Maintenance related to Civil and PH works including miscellaneous civil rectification works at Post Graduate Hostel, Anushaktinagar, Mumbai.

Amount

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling brick bat coba cement based water proofing over roof and chajjas carefully without damaging adjacent structures including lowering and stacking of materials and dispoal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm

DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tiles above 25mm and up to 40mm.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area 3.00 Sq.M and below.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area beyond 3.00 Sq.M.

DISMANTLING cement asbestos, Celotax or other hard board ceiling or partiton walls ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

Dismantling steel work / SS work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead

DISMANTLING C.I. / PVC pipes INCLUDING ITS ACCESSORIES IN SHAFTS / OPEN PIPING for following Dia including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200m as per direction of Engineer-in-Charge.

75mm dia CI pipe

100mm dia CI pipe

150mm dia CI pipe

Dismantling PVC or Asbestos rain water pipe of all diameter with fittings and clamps including the serviceable materials within 100 m lead as directed by the Engineer-in-charge

DISMANTLING G.I. PIPES OF ALL DIAMETER EXTERNAL WORK including excavation and refilling trenches after taking out pipes manually/ by mechanical means including stacking of pipes within 100m lead as per direction of Engineer-in-charge. Note: measurement shall be considered as centre line measurements of pipes of all dia. including fittings & fixtutes & no extra payment shall be made for the attached fittings & fixtures.

Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for post Anti-termite treatment to existing buildings as per manufacturers specifications and as directed by the Engineer-in-Charge. Work to be executed by approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer. Payment will be cleared only after submission of guarantee.

LEAD CHARGES FOR LEAD OF DEBRIS by mechanical transport including loading, unloading, stacking / levelling etc. Notes : 1. The rates are applicable for NET Quantities arrived after making deduction for voids @ 30% from corresponding TRUCK Measurement. 2. Finding authorised ground for disposing debries, transporting of debries at disposal ground, disposing, stacking, leveling & statutory charges if any will be responsibility of the Contractor and no extra charges shall be paid for the same. The debris from identified area shall be cleared every week after accumulation of minimum one Truck Load.

Debris Beyond 4 Km but up to and including 5 Km.

Debris Beyond 5 Km for every 1KM or part thereof

Supplying, stacking and laying of 230 / 150 mm THICK RUBBLE SOLING STONES as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge.

Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.

Providing and laying in position REINFORCED CEMENT CONCRETE (RCC) OF GRADE M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or superplasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc.complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications and as directed by the Engineer-in-charge.

Providing, centering, shuttering FORM WORK USING PVC FILM FACED PLYWOOD to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc. and de-shuttering the same after the specified time all as per drawings and specifications at all levels and as directed by the Engineer-in-charge. For Super Structure

Providing and fixing in position 25 mm thick Joint filler board of approved make in expansion joints to the required size and shape, placing and keeping in position complete as per specifications and drawings and as directed by the Engineer in charge.

Providing and sealing the Expansion Joints with Gungrade Polysulphide sealant suitable for RCC Construction Joints by removing the expansion joint board up to 25 mm deep and cleaning the suface neatly and filling Gungrade sealent up to 25 mm deep to the lines and levels complete all as per manufacturers specifications and as directed by the project engineer. For 50 mm wide expansion Joints.

Providing REINFORCEMENT FOR REINFORCED CEMENT CONCRETE at all levels including supplying, preparation of bar bending schedules,cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Steel Supplied by the Contractor. Using TMT bars of specified grade all dia bars to be supplied by the contractor confirming to IS:1786 only.

Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge---Using 100% SFMC

Providing and injecting approved non cementitious grout in proportion recommended by the manufacturer into cracks/holes/gaps/honey-comb area of concrete of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. Note: The measurement will be made on the basis of actual weight of approved grout powder utilized for grouting.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials of confirming to IS:2062 only. All test reports to be provided along with the supply of the materials. 'Notes : '(1) Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. '(2) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (3) Edges of plates shall be grinded to uniform smooth finish. '(4) Full length welding shall be carried out as directed by the EIC.

Providing STRUCTURAL STEEL WORK USING ANGLES, CHANNELS, JOISTS AND OTHER SECTIONS, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Project Engineer. Up to and including 300mm Joists, 350mm channels, and below sections Using materials of confirming to IS:2062 only. All test reports to be provided along with the supply of the materials.'Notes : '(1) Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. '(2) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (3) Edges of plates shall be grinded to uniform smooth finish. '(4) Full length welding shall be carried out as directed by the EIC.

Providing and fixing 304 GRADE STAINLESS STEEL WORK for Open drain/ Drain grating / Nhani trap/Jali/hand rail in pipe section grill etc of approved size and make and quality by welding, mirror / matt polishing , fixing at site etc. for kitchen floor drain/balcony railing & staircases railing including special sections as per drawings, specifications. complete. A sample to be fabricated and to be got approved by the Architect/ Project Engineer before starting of work at site . This work to be executed through approved specialized agency.

