crushed stone aggregates) as in sub base, levelling course etc complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregates) as in sub base of floor finished even and rough to receive floor finishes complete all as specified and as directed.

S & F vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and PVC 'P' or 'S' trap complete all as specfied and directed.

S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve, float handle, including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 580x400mm excluding tap waste pipe chain and plug but including brackets, 15mm dia CP centre hole mixer and PVC waste pipe complete, all as specified and directed

S&F 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F PVC flexible connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 200mm dia towel ring of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all specified and directed.

S&F CP grating 75/100mm dia with hole complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for RCC (nominal mix) 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregate) as in as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns, basement slabs etc complete all as specified and directed.

M&L for RCC (nominal mix) 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregate) as in as in beams, cantilevers, bressumers lintels over 1.5 m span etc.complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface complete all as specified and directed.

S&F PVC Septic tank suitable for 35 users, having three chambers design and processing the waste through anaerobic process, including excavation of pit of size 3.50mx1.70mx1.80m, level the bed with 250mm thick sand cushioning and fill the side all around the tank with dry sand and compacted and making connection of inlet & outlet to septic tank complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves incl supports, overhangs etc also splays between floors and beams etc in rough finished flat surface of concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles on vertical surface as in dado, skirting etc of size 450X300X6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile fixed over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for coloured Non - skid Ceramic tiles on vertical surface as in dado, skirting etc of size 600mmX600mmX6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile fixed over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old distempered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M & L for preparation of old distempered surfaces of ceiling and applying two coats of oil bound distemper complete all specified and directed.

M&L for 20-25mm thick machine cut kota stone slab, as in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for 20-25mm thick machine cut kota stone slab, as in skirting, dado, steps and pillar etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 10mm thick backing layer in CM 1:4 complete all as specified and as directed.

M&L for PCC 1:7:12 type F-2 (using 40mm graded crushed stone aggregate) as in sunken portion og floor including demoltion of existing cement concrete of sunkeen portion all as specified and directed.

M & L for rendering 12mm thick in CM (1:3) on faces of sunken portion with nerru finish complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainles steel sheet 1.0 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, each bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in replair CP brass soap dish, heavy duty, fixed with chromium plated brass screws, complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling old unserviceable water tanks complete all as specified and directed.

S&F in repair 32mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F PP-R Gate valves 32mm outer dia (brass insert) as per requirement of the site complete all as specified and directed.

S&F PP-R Gate valves 25mm outer dia (brass insert) as per requirement of the site complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

M&L for second class hard-wood in scantlings wrought fixed in frame work complete all as specified.

S&F in repair 6mm thick Plywood, grade BWR, type BB, fixed with screws/nails to timber frame work complete all as specified and directed.

S&F 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 13 but n. exc 25 Sqcm complete all as specified and directed.

S&F in repair plate rack made of stainless steel sheet 1.00mm thick of size 750mmx600mmx300 mm with steel shelves and hanging arrangments for utensil, complete all as specified and directed.

Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing old materials tfrom site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes 1.2 mm thick or PVC flush type box and dully fixed it concealed on wall or surface on wall and providing alongwith modular type back and face top covered plate for housing / mounting of switches sockets, regulators etc and also using /drawind of 1.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as a continuous earth wire which is connected with terminated the box to ceing rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. all as specified and directed for following:-

One light/fan point controlled by one way switch 5 Amp

One 3/5 pin socket outlet, 5 Amps on same board

One 3/5 pin socket outlet, 5 Amps on independent board

One bell point controlled by one way switch 5 Amp

All as per Sl item No.135 above but using single runs of PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) power point wiring system with controlled by one way switch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed

S&F piano switch 5/6 Amps 220 Volts for one way switching system complete as specified and directed.

S&F socket 5/6 Amps 220 Volts, 3/5 pin complete as specified and directed.

S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

S&F piano switch 15/16 Amps 220 Volts for one way switching system complete as specified and directed.

S&F socket 15/16 Amps 220 Volts, 5/6 multi pin type complete as specified and directed.

S&F fan regulator with hum free step type alongwith speed control know of capacity 120 watt 230 Volts, complete all as specified and as directed.

S&F bell push button switch 5/6 Amps 230 Volts complete all as specified and as directed.

