ADDN ALTN UPGRADATION OF SUBMAIN WIRING AND CONNECTED WORKS OF BLDG NO P84 P94 AND P105 AT HQ CENTRAL COMD AND PROVN OF RAINWATER SHED AND FENCING IN BLDG NO 6 JOGGERS PARKUNDER GE EAST LUCKNOW

Amount

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil, complete all as specified and directed.

M&L for cement concrete1:3:6 type C-2 using 40 mm graded stone aggregate in filling foundation and mass concrete, complete all as specified and directed.

M&L for cement concrete1:2:4 type B-1 using 20 mm graded stone aggregate in coping and similar, complete all as specified and directed.

Surface excavation n.exe 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Removing excavated soil to a distance n.exc 50 m and deposited where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for Hard core of Broken bricks of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2,, as in sub base to floor, complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry, with grey cement and pigments, laid over 15 mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed.

S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165, complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with L type or J type or cranked hook bolts complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle of Fe 410-w (Gde E 250) quality A complete all as specified and as directed.

Taking down carefully old U/S , DBs and Sheet metal enclosure any type and size et ccomplete all as specified and directed. by Engineer-in-charge.

Taking down carefully old U/S Sub main wiring,cables etc complete all as specified and directed.by Engineer-in-charge.

M&L in factory made distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB complete all as specified & directed

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 08 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 160 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 16 Nos.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 160 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 16 Nos.

M&L in factory made distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB complete all as specified & directed.

M&L in factory made distribution board 8 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB complete all as specified & directed.

M&L in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

M&L in replacement of MCB Single Pole & Neutral MCB 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

M&L in replacement of MCB Single Pole & Neutral MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

M&L in replacement of MCB Single Pole & Neutral MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

M&L for replacement TPN MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

M&L for replacement TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified & directed.

M&L for replacement TPN MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified & directed.

Supply and fix MCCB FP 415V, 100Amp 25K capacity complete all as specified and directed.

Supply and fix MCCB FP 415V, 125Amp 25K capacity complete all as specified and directed.

Supply and fix MCCB TP 415V, 125Amp 25K capacity complete all as specified and directed.

Supply and fix MCCB FP 415V, 160Amp 36K capacity complete all as specified and directed.

Supply and fix MCCB TP 415V, 160Amp 36K capacity complete all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 2.5 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittingscomplete all as specified and directed.. Note- Two run of 4 sqmm wire and one run of 2.5 sqmm cable incl 20mm conduit will be measured as one length.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.. Note- Two run of 6 sqmm wire and one run of 4sqmm cable incl 20 mm conduit will be measured as one length.

M&L for wiring with four single core 10 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 6.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed..Note- Three run of 10 sqmm wire and one run of 6sqmm cable incl 25mm conduit will be measured as one length.

M&L for laying armoured Copper power conductor cable 4 core 10 sqmm multi-stranded copper conductor PVC insulated and ISI marked suitable for 1100 V complete all as specified and directed by Eng-in-Charge.

M&L for wiring with four single core 16 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 10.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed..Note- Three run of 16 sqmm wire and one run of 10 sqmm cable incl 25mm conduit will be measured as one length.

M&L for laying armoured Copper power conductor cable 4 core 16 sqmm multi-stranded copper conductor PVC insulated and ISI marked suitable for 1100 V complete all as specified and directed by Eng-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed by Eng-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed by Eng-in-Charge.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and directed.

Supply and fix Modular PVC enclosure for AC with a two pin and earth plug and socket complete with one 32 amps SPN minitrip MCB complete all as specified and directed. BY Eng-in-Charge.

Supply and fixing PVC trunking 54x105 mm size for cable tray riser to DB and DB to sub DB for sub main wiring including making good to disturbed wall surfaces complete all as specified and directed. (Note Rate of Accessories such as elbow , bend tee , socket, junctions and flexible cover ,Coupling set/End cap/Internal corner/External corner/flat corner/T-Piece/3-D Internal corner is incl in the item rates and no extra payment will be done to the contractor complete all as specified and directed.

Taking down Old Unservicable Earthing of any type (GI Plate, wire/Strip type) complete all as specified and directed. by Eng-in-Charge.

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion complete all as specified and directed.

M&L for chemical Earthing complete with Copper plate 600 x 600 x 3 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.5 Mtr below the ground level connected to copper strip of 20 mm x 3 mm size by means of bolts, nuts and washers , returning & filling the pit with excavated soil mixing with charcoal 250 KG ,crystal salt 200 KG , magnesium sulphate of 100 KG and vegitable soil all around the plate up to 350 mm above from top edge of plate and balance portion filling with excavated soil in layers not exceeding 25mm thick, 25 mm galvanized iron medium grade watering pipe up to top of plate ,50 mm bore galvanized iron light grade pipe for earth strip protection , including all excavation earth work in any type of soil ,PCC 1:3:6 type C1 for chamber of internal size 300 mm X300X300mm with 120 mm thick wall and 700 mmX700mmX150 mm thick ,bed concreate,RCC 1:2:4,type B1 for precast chamber cover 50 mm thick ,reinforced with welded steel wire fabric of XPM jali (weight not less than 4.00 Kg/sqm),funnel,with wire mesh, complete al as specified and directed. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and copper strip shall be deemed to be included in unit rate quoted by tenderer.

Supply and fix copper strip of size 20 x 3.0 mm with saddles and fixing screws etc for roof conductors and down conductors above ground level complete all as specified and directed

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color incl two coats of wall colour for matching with the existing walls complete all as specified and directed. by Eng-in-Charge.

QUALITY CONSTRUCTIONS CO (BID ID -3086438)