Providing and fixing Anchor fastner HST stud type including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings and as directed by EIC. HST stud type M-12X115 mm long

Making the OPENING IN BRICK MASONRY FOR DOOR / WINDOW / CLEAR STORY OPENING including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/ rubbish to the nearest dumping ground.

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

STRUCTURAL REPAIRS WORKS WITH PRE-PACKED DUAL SHRINKAGE CONTROLLED (volume stable in wet & hardened state), single-component ready-to-use, structural grade high build, alkali-resistant, fibre reinforced, thixotropic polymer modified repair mortar having excellent bond strength to old damaged concrete structures / surfaces by the following process: 1) Removal of loose/spalled or damaged concrete by chipping and cleaning the concrete surface to open up to 20mm behind the reinforcement steel with wire brush and with clean water including removal of dirt, paint, wax, oil, grease, laitance, foreign substances, etc. Mechanically profile and prepare concrete surfaces by abrasive blasting, water jetting or other engineer approved methods. 2) Cleaning the rebars with Acetone for complete rust removal and washing with water to make the surface clean. Ensure that the concrete substrate and ambient temperatures are between (10°C and 35°C) before application. 3) Applying protective coat / bond coat using Styrene Butadiene Rubber (SBR) polymer and cement in the proportion of 1: 1 (1 part of polymer : 1 parts of cement). 4) Mixing full 25 Kg bag with clean potable water in water to product ratio of 0.12 to 0.18), mixed by heavy-duty slow speed (300 to 600 rpm) drill with spiral mixing paddle or forced action pan mixer pan for 3 minutes to achieve uniform lump free mortar consistency. 5) Applying polymer modified mortar with trowel & float. The polymer modified mortar shall have the following properties/technical parameters: (A) Properties / technical parameters of pre-packed Polymer Modified Mortar: i) Compressive strength 1 day: Min. 20 MPa (as per BS:6319 : Part 2) ii) Compressive strength 7 days: Min. 35 MPa (as per BS:6319 : Part 2) iii) Compressive strength 28 days: Min. 45 MPa (as per BS:6319 : Part 2) iv) Flexural strength in 28 days: Min. 7 Mpa (as per BS:6319 : Part 3) v) Tensile strength in 28 days: Min. 2.5 MPa (as per BS:6319 : Part 7) vi) Bond strength: Min. 5 MPa (as per ASTM : C881) vii) Water permeability: less than 1% (as per ASTM : C881) viii) Drying shrinkage in 28 days: less than 1000 microstrain (as per ASTM C 157-93) ix) Potential Alkali Reactivity - : <0.1% Expansion % (ASTM C1260) (B) Properties / technical parameters of SBR polymer bond coat material: i) Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards ii) Total solids % by mass at 105°C: 38 + 1 iii) pH value: 7.5 to 9.5 iv) Specific gravity at 27.5°C: 1 to 1.05 v) Coverage: 4.2 - 4.5 sq.m/kg per coat.

Providing & storing at stores Styrene Butadiene Rubber (SBR) polymer for repairing work confirming to relevant IS specification all complete as per specification and as directed by Engineer-in-charge.

Providing and fixing DOUBLE TUBULAR SCAFFOLDING SYSTEM using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured)

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete. all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing 20 mm thick water proof plastering in cement mortar 1:3 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed at site.

Providing and fixing 1st quality CERAMIC GLAZED WALL TILES conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality CERAMIC GLAZED FLOOR TILES of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge.

Providing and fixing GLAZED VITRIFIED FLOOR TILES of size 600 X 600 mm in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Add Extra for polymer mortar in place of cement mortar

CUDDAPAH STONE SLAB OVER KITCHEN PLATFORM etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete.

Providing and fixing Minimum 15 to 17 mm thick gang saw cut mirror polished (Premoulded and Prepolished) machine cut GRANITE OF TELEPHONE BLACK COLOUR FOR KITCHEN PLATFORMS, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Extra for providing EDGE MOULDING 15mm to 17mm THICK MARBLE STONE / GRANITE SLAB counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge. Granite work

LABOUR CHARGES ONLY FOR RETRIEVING WOODEN DOOR SHUTTERS FROM FRAMES (Chowkhat) of various sizes, modifying, taking out damaged ply from the doors, replacing/bonding 3mm thick marine ply with suitable synthetic resin, plywood, including cost of fevicol, synthetic resin, tools, tackles, nails, screws etc. all complete and refixing the same after complete repairs, re-sizing & refixing fittings, fixtures such as tower bolts, aldrop, door handle, baby latch, mortice locks, night latch, hinges etc. (shall be paid separately under relivent item of this tender schedule ) etc. all complete for shutters including minor repairs to chowkhats, architraves, etc. as per site conditions and as directed.