S&F bell Ding Dong Type, AC 230 volt, Single Pole complete all as specified and as directed.

S & F wall mounted slim batten type decorative integrated design LED tube light fitting of rating capacity 1 x 20W/ 22W with eletronic driver and fitting extruded body made of aluminum housing with high quality polycarbonate diffuser with long life energy saving and required fitting used in both warm/white type coluor set complete including providing of suitable type of flat fexible two / three core cable for electric connection including taking down old fitting complete all as specified and directed. Make : Philips model No - BN021LED22S 6500K /4000K PSU GR, Havells model No.-LUMILINEPLUSNEOBS22WLED865SPCSSIND & Crompton model No-CCS-100-20-65-HL2-DP-NWH.

S&F ventilating exhaust fan made out of metalic body complete with louvers and shutter operational of size 300mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall compete all as specified and directed.

S & F surface mounted LED bulk head luminaries light fitting of rated capacity 10W out door type with dust and water proof, with PVC housing and unbreakable polycarbonate opal with inbuilt surge protection with IP 65/66 protection rating, energy efficient for ready to use and required in both warm/white type colour fixture complete including dully fixed on bldg wall surface including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Philips & model No - WT202W LED10S Havells model No.HEXAFT10W LED857 SSYMBOPC, Bajaj model No. BIBWP 10W LED

S & F decorative profile wall mounted LED mirror light fitting 20 Watt 6500 K of size 57.5CM long or 2 fit long with aluminium channel environmental friendly energy efficient and long life energy saving and required fitting use in both warm/white type colour set complete set complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & model -LHEXARP7IN1W020 or equivalent specification and model & make of Philips /Crompton

S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x4Sqmm and one run of 1x4 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note:- 3 runs of 4sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.

S&F in replaccement MCB SPN 32 to 40 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

Supply and laying GI pipe 25 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt and washer etc complete all as specified and directed.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

Excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depth for laying of pipe / cable in any type of soft /loose soil and getting out etc complete all as specified and directed.

M&L for Sand cushioning for under ground cable provided with a layers of sand before laying cable and sand after laying and stretching the cable complete all as specified and directed.

M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat acomplete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed.

S & F environmental friendly LED street light fitting of rated capacity 20/25W out door type made out of pressure die cast hosing with glass and high performance polycarbonate optics with LEDs with drives and having IP 65/66 protection and surge to heat resistant sink for better heat dissipation and including to ready for use and required in both warm/white colour type fixture complete set including providing of suitable dia or as recommended by manufacturer GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Philips & model No. BRP029 LED25 CW/WW MR PSU GR DX, Havells Model No.LHEXAYP7PN6K020, Bajaj Model No- ENXT P25L WH PO PC SD

S & F angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of rechargable LED bulb of capacity 9 watt warm/ white colour type complete all as specified and directed .

S&F in replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of distribution board SPN 16 way type 220 volt AC supply system with IP-43 protection system and having mounting channel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed.

Description all as per serial item No. 161 described here-in-before but SPN 12way system

Description all as per serial item No. 161 described here-in-before but SPN 8way system

Description all as per serial item No. 161 described here-in-before but SPN 4way system

S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x6Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note:- 3 runs of 6sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.

Supplying and fixing 1100 volts grade heavy duty twin core flat/ circular cable 16sqmm, PVC insulated multi stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed and making electric connection including taking down of old cable complete all as specified and directed.

Supplying and fixing of rigid non metalic PVC conduit of 15/20mm bore heavy duty with fittings laid in trenches/ fixed to wall with providing clamping arrangement for holding of pipe on wall in proper size of clamps, nut, bolt and washer complete all as specified and directed.

S&F air circulation ventilating fan made out of metalic body complete with louvers and shutter operational of size 200mm sweep suitable to work on 230 Volts 50 Hz fixed on wall with nut, bolt including providing elecctric connection with suitable size copper wire compete all as specified and directed.

S&F ceiling fan 1200mm sweep of single phase 220 volt AC alongwith blade and down rod alongwith flate flexible copper wire for all electrical connection including taking down old ceiling fan and deposited in AGE E/M store yard complete all as specified and directed.

