Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC GOVT CONTRACTOR VILL NAYA SUJAN FEROZPUR KALAN TEH DIST PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L1 | Accepted-AOC found lowest | |
| 2 | L2₹15.5 L+₹1.7 L (12.7%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹15.6 L+₹1.9 L (13.7%)Rejected-AOC | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹16.7 L+₹3.0 L (21.6%)Rejected-AOC | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹16.8 L+₹3.1 L (22.3%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
25 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Nitin Bisht
GE Basoli PO Lakhanpur Distt Kathua (JK) 184152
GE/BAS-58/2023-24 Certain repair to OTM and Md Accn in South Zone at Madhopur under GE Basoli
2023_MES_620761_1
GE/BAS-58/2023-24
Open Tender
Civil Works
Item Rate
270 days
Madhopur station under GE Basoli
As per tender docs
8 documents required · 8 mandatory
₹500
GE Basoli
₹40,000
Yes
20 Nov 2023
27 Sept 2023
27 Oct 2023
27 Sept 2023
25 Oct 2023
11 Oct 2023
Amount
M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 including demolition of old Brickworkor stone masonary complete all as specified and directed.
M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement including taking down old plastered surfaces complete all as specified and directed ..
M & L Rendering 5 mm thick in CM 1:3 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces complete all as specified and directed .
M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement including taking down old plastered surfaces complete all as specified and directed .
M&L Preparing new surfaces, plastered or unplastered of walll/facia/chajjas etc and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls complete all as specified and directed.
M&L preparing new plastered or unplastered surfaces of wall. and applying two coats of cement base paint on walls complete all as specified and directed..
M & L for preparation of new surfaces of steel of any description over 10cm with or girth and painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of new surfaces of steel of any description over 10cm with or girth and painted with two coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of new surfaces of wood of any description over 10cm with or girth and painted with two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparing new plastered or unplastered surfaces of wall. and applying two coats of oil emulsion distemper in walls complete all as specified and directed.
M&L preparing new plastered or unplastered surfaces of ceiling. and applying three coats of white wash on ceiling complete all as specified and directed.
M&L 1.5mm thick wall care putty on wall including roughening of suraface complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and directed.
M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed.
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exceeding 15 cm but n.exc 30 cm.complete all as specified and as directed
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n.exc 15 cm.complete all as specified and as directed
M&L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed..
M&L for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregates as in mass concrete complete all as specified and directed..
M & L for Durastone / Endura heavy duty virtified tiles of size 300mmX300mmX 8 to 9mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cementmortar finished ceemnt concrete surface fair & Smooth without using extra cementcomplete all as specified and directed.
Plain cement concrete padding 1:2:4 type B-0 of uniform thickness 50mm in two layer with chicken wire mesh in between the layers, top surface of plain cement concrete padding shall be furnished even and smooth w/o using extra cement,complete all as specified and directed.
M&L for Applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.25 Kg/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) laid on primed surface by forced application complete all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen of grade 85/25 @ 0.7 Kg/Sqm over the APP complete all as specified and directed.
Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound complete all as specified and directed.(WPC shall be measured and paid separately)
Supply only integral water proofing compound complete all as specified and directed.
M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed .
M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed .
M&L for Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes and dismantling floor, hearth or wall tiling a and removing rubbish off premises complete all as specified and directed.
M&L for Glazed ceramic tile 450x300x7mm/350x250x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab complete all as specified and directed.
M&L for MS Framed work such as Rafters Purlins, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 Sq cm in section in any position as in unframed work complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed.
Ditto all as per item No 26 here-in-before but except sheets
S&F 6mm thick Asbestos cement two piece adjustable plain wing ridge complete all as specified and directed.
S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified and directed.
S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC flush pipe of 32mm dia etc, complete all as specified and directed.
S & F in repair Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe etc., complete all as specified and directed
S & F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed
S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified and directed.
Refixing 15mm bore steel tubing and connection in new or old position (walls, ceiling, floors, etc) including taking down old steel GI pipe complete all as specified.
S & F in repair Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.
S & F in repair concealed type Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.
S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm complete all as specified and directed.
S & F in repair Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15mm bore complete all as specified and directed.
S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.
S&F in repair, brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed.
Supply & Fix PVC waste pipe suitable for wash hand basin/ kitchen sink/urinal etc complete all as specified and directed.
S&F in repair bathroom mirror cabinet (box type) complete all as specified and directed.
S&F Stainless steel kitchen rack of size of 900 x900 x 250mm complete all as specified and directed.
S&F in repair PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed.
S&F in repair Corner shelves fancy type complete all as specified and directed.
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F Door seal with rubber brush equal to the lenght of door complete all as specified and directed.