Door frames with shutter of sizes up to 3 Sqm.(Single shutter)

Door frames with shutter of sizes above 3 Sqm.(Double shutter)

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge- 2nd class Teakwood

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Extra over flush door shutters making rebate for double leaf shutters of all sizes, thickness and finishes complete as per the drawings

Providing LOUVERED OPENING IN DOOR SHUTTERS including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work & beading & applying one coat of approved wood primer etc. complete.

Providing VISION PANEL in all type of flush door including fixing 4 mm Clear Glass with necessary teak wood Beadings complete all as per specifications and as per Drawings.

Providing and suppplying SOLID PVC INTEGRAL FOAM SHEET of white colour or as directed by Engineer-in-Charge. Made out of Integral Foam Sheet as per direction of EIC. The sheet should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

8mm thick PVC Integral sheet

12mm thick PVC Integral sheet

18mm thick PVC Integral sheet

25mm thick PVC Integral sheet

Providing and Supplying in stores PVC Louvers suitable for fixing in Solid PVC Integral Sheet Doors of white colour as directed by Engineer-in-Charge.

REPAIRING AND REFIXING IN POSITION THE EXISTING DAMAGED HYDRAULIC DOOR CLOSER (heavy duty No.3) involving following operations: i) Complete dismantling including removal of clamp bolt, main arm, top nut, ratchet, notch plate, removal of split oil, brass regulatory screws, spring etc. ii) Providing and fixing (Confirming to I.S.35640) bottle type door closer spring for heavy duty door closer No. 3 brass regulatory spring No.1 Part No.1 machine oil (approx. 100 ml.) etc. Note.:- 1) The door closer repaired and spares replaced are to be handed over to Maintenance Unit for accounts. 2) The Agency may inspect the condition of door closers in premises prior to quoting. 3) The repairing and spares replacement shall stand for guarantee of six months trouble free operation with replacement of spares if any, defect occurs the same shall be attended by the Contractor.

Providing & supplying in stores DOOR CLOSER with standard lever arm, necessary screws etc. at site as per direction of Engineer In Charge.

Providing and supplying in stores ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES at site as per directionn of EIC

Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing STAINLESS STEEL ALDROPS OF SIZE 300mm X 14mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.

ONLY REPAIRING OF LOCK of mortise / Knight / Neki or alumunim door lock, including removal & refixing of locks with proper as per existing.

Providing and supplying in stores 4 LEVER MORTICE LOCK / cylinder lock of approved make suitable for aluminium sections

Providing and supplying in stores of 6 LEVERS MORTICE LATCH AND LOCK of approved make and a pair of handles Inside opening Left / Right side.

Providing and fixing approved make 7 Lever Night latch including necessary screws etc in wooden doors complete all as directed at site .

Providing and supplying in stores ANODISED ALUMINIUM BABY LATCH of size 75 X 12 mm ISI marked

Providing and supplying in stores ALUMINIUM HANGING HEAVY QUALITY FLOOR DOOR STOPPER ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and supplying in stores STAINLESS STEEL-304 D-HANDLES (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm with necessary screws.

Providing and fixing WATER PROOF MARINE PLY including cost of screws, washers etc complete providing and fixing hard wood leaping around board in walls etc. as directed by Engineer in charge.

By using 8 mm thick water proof marine ply.

By using 12 mm thick water proof marine ply.

By using 19 mm thick water proof marine ply.

Providing and fixing cement bonded particle board of approved make or approved equivalent with washer, flange type screws etc. for claddings / flooring over existing frame work, as per manufacturers specification and directed of Engineer-in-charge. For 12mm thick cement board for partition & false ceiling. Note : Aluminium required for framework & joint covering will be measured separatly and paid under relavant Item of this schedule. Only actual covered area of the cement bonded particle board will be measured and paid under this item.

Providing and fixing DECORATIVE HIGH PRESSURE 1.0mm THICK LAMINATED SHEET OF PLAIN / WOOD GRAIN in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by Engineer-in-Charge.

Supplying, Providing and fixing BEADING (ARCHITRAVE) of size 50mm to 65mm wide and 12 mm thick using 2nd class teak wood/water proof marine ply around the door frames with necessary screws and fixing laminated sheet on top etc. complete as directed by the Project Engineer.

Providing, supplying and fixing VENETIAN VERTICAL BLINDS / rolling type with all accessories and fabricating to required sizes etc as per approved design and approved Fabric complete all as directed by the Project Engineer.

Providing and fixing 25 mm S.S. CURTAIN RODS of 1.25mm thick with two SS / Brass brackets fixed with SS / Brass screws and wooden plugs etc.wherever necessary complete.

