Providing cement concrete pavement with drainage facilities to the internal streets of Pon-Selvaraj nagar at Ariyapalayam in Villianur Commune.

Amount

CodeNo.2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

CodeNo.4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2.4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size).

CodeNo.4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3.6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

CodeNo. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size).

CodeNo. 4.3.1 Centering shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns.

CodeNo. 5.12 Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands ,copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering,finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No.5.22.7 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No. 7.23A Providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide.

Code No. 11.3.1 Cement concrete flooring 1:2:4 (1 cement :2coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc.complete. 40mm thick with 20mm nominal size stone aggregate

CodeNo. 11.35 Providing and fixing M.S.angle 50x50x5 mm to act as nosing with lugs of M.S.flat 10x5 mm , 10cm long, forked at end 60 cm apart (minimum three lugs to be provided),including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete.

CodeNo.13.16.1 6 mm cement plaster to ceiling of mix - 1:3 (1 cement : 3 fine sand).

Code No.15.3 Demolishing R.C.C work manually / by cum mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead

Code No. 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar

CodeNo.30.7 Supply of Quary rubbish including stacking to department gauge for premeasurement and spreading required thickness as directed by the Engineer-in-charge

Code No.4.1B.3 Construction of granular sub-base by providing close graded meterial, spreading in uniform layer with motor grader on prepared surface, by mixing place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - By mix in place method - For grading III material.

V.Palani - Contractor

DATCHANAMOURTHY

M. GUNASEKARAN