Repair to path kerb stone, road furniture and road sign boards etc in Technical Area at Air Force Station Jaisalmer

Amount

Labour only (except material for road side berms of 100 mm spread thickness with available approved soil/moorum obtained from within MD land as directed spread rolled and consolidated to gradient and camber required etc complete all as specified and as directed by Engineer-in-Charge.NOTE 1.Approved soil/moorum shall be obtained from within MD land as directed 2. No lead charge or charge of whatsoever nature shall be paid on this account.

Cat Eye solar reflective type of metal body alloy of size 100 mm x 100 mm x20 mm with PAMMA striplens reflector of model No DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions fixed in as repair complete all as specified and directed. MAKE:-Dark eye, Green light,Dev plastic

Metal tubular Dealineator made out of ABS round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of size 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green red and yellow reflector radium tape of 25 mm wide strip with theft steel net for reflector protection including embedding in PCC 1:2:4 of size 150x150x 300 mm type B1 using 20 mm graded stone aggregate as fixed as in repair complete all as specified and directed. MAKE:-Dark eye, Green light,Dev plastic

Factory made kerb stone of M25 grade cement concrete in postion to the required level and curvature , jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm ) including making drainage opening wherever required including demolition of existing kerb stone complete all as specified and directed.

Preparation of newly surface of road side kerb stone and applying two coats of synthethic enamel paint of approved different tint and pattern over a coat of primer etc complete all as specified and directed.

Preparation of old surfase of road side kerb stone and applying one coats of synthethic enamel paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above GL) complete all as specified and as directed .

75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor, finishing cement concrete surface fair and even complete all as specified and directed.

Factory made chequered cement concrete tiles, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, including demolition of existing complete all as specified and directed.

Coloured endura parking tiles10mm thick of size 300x300mm set ,jointed and pointed in neat cement slurry in floor with grey cement and pigment including demolition of existing complete all as specified and directed .

15 mm thick screed bed or a layer of bedding for laying of floor finishes in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Machine pressed factory made rubber moulded precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand/stone dust bedding below pavor tiles laid to required level & slope including demolition of existing complete all as specified and directed.

100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in alternate bays complete all as specified and directed.

12 mm thick forming expansion joints filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade "B" for 100 mm thick slab complete all as specified and directed.

Forming contraction (dummy ) joints 65 mm deep x 10 mm wide filled with sealing compound Grade " B " complete all as specified and directed.

Forming construction joints 30 mm deep x 10 mm wide filled with sealing compound grade " B " complete all as specified and directed.

Providing broom finished surface of concrete pavement while concrete is green complete all as specified and directed.

Double legged informatory sign board of size 1.00m x 1.50m (Appx 1.5 sqm) fixed on single frame, both side and meeting back to back on the stainless steel 50x50x3.65mm square pipe. The board are of high intensity grade RETRO-REFLECTIVE SHEETING OF AVERY DENNSION sheeting of avery dennison made out of 2mm thick alcoband sheet/aluminium composite panel sheet confirming to IS-736, colour as approved by Engg-in-Charge and stainless steel square pipe of size 50x50x3.65mm with nut and bolt. The lettering will be computerised cut to high intensity grade white sheeting (AVERY DENNSION) and mechanically fixed on board over verticle post 50mm stainless square pipe, 3.65 mm thick 3.20m long having 2 Nos flat iron strip of strip 40x5 mm, 0.30mm long on bottom and fixed with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) in post holes of size 0.45x0.45x0.75 M including dismentaling of old board complete all as specified and directed.

Informatory sign board as per existing of approx size 1.00m x 1.50m (Appx 1.5 sqm). The board are of high intensity grade reto-reflective sheeting of AVERY DENNSION made out of 2mm thick alcoband sheet/aluminium composite pannel sheet confirming to IS-736, colour as approved by Engg-in-Charge. The lettering will be computerised cut to high intensity grade white sheeting (Avery Dennison) and mechanically fixed on board both side including dismentaling of old board and fixed nut and bolts on the stainless steel frame complete all as specified and directed.

MARUDHARA CONSTRUCTION COMPANY

GEMRARAMCONTRACTOR

M/s RKG CONSTRUCTIONS