Providing, supplying & fixing of S.S. MESH (MOSQUITO NET) 0.50MM THICK - LESS THAN 1.0 SQ. MM APERTURE in aluminium grill / frame including cost of all accessories and fabricating to required sizes etc complete all as directed by the Engineer-in-Charge. Note : Alumunium Grill will be paid separately under relevant item.

Providing, supplying and fixing G.I. SQARE MESH OF 3MM THICK & LESS THAN 1.0 SQ. INCH APERTURE FITTED ON MS FRAME including cost of welding and fabricating into required sizes etc. complete as directed by the Engineer-in-Charge. Note : MS Frame Work will be paid separately under relevant item.

RESIZING OF EXISTING ALUMINIUM DOOR SHUTTER 1. Existing aluminium framed swing doors shall make floor touch free (to increase bottom clearance) by resizing it. 2. The job is involved of dismantling existing shutter totally including accessories/fittings; cutting of aluminium section as required; reassembling. 3. Existing damaged/not reusable aluminium sections shall be replaced with new ones and the same will be measured under concerned items. 4. Providing and fixing of m.s. tie rods having suitable nut/bolts system at both ends of shutter if need. 5. Reshaping and re-fixing of existing board panel/glass sheets as required; 6. Re-erecting and repositioning the shutter as earlier. 7. Re-fixing of all fittings such as pull/push handle; hydraulic door closer; hinges; locking arrangement; tower bolts; 8. Replacing the existing damaged rubber gasket lining and aluminium clips with new ones 9. The contractor shall be provided the sundry materials such as rubber gaskets; screws, ms tie rods, etc and no extra payment will be made for these. 10. If glass panels are broken during handling, the contractor shall replace the same at no extra cost. 11. Measurements: Each shutter a size of 900 mm x 2100 mm will be measured as one job.

ALUMINIUM WORK FOR DOORS, WINDOWS, VENTILATORS & PARTITION with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. Note : Fittings glazing and panelling shall be paid for separately.

Providing and fixing Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for COLOUR ANODIZING / DYED ANODIZING

Providing and fixing GLAZING IN ALUMINIUM DOORS, WINDOW, VENTILATOR shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge (Cost of snap beading shall be paid in basic item)

With Frosted Glass panes of 5.00 mm thickness

With clear float glass panes of 4.0 mm thickness

With Clear Float Glass panes of 5.00 mm thickness

With clear float glass panes of 8.00 mm thickness

Providing and fixing Approved Quality STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters

Providing & and supplying in stores of STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters as applicable as approved by Engineer-in-Charge.

Providing and fixing Approved Quality and shape LOCKS cum Handle of approved equivalent make for Sliding shutters.

Providing & and supplying in stores of LOCKS cum Handle for Sliding shutters as approved by Engineer-in-Charge.

Providing and fixing DOUBLE ACTION HYDRAULIC FLOOR SPRING of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing & and supplying in stores of DOUBLE ACTION HYDRAULIC FLOOR SPRING of approved brand and manufacturer (conforming to relevant Indian Standard) for doors as approved by Engineer-in-Charge.

Providing and fixing durable heavy duty multipurpose furniture drawer lock of 40mm x 40mm for 22mm panel thickness with atleast two keys, with SS screws complete as per direction of Engineer-in-Charge.

Providing and fixing durable heavy duty brass wardrobe lock of size 25mm, cabinet with nickel plated finish, with atleast two keys, with SS screws complete as per direction of Engineer-in-Charge.

Cleaning the horizontal and vertical surface, chasing and opening the construction joints, cracks, honeycombing area and grouting the surface with low viscosity liquid Epoxy Grout as per manufacturer's specification including cost of all types of required tools, tackles, machinery etc.and cleaning the floor surface with required thinner & oils etc. all complete as per direction of Engineer-in-charge.

Providng and fixing Aluminium Grill in natural Silver anodising of min 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. -Aluminium Grill 10 mm thick

Extra for providing ALUMINIUM GRILL 10mm THICK WITH COLOUR ANODISED by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

FILLING THE GAP WITH SILICON SEALANT between aluminium frame & adjacent RCC / Brick work / Stone work over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width.