S&F electric water heater storage type steel body with inner copper tank of storage capacity 25 ltr, BEE 5 star rating and providing all connecting accessories and electrical connection including taking down old water heater and deposited in AGE E/M store yard complete all as specified and directed.

S&F in replacement energy saving long life recessed / ceiling concealed mounted flat unique square slim panel integrated design LED luminaire light panel type fitting of size 595 mm x 595 mm or fitting of size 2x2 feet type of rating wattage capacity 36W/40W of supply voltage 220AC decorative type with high performance LEDs and electronic driver with extruded body made of aluminium housing with mounting slot and fully diffused recessed mounted LED luminaire high quality with surge protection energy efficient for ready to use and required in warm/white type colour fixture complete including making suitable type/size of new hole cutting on existing ceiling surface or extra side hole cutting in existing hole for fixing fittings (if required at site) for fixing of light fitting purposed and also providing of suitable type flat flexible three core cable for electric connection purposed complete all as specified and as directed . Make : Philips model No. RC375B LED 36S 865/840 PSU W60L60 52 WH, Havells model No. VENUSNE02X2PLR36WLED865 PRALMOD Crompton model No- CCR-127-36-57-SL-NWH.

S&F in replacement energy saving long life recessed / ceiling concealed mounted down lighter light fitting round/square flat slim shape, decorative type with integrated design LED luminaire light type fitting of rating capacity 15W with electronic driver with extruded body made of aluminium/PC housing and mounting slot, ready to use and required in warm/white type colour fixture complete including making suitable type/size of new hole cutting on existing ceiling surface or extra side hole cutting in existing hole for fixing fittings (if required at site) for fixing of light fitting purposed and also providing of suitable type flat flexible two/three core cable for electric connection purposed complete all as specified and as directed . Make : Philips model No. DN177 15S LEDDL G2 WW/NW/CW, Havells model No. EDGEPRONEORDDLR15WLED865S, Crompton model No- LSCRM-15W-WW

S&F in replacement energy saving long life ceiling slim surface mounted down lighter light fitting round/square flat slim shape, decorative type with integrated design LED luminaire light type fitting of rating capacity 18W LED 6500K and electronic driver with extruded body made of aluminium/PC housing and mounting frame, ready to use and required in warm/white type colour fixture and also providing of suitable type flat flexible two/three core cable for electric connection purposed complete all as specified and as directed . Make : Philips model No. SM296C LED20S (CW/NW/WW), Havells model No. LHEAAHP7IL1W018, Crompton model No- LCDSPLN-R-18-WW

S & F surface mounted decorative wall mounted bracket light fitting with having gold finish fixture with cognac hammered clear glass diffuser suitable for 7.5W LED filament lamp E27 base including providing of 1Nx9W LED lamp/1Nx7.5W LED filament lamp complete light fitting with having bulb holder based adaptor alongwith providing of 01 Nos of 7W/9W LED bulb in required fitting use in both warm/white type colour complete set complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & model -LHFOAJD1TZ1A060 or equivalent specification and model & make of Philips /Crompton

S & F surface mounted LED decorative type angle adjustable spot light / bed side study lamp light fitting with having matt finish for premium aesthetics based of suitable rating capacity 7Watt LED 6500K fixture in required fitting use in both warm/white type colour complete set including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & product code/ model No- LHEEGBPGPH1W007 or equivalent specification & model and make of Philips/Crompton

S & F in replacement sheet metal enclosure duly powder coated with single pole and neutral enclosure with having a two pin and earth plug socket base & metal plug top and having mounting channel and complete with one MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty twin core flat/ circular cable 10sqmm, PVC insulated multi stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed and making electric connection including taking down of old cable complete all as specified and directed.

Supplying and fixing in replaccement 1100 volts grade flexible type round shape, 1.5sqmm 3 core, PVC insulated FRLS, multi stranded copper conductor and making electric connection complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty twin core flat/ circular cable 6sqmm, PVC insulated multi stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed and making electric connection including taking down of old cable complete all as specified and directed.

S&F ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall and fixing compete with nut, bolt etc all as specified and directed.

M/S Tajamul Ah Buchh

M/S ATTAR BUILDERS

M/S Vivek Gupta and Co

M/S SK ATLANTIC ENTERPRISES