SPECIAL REPAIR TO ROOF OF GARRAGES AT AF STN BHISIANA

Amount

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface Even and Fair (without using extra cement)with water proofing compound @ 3% by weight of cement as per manufacture etc, complete all as specified and as directed. by engr-in-charge Note: Water Proofing compound shall be measured and paid separatly .

Supply only Integral water proofing compound all as specified and as directed

M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint in Camouflage pattern having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M&L for Preparation of New Concreted/ Plastered surfaces of walls and applying two coats of white wash over a coat of chalk whitening, complete all as specified and as directed.

M&L for Preparation of old plastered surfaces of walls and applying Two coats of white wash complete all as specified and as directed.

M&L for Preparation of Old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Demolition Brick Work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Providing Cement concrete type B-0 (1:2:4) 12.5 mm graded stone aggregate for providing slope , roof kerbs or mud stops rounded or Copping or Chamfered edges all as directed by Engr-in charge

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings any gauge, thickness and in any position including ridges & lightning arrester strips, Nainital or similar pattern roof coverings, all as directed by Engr-in charge

S&F for Pre-Painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (Olive Green/ Green Colour) as in roof covering/cladding to wall, fixed with self tapping screws/ J hooks, complete all as specified and directed by Engineer in Charge.

S&F for Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ J hooks, complete all as specified and directed by Engineer in Charge.

S&F Industrial Exhaust alluminium Turbo wind ventilator/circulators round 20 inches neck diameter size with FRP/ Polycarbonate base for Top, Automatic (Non Power driven) fixed over sloping roof with necessary leak proof materials etc. as directed by Engineer in Charge.

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

S&F Rolled section/flat iron as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. FE 410 (gde-E-250), quality A all as specified as directed by Engineer in Charge.

S&F Rolled Mild Steel Plates (Plain or Chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE 410 (gde-E-250), quality A including nuts & Bolts having minimum 16mm dia and 300mm long, including necessary washers etc all as specified as directed by Engineer in Charge.

M&L for Preparation of New or Previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide exposed to view surfaces complete all as specified.

M/s Kamal Builders

SHARDA ENTERPRIES

Aman Enterprises

VISHAV CONSTRUCTIONS

M/s BALDEV SINGH