Providing and fixing in position SUSPENDED FALSE CEILING SYSTEM / PARTITION SYSTEM USING CALCIUM SILICATE BOARDS 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment)

8mm THICK CALCIUM SILICATE BOARDS

12mm THICK CALCIUM SILICATE BOARDS

Providing and Fixing ALUMINIUM CELL CEILING of approved colour consisting of Main runner, Upper sections, Lower sections all of U- Shaped Profiles 10 mm wide x 50 mm deep x 0.50 mm thick with inwardly returned edges of 2.50 mm. Coil coated on a Continuous paint line, Diuble baked and Roll formed from enamelled corrosion resistance Aluminium alloy (Al. Mg. alloy) for higher strength andRoll forming characteristics.The main runner shall be fixed at a distance of 1.20 metres centre to centre and shall be suspended by means of G.I Suspension Rod 4mm diameter and a galvanised suspension spring clip at a distance of 1.20 metres centre to centre. The cross - Runner shall be fixed to the Main Runner at a distance 0.60 mts c/c. with a self locking device. The Upper Section and Lower section shall be fixed to main runner and cross Runner in form of a Cell Structure of module 100 mm X 100 mm with self Locking device. Grid system for fixing ceiling tiles shall comprise of TEEs. The 24mm main Tee runers shall be suspended at an interval of 1200mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600mm centre to centre and further supported with 24mm cross Tee with interlocking arrangements to form a Grid of 600mm x 600m. The main TEE shall be supported by means of 4mm G.I.Rod from slab / Roof. The suspension shall be provided at 1200 to 1500mm centre to centre.provision for Lights, Diffusers Etc to be made including extra supports wherever necessary. A Non - Woven felt made of glass reinforced fibre glued oner the Perforation for Sound absorbtion Measurements shall be as per actual area of False ceiling with out deductions for lights and diffusers. Measurements shall be area covered by the Cell False ceiling .

Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge

Providing and fixing single point lock cum handle for aluminium openable windows / top hung shutters complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing heavy duty stainless steel 3 section telescopic full extension ball bearing drawer slide of size 20", load capacity 45kg all as directed by Engineer-in-charge.

Providing and fixing fancy Stainless Steel/Brass D-handle for cabinet/drawer with satin finish with 100/150 mm long with SS screws etc. complete as per direction of Engineer-in-Charge.

100mm long D-handle

150mm long D-handle

Providing and fixing heavy duty stainless steel soft close 4-hole full overlay cabinet hinges with stainless steel screws etc. complete as directed by the Engineer-in-charge.

Providing and fixing heavy duty Stainless steel cloth hanger consisting of 6 hooks all as directed by Engineer-in-charge.

Supplying and fixing of pad lock of 6 Lever with 3 nos keys as directed by the Engineer-in-charge.

Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approvred surface design and edge profile placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mm shall be inserted to form a grid size of 600 x 600 mm resting on the perifery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness. The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of matal dash fastners of 6mmx50mm, soffit clits of 25mm x 35 x 1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m. (Only calcium silicate false ceiling area will be measured for the purpose of payment)

REPAIRING OF BIBS TAP / PILLAR TAP / STOP COCK etc. by changing with the spindle, new washers etc. as per site requirement & directed by Engineer-In-Charge.

Providing and fixing Heavy quality FLEXIBLE PVC WASTE PIPE of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge. 32 mm dia flexible PVC (semi-rigid) waste pipe with suitable length..

Providing and fixing required type FLUSH HANDLES for Flushing Cistern.

Providing and fixing WASHERS of Flushing Cistern of OWC / EWC / URINAL etc.

Providing and fixing required type SYPHON SET for Flushing Cistern.

Providing and supplying in stores of CP BRASS / COPPER INLET CONNECTION pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long as approved by Engineer-in-Charge.

Providing and supplying in stores of 15mm PVC INLET CONNECTION SUITABLE FOR HOT AND COLD WATER 300 mm long with nuts and washers complete for wash basins/ Urinals etc. as approved by Engineer-in-Charge.

Providing and supplying in stores of STAINLESS STEEL / C.P. BRASS GRATING of approved equvalent make as specified for floor traps / nahani traps as approved by Engineer-in-Charge.

Supplying of 150 X150mm SOAP DISH of white viterious Chinaware as approved by Engineer-in-Charge.

Supplying of 150 X150mm Stainless Steel SOAP DISH as approved by Engineer-in-Charge.

Providing and supplying in stores of C.P. BRASS TOWEL RAIL 600 mm long at site as approved by Engineer-in-Charge.

Providing and supplying C P Brass / SS towel ring 150 to 200 mm dia with CP Brass / SS bracket as per direction of Engineer In Charge.

Providing and supplying in stores of CP brass 100mm DIA SHOWER ROSE WITH SHOWER ARM as approved by Engineer-in-Charge.

Providing and supplying in stores of 15 mm n.b C.P. BRASS OPEN STOP COCK as applicable as approved by Engineer-in-Charge.

Providing and fixing 15 mm dia C.P. BRASS BIB COCK of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia bib cock of approved type and make .

15 mm Dia LONG BODY bib cock of approved type and make

Providing and supplying of 15 mm n.b C.P. BRASS BIB COCK as applicable and approved by Engineer-in-Charge.

Providing and supplying of 15mm C.P. BRASS 2 IN 1 BIB COCK AND ANGLE COCK as approved by Engineer-in-Charge.

