Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹14.3 LAccepted-Finance | 1st | Accepted-Finance Found lowest | |
| 2 | 2nd₹21.9 L+₹7.6 L (53.0%)Rejected-Finance | 2nd | Rejected-Finance Found Not lowest | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹14.5 L
EMD Value
₹73,000
Closing Date
19 Jun 2020, 3:00 pmClosed
APM
OFFICE OF APM, UPRNN GORAKHPUR UNIT CARMEL ROAD GORAKHPUR
GALVANISED IRON WORK
2020_UPRNN_483118_1
127 DT 12.06.2020
Open Tender
Iron/Steel Materials
Item Rate
GORAKHPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
UTTAR PRADESH RAJKIYA NIRMAN NIGAM LTD
₹73,000
7 Jul 2020
13 Jun 2020
19 Jun 2020
13 Jun 2020
19 Jun 2020
13 Jun 2020
Amount
Providing and fixing precoated galvanised iron profile sheet of make TATA/ Zindal or Equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised iron sheet make TATA/ Zindal or Equivalent roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : (a) Flashings/ Aprons./Corner ( Upto 600 mm)
M/S Purvanchal Fabricators
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .