ESTIMATE FOR REPAIR AND RENOVATION OF GAUGE HUT AT RD 20748 AND 29166 MTR OF KANDI CANAL 1

Amount

Bricks First Class (Clay/Fly Ash) (at kiln site) - (Note:- District wise rates for Bricks / tiles attached at Annxure-II) Tiles 22.86cm X 11.43cm X 3.81cm hand moulded at kiln site for all Districts.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Dismantling brick or flagged stone flooring without concrete base.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below.

Windows of area 3 sqm and below

Scraping Cement plaster

Applying bitumen on roof including heating and carrying to roof.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified

Providing and flxing on- wall face unplasticised Rigid PVC rain water plpes single socketed (working pressure 4 kgf Cm2) conforming to IS : .4985, with MS including fixing with MS clamps U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia

Screed of 50mm thick cement concrete 1:8:16 with stone aggregate to ba laid below the topping ysing mechanical mixer for mixing of material

Providing and laying floor tiles vitrified in different sizes in light colour shades made using Full Body Technology (thickness to be "by the specified manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na Ideal choice for high traffic zones.) Size 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in?Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying 60 mm thick factory ade cement concrete interlocking paver block of M-35 grade -machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic Compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all Complete as per directions of Engineer-in-Charge IS code :15658(2006) for Non traffic Areas and streets having width less ttan 3.05 mt.( Also not to used over footoaths)

12.5 mm thick cement plaster 1:4

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more frame of slze 118mm x 60mm with 40 mm wide slngle rebate welghing 3,43 kg per meter

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) plpes (as per IS:15801-2008) SDR 7.4 UV stabilized & anti microbial fusion welded, having thermal stab lity for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing including testing of pipes complete as per direction of Engin eer in charge Concealed work- including PN - 16 Pipe, 25mm o/d cutting chase & making good the wall etc.

PN - 16 Pipe, 32mm o/d

Providing, Laying, fixing & jointing of P.V.C. Pipes as per 1SI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to Correct alignment and gradients, cutting, jointing and testing complete as per specifications 110mm o/d PVC pipe of 2.5 Kgf. /sqcm

Constructing brick masonry manhcle in cement mortar 1:5 ( 1 cement : 5 coarse sand ) vith RCC core wall between masonary, R.C.C. top slab 20mmn thick using M-20 mix, foundation Concrete 1:4:8 mix cernent: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floatlng coat of neat cement and maklng benching In cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone nominal aggregate 20mm size) finished with a floating coat of neat cement, Orange coloured PVC steps Including RCC cOVer with frame Internal dimensions.complete as per standard deslgn. (In water logged area)Inside slze 150x180 cm and 120 cm deep

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 12.50mm 1:2:4 benching thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm X 6JOrmm , inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I cormplete as per standard design.Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Providing and fixing in position vitreous Chinaware whíte IIndian make large flat back or angular ipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm C.P. brass Urlnal Spreader Ocolar-Regular and C.P, brass tube connection 300 mm long complete.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm Complete in all respect

Vitreous white Chinaware Partition Large partitlon slze 75 x 16.5 x 36.5 cm

Providing and fixlng ln position vitreous chinaware white suites of lavatory approved make (to the of approval Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 450mmx300mm

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make of (to the approval Engineer-in-charge)

Providing and fixing vitreous chinaware pedestal of approved make (to the of approval Engineer-in-charge) for wash hand basin complete in al respectVitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing PTMT Bottle trap 31mm single plece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimunm water seal, weighing not less than 260gms of approved make (to the of approval Engineer-in-charge) for wash hand basin and sink complete In all respect..

Provlding & Fixing In posItion Smm thlck bevelled edge mlrror cf superlor glass (of approved nnake) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete In all respect (as required by the Engineer-in- Charge) ((a)) Size 600mmx450mm

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval· of Engineer-in-charge ) complete in all respect. ((a)) C.P.brass 15mm stop cock Male and female end

Providing and fixing in position automatic brass Ball Cock in tanks. (A) Plastic Ball Cock with rod and Plastic Bal () 25mm /d

Providing 8& placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with Suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (0) Triple Layer Tanks

Providing and fixing ir position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dla including cost of seat cover conmplete in all respect and to the entire satisfaction of Engineer-in-charge. Providing and fixing inposition H.C.I. soll waste vent or antisyphonage plpes to I.S.I. specificatlon' of E.D,C manufacture ot of any other reputed firm Including cutting, jointing, wastage, but excluding cost of lead jolntlng. (b) 100mm Vd H.C.I. plpe

Regrading terracing of mud plaster coverec: with tlles or bricks In cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (1SI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge: (xii)) PVC INSULATED PVC SHEATHED. FR ROUND FLEXIBLE CONDUCTOR CABLE: COPPER Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare ih pipe Quantity 110.95or on surface with cleats of sultable size complete In all respect as desired by the Engineer-in-charge: ((e)) Overall slze 2.5sq. mm (50/0.25mm), 2Core

Supply and erectlon of PVC Insulated PVC sheathed (3 core) round flexible wlre with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare In pipe or casing of suitable slze complete In all respect as desired by the Engineer-in-charge: ((c)) Overall size 2.5sq.mm (50/0.25mm), 3Core

GI PIPE POLES: Supply and erection of G.I. pipe 'A quality of 'suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required: (34.29 B) SINGLE ARM BRACKETS FOR GI PIPE POLE: (()) Supply and erection of G.I. Pipe 40mm dia. (A-class) Single arm bracket of suitable length give a total overhang at a tentative angle of 100/1050, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 8omm/100mm with G) reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site: (a)) Single Arm Bracket 1 metre Long with G.I. Reducer 80mm x 40mm

Any Other Items (CSR)

THE VISHNU NAGAR COOP LABOUR AND CONSTRUCTION SOCIETY LIMITED