Providing and fixing LIQUID SOAP DISPENSER sensor based complete in all respect as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 15mm C.P. BRASS SWAN NECK PILLAR COCK of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Heavy Quality C.P brass sink cock (table mounted model) of approved make as per specifications and as directed by the Engineer-in-charge.

Providing, Supplying & Fixing of FOOT OPERATED PILLAR TAP OR VALVE with Brass Spout including a pair of 3 feet PVC connections and cost of all accessories etc. complete as directed by the Engineer-in-Charge.

Providing and fixing Heavy Quality 15 mm n.b CP Brass 3 in 1 bath mixer with polished finish, to control flow of hot and cold water, with provision for over head shower, with 115mm long bend pipe and flange of approved make and type and as directed by the Engineer-in-charge.

Providing and supplying in stores of CP Brass HEALTH FAUCET with 1.50 metres long flexible hose as applicable and approved by Engineer-in-Charge.

Providing and supplying in stores of TOILET PAPER HOLDER of recessed type applicable as approved by Engineer-in-Charge.

Providing and supplying in stores of heavy quality CP BRASS BOTTLE TRAP 31 / 32 mm as applicable and approved by Engineer-in-Charge.

Providing & supplying of C.P. BRASS WASTE COUPLING of approved make as approved by Engineer-in-Charge.

Providing and fixing BRASS BALL COCK heavy quality of following sizes with arm rod and Plastic Ball floats complete as per specifications and as directed by the Project Engineer.

20 mm dia.

50 mm dia

Providing and fixing VITERIOUS CHINA WASH BASIN of approved make and colour with C.I. brackets, 15mm C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. White vitreous China wash basin size 630 x 450 mm and equivalent sizes with single 15mm C.P. brass pillar tap.

Providing and supplying in stores of VITERIOUS CHINA WASH BASIN of approved make as applicable and approved by Engineer-in-Charge.

Providing and fixing satin finish STAINLESS STEEL AISI 304 (18/8) KITCHEN SINK of size 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

Providing and supplying of STAINLESS STEEL AISI 304 (18/8) KITCHEN SINK as applicable and approved by Engineer-in-Charge.

Providing and fixing stainless steel AISI 304 (18/8) satin finish kitchen sink with drain board with over all size of 1145 x 510 mm and bowl size of 560 x 410 mm and 241 mm depth of approved make and model with C.I. brackets and stainless steel waste coupling, fittings, including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried.complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing INDIAN WATER CLOSET (ORISSA PAN) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and supplying in stores of INDIAN WATER CLOSET (ORISSA PAN) of approved make as applicable and approved by Engineer-in-Charge.

Providing and fixing white VITREOUS CHINA EUROPEAN TYPE WATER CLOSET floor / wall mounted with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and supplying of VITREOUS CHINA EUROPEAN TYPE WATER CLOSET floor / wall mounted as applicable and approved by Engineer-in-Charge.

Providing and fixing white VITREOUS CHINA FLAT BACK HALF STALL URINAL size 580 x 380 x 350 mm / 610 mm with 15 mm C.P. Brass Auto Shut Urinal Flush Cock , with CP Brass flush pipe unions, Heavy Quality C.P. brass Spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed at site.

Providing and supplying in stores of VITREOUS CHINA FLAT BACK HALF STALL URINAL size 580 x 380 x 350 mm / 610 mm as applicable and approved by Engineer-in-Charge.

Providing and supplying in stores of 15 mm C.P. BRASS PRESSTOMATIC SERIES AUTO SHUT URINAL FLUSH COCK as applicable and approved by Engineer-in-Charge.

Providing and supplying in stores of 15mm C.P. BRASS URINAL SPREADER at site as applicable and approved by Engineer-in-Charge.

Providing and fixing PVC LOW LEVEL / HIGH LEVEL FLUSHING CISTERN 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and supplying in stores of PVC LOW LEVEL / HIGH LEVEL FLUSHING CISTERN 10 litre capacity of approved make as applicable and approved by Engineer-in-Charge.

Providing and supplying PVC NAHANI TRAP / FLOOR TRAP of 100 mm inlet and 75 mm outlet, complete as directed by the Engineer-in-charge.

Providing and fixing 6mm THICK MIRRORS of size 600mm X 450mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Extra over for providing and fixing approved make STAINLESS STEEL 304 GRADE STUDS (with wall spacers) for mirrors etc. complete all as per specifications and as directed by the Enginner-in-charge

Providing and supplying in stores of SOLID PLASTIC SEAT of approved make as applicable and approved by Engineer-in-Charge.

Making connection of distribution branch with G.I main of 25 to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge

Making connection of distribution branch with G.I main of 50 to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge

Providing, laying, jointing, fixing and testing heavy quality (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydraulic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.