S&F in repair health Faucet with hooks and one mtr tube full brass, screwed for iron pipe and fixed complete all as specified and directed
S&F in repair CP brass toilet paper holder with necessary fittings complete all as specified and directed
S&F in repairs vitreous China urinals, half stall flat back white with grating, PTMT urine spreader and union for discharge pipe, 32 mm waste pipe with waste coupling complete all as specified and directed
S&F in repairs 15mm brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F in repairs 15mm brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F in repairs 15mm brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F in repairs 15mm PTMT Bib Tap screwed down for iron pipe and fixed complete all as specified and directed
S&F in repairs 15mm PTMT Pillar Tap (Fancy Type) screwed down for iron pipe and fixed complete all as specified and directed
S&F in repairs 15mm PTMT Angle valve (Fancy Type) screwed down for iron pipe and fixed complete all as specified and directed
S&F in repairs 32/40mm PTMTwaste coupling (Half or full threded) complete all as specified and directed
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Brass chromium plated, fixed with rawl plugs complete all as specified and directed
Dismantling of timber scantling (un framed) 40 Sq cm and over in section in any postion complete all as specified and directed.
Taking down eaves gutters and rainwater pipes 100/110 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.
S&F in repairs for 100mm bore cast iron P or S trap including jointing to waste pipe in PCC 1:2:4 type B-1 complete all as specified and directed..
S&F in repairs for 75mm bore cast iron floor trap including jointing to waste pipe in PCC 1:2:4 type B-1 complete all as specified and directed..
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls complete all as specified and directed..
S&F in repair PVC grating 100mm square/round of PTMTcomplete all as specified and directed..
S & F in repair PVC SWR Bends in any radius 110 mm bore complete all as specified and directed..
S & F in repair 100mm bore cast iron soil, waste and vent pipe in any length with or without ear, with cement joint fixed on wall with necessary arrange ment including two coat of black japan paint complete all as specified and directed..
S & F in repair 75mm bore cast iron soil, waste and vent pipe in any length with or without ear, with cement joint fixed on wall with necessary arrange ment including two coat of black japan paint complete all as specified and directed..
S & F in repair 100mm bore cast iron soil, waste and vent pipe in any length with or without ear, with cement joint laid in trenches or floor complete all as specified and directed..
S & F in repair 75mm bore cast iron soil, waste and vent pipe in any length with or without ear, with cement joint laid in trenches or floor complete all as specified and directed..
S&F 100mm dia bend (any radius) dimenshining pieces or tapers (large bore measured) complete all as specified and directed..
S&F 75mm dia bend (any radius) dimenshining pieces or tapers (large bore measured) complete all as specified and directed..
S&F in repair 100mm dia branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and directed..
M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but n. exc 4.00 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and directed
Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and directed
S & F Factory made Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed .
S & F Factory made Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed .
M & L 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 30 mm thick Factory made 2nd class hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 12mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.
M & L Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed
S&F for 18-20mm thick PVC 100% termite/water proof, fire retrandent eco friendly PVC soild board one side decorative choice laminate and other side balancing white with screws to steel/timber frame work etc complete all as specified and directed
S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed .
S & F Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed .
S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.
S & F 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed .
S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed .
S & F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed .
S & F in repair window stays any type of cast iron/ mild steel complete all as specified and directed .
S & F Mild steel Peg set of six complete all as specified and directed .
S & F n repair Mortice lock Brass 4 levers, vertical type size 100mm. complete all as specified and directed .
S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed .
S&F in repair harrison rails (curtain rails), mild steel chromium plated with fixing brackes, stops, rollers etc.complete all as specified and directed.
S&F decorative curtain rod with fixing brackes, stops, rollers etc.complete all as specified and directed.
S&F in repair floor door stoper of Aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length 150 mm inculuding valcanised rubber piece complete all as specified and directed .
S&F 100 mm long mild steel hasp and staple stove enameled black with bolts to hinges , complete all as specified and directed .
S&F aluin repair Aluminium (extruded section body)Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed .
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed .
03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.
M & L Galvanized mild steel wire-cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in position suspended false ceiling system using E - grid suspended ceiling grid system . The size of grid shall be 600x600 mm with GI frame work main runner 38X24 mm cross Tee 25X 24 mm and wall angle 24mmX24mm using 8mm thick ceiling panel laminated with PVC film on front face and foil back availalble in due drop textureas per IS -2095Part-I 1996 fixed in the grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butter fly clips including demolition of existing ceiling board of any description complete all as specified and directed.
M&L Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two Nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast including MS framed work in grill grating etc complete all as specified and directed.
M/S YOGESHWAR ASSOCIATES GOVT CONTRACTOR
Om Sai Ram Builders
Ms Narinder Kumar Sehgal
Malpotra Enterprises
G.M. ENGINEERING SERVICES
R K Builders
HARI OM ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .