CONSTRUCTION OF BUILDING (ART CRAFT ,SCIENCE LAB AND LIBRARY AT GHSS GHO MANHASAN (ZONE MARH) DISTRICT JAMMU

Amount

Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:5:10) grade, with 40mm nominal size of aggregates. Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in 1:1.5:3 (1 cement:1.5 coarse sand: 3 graded stone aggreate 20mm nominal size in suspended floors, balconies,landings and staircase having upto 15 degree slope excluding cost of centering and shuttering.All work upto floor V level.

"Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen""ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)"

Reinforcement for RCC work including straightening cutting,bending,placing in position & binding all complete with TMT bars.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means)

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) & Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Angle 40x40x6mm

Centring and Shuttering including strutting, propping etc and removal of form work for foundation , footings , basis of columns etc. for mass concrete.

Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams ,plinth beams ,girders,bressumers and centilevers.

Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform

Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls under 20 cm wide

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding 10 mm square bar 4" c/c

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.First class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick Second class kail wood

Decorative ply wood both side decorative veneer (type 1) conformiong to IS 1328 BWR type

Providing fixing and incorporating glass strips in joint of terrazo/cement concrete floor 40mm wide and 4mm thick.

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed.

6mm cement plaster to ceiling pf mix 1:3(1 cement 3 fine sand)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed

Forming grooves of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the grooves complete as per specificatiOns and direcUon of the Engineer-in-charge 13.83.1 15mm wide and 15mm deep groove metre 35.25

Making Blackboard (1no.)one in each class room in cm (1:4) complete in all respect as per drawing (paid as L S).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New wood work (two or more coats)

Providing and fixing electic point complete in all respects as per directions of Engineer incharge

Providing and fixing POWER POINTS complete in all respects as per directions of Engineer incharge

Writing name of school through painter (paid as L S).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Providing and fixing white vitreous china laboratory sink with C. I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required Size 600x450x200 mm

40 mm dia. with length not less than 700 mm pre waste pipe for