15 mm n.b. G.I pipe

20 mm n.b. G.I pipe

25 mm n.b. G.I pipe

32 mm n.b. G.I pipe

40 mm n.b. G.I pipe

50 mm n.b. G.I pipe

Providing and fixing CHLORINATED PVC (CPVC) PIPES having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-Charge..

15 mm outer dia CPVC pipe (External) / open

20 mm outer dia CPVC pipe (External) / open

25 mm outer dia CPVC pipe (External) / open

32 mm outer dia CPVC pipe (External) / open

40 mm outer dia CPVC pipe (External) / open

50 mm outer dia CPVC pipe (External) / open

Providing & fixing in position CPVC ball valve with quarter turn handle, including testing for minimum pressure rating with clean and potable water, jointing with CPVC Solvent cement & other guidelines, as per IS 15778 and as directed by the Engineer-in-Charge.

Providing and fixing unplasticized PVC (UPVC) PIPES (Sch 80 pressure rating) conforming to IS 4985:2000 & installation as per IS 7634 (Part 1) with fittings & solvents (as per IS 10124 / IS 7834) and as directed by the Engineer-in-Charge.

Supplying and providing stainless steel tubular glass door handle bar H shape (or) C shape(one of two sides) 600mm long 32mm diameter complete as directed by the Engineer-in-charge.

Supplying and providing stainless steel round patch lock suitable for 10-12mm toughened glass single or double- door, complete with strike/keeper, cover plates, gaskets, keys, and accessories, as directed by the Engineer-in-charge.

Supplying and providing Optical wide-angle door viewer (peep viewer) suitable for 32–38 mm door thickness, body made of brass/zinc alloy/stainless steel, 160°–200° viewing angle, conforming to general hardware standards like IS 362, complete as directed by the Engineer-in-charge.

Providing & fixing in position heavy pattern screw down GUN METAL GATE VALVE with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-Charge.

Providing and fixing PVC RAIN WATER PIPES conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge.

SWR PIPE 90 mm O/D

SWR PIPE 110 mm O/D

SWR PIPE 160 mm O/D

Providing WHITE WASHING with ready mix lime powder of approved make to give an even shade (Three coats), including scaffolding as per specifications and as directed by the Engineer-incharge.

Providing POLISHING ON WOOD WORK with ready made wax polish of approved brand and manufacturer all as per specifications to required finish and as directed by the Engineer -in-charge complete.

Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats of SYNTHETIC ENAMEL PAINT on steel surfaces of approved brand and manufacture to give an even shade with primer coat including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing, applying wall painting two coats on old work with premium PLASTIC EMULSION PAINT of approved brand to give an even shade with a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and painting walls with (TWO coats) of approved shade of high build protective, elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in-charge.

Providing and painting, finishing with antifungal paint using paint with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineer-in-charge

TESTING OF WATER SAMPLE periodically after cleaning the tanks for “Potable Water Quality & Bacteriological Contamination (IS:10500)” as directed by the EIC.

Chemical Test Parameters

Bacteriological Test Parameters

Opening of nahani trap, removing nahani trap jalli, CLEANING THE COMPLETE NAHANI TRAP / FLOOR TRAP and refixing the same with white cement etc. as directed by Engineer in charge.

LABOUR CHARGES ONLY FOR THOROUGHLY CLEANING AND REMOVING DUST PARTICLES, OILING THE HINGED PORTION / PARTS FOR SERVICEABLE CONDITION OF ALUMINUM / M.S / WOODEN DOORS, WINDOWS, COLLAPSIBLE GATES, M.S HEAVY GATES including cleaning of glaas panels, removing the existing dust from trackc by blower, cleaning the fittings & fixtures before greasing, applying approved greese, oil etc. complete all as directed by Enginee-in-Charge. Note: Quantity of work considered for 1 Operation comprises of entire P G Hostel complex.

REMOVING AND RELAYING 60mm THICK CEMENT CONCRETE INTERLOCKING PAVER BLOCK with 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge

PROVIDING AND LAYING 60mm THICK FACTORY MADE CEMENT CONCRETE INTERLOCKING PAVER BLOCK OF M-30 grade made with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. Including removing old paver blocks, disposing the same outside the colony. all complete as -per the direction of the Engineer-in-charge

Providng and fixing at or near ground level PRECAST CEMENT CONCRETE 1:2:4 IN KERBS, Using 100% manufactured sand, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using coarse sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using fine sand) on exposed surfaces complete as per specifications.

Providing and Fixing SENSOMATIC BASIN MOUNTED PILLAR COCK with Electric Operated / AC Battery Operated infrared sensor having water inlet from bottom side, including fixing to wall with suitable brackets, accessories etc. all as per manufacturers specifications and direction of Engineer-in-charge.

Providing and Fixing SENSOMATIC URINAL FLUSHER TO EXISTING URINALS with Electric Operated / AC Battery Operated infrared sensor having water inlet from back side, including fixing to wall with suitable brackets, accessories etc. all as per manufacturers specifications and direction of Engineer-in-charge.

REPAIRING OF SENSOMATIC PILLAR COCK and URINAL FLUSHER etc. by changing with Set of 4 Nos. 1.5V AA battery / solinoid valve / sensor / baterry holder / casin box etc. as required as per site requirement & directed by Engineer-In-Charge.

Replacement of One unit Each (set of 4 Nos. )1.5V AA battery

Replacement of Sensor for EU-02-P

Replacement of Solenoid Valve for EU-02-P

Replacement of Battery Box for EU-02-P

Replacement of Sensor for ET-01-BE

Replacement of Clamp Set for ET-01-BE

Replacement of Spring Washer for ET-01-BE

Replacement of Electrical Adopter for ET-01-BE

Replacement of Control Box for ET-01-BE

Providing, laying, FIXING WITH WELD-JOINTING AND TESTING HEAVY QUALITY (ISI MARKED C-CLASS) GALVANISED IRON PIPES AND ISI MARKED FITTINGS like, tees, elbows, bends, unions, nipples, reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg/Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting, threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C'-Class heavy quality pipes of approved make.

Fabricating and jointing pipes / plates / frames etc. by BUTT WELD for pipe to pipe, pipe to plate or any kind of jointing of MS works.

Providing and fixing 304 GRADE STAINLESS STEEL ROOM NO. PLATE of size 100mm x 40mm of matt polishing, grooving the Room / door No. and Border on Plate as approved by Engineer-in-Charge and fixing with SS Screw at site etc.

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc. with TOUGHENED FLOAT GLASS PANES with PVC / Neoprene gasket, supports etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With toughened float glass panes of 6.00mm thickness

With toughened float glass panes of 12.00mm thickness

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1) Each Job shall be carried out by one qualified Degree holder Civil Engineer with 2 (Two) years experience or Diploma holder with 5 (Five) years experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University / Autonomous Govt. / Govt. recognized recognized Polytechnic/ Institute. (2) Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Engineer will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Engineer exclusively for the particular job. (5) Engineer should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Engineer will report to BARC Engineer/ EIC. (6) The minimum notice period before change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1580/- per day of shortfall in notice period will be levied on the contractor.

Carrying out Data Entry operations and assisting departmental Officer / Engineers, preparation of monthly and quarterly statements, dispatching and delivering documents/file movement and maintaining registers and documents, checking/preparation of agreements etc. as instructed by Engineer-In-charge. Notes: (1) Qualification: Each job shall be carried out by one data entry operator having minimum HSC pass (12th Standard) with complete knowedge of computer (like MS office, etc.) and should also be well conversant in English and Hindi language. (2) Deployment : The contractor shall deploy one Data entry operator for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Data entry operator exclusively for the particular job. (5) The Data entry operator should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Data entry operator will report to BARC Engineer/ EIC. (6) The minimum notice period before change of Data entry operator is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1074/- per day of shortfall in notice period will be levied on the contractor.

CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING / CIVIL / MASONRY JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge. Notes : 1. Labours charges includes cost of necessary carpentary / plumbing tools, minimum materials such as washher, taflon tape, rawlpludge, screws, clips etc. 2) Payment shall be made as per the Log book duly approved by the Enginner in charge. 3) Contrator shall arrange necessary Police Verification Certificate for the workers engaged for thess work.

SKILLED CARPENTERY/ plumbing /masonry JOB / WORKS with valid Police Verification Certificate for entire contract period.

SEMI-SKILLED CARPENTRY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period.

UN-SKILLED CARPENTRY/PLUMBING/MASONRY JOB / WORKS with valid Police Verification Certificate for entire contract period.

Core cutting in masonry / RCC works

Core cutting in RCC beyond 100 mm up to and including 150 mm Dia

Core cutting in RCC beyond 200 mm up to and including 250 mm Dia

Providing and supplying in stores White cement for joint filling and misc works as per direction of Engineer In Charge

Providing and supplying OPC / PPC cement for miscellaneous repair works as per direction of Engineer In Charge

Supply of crushed sand at site as directed by Engineer-in-charge.

Providing and supplying in stores ready mix plaster for miscellaneous repair works as per direction of Engineer In Charge

Providing and supplying in stores Glue pack of 1 kg each for different carpentary works at site as per direction of Engineer In Charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Fevicol or equivalent make

Providing and fixing of Packer with S S Nozles as per manufacturers specification and direction of Engineer-in-charge.

arvindinfraprojects (BID ID -3285076)

Meena Enterprises (BID ID -3285022)

MARUTI ENTERPRISES (BID ID -3285245)

Bidder Name

Shivkrupa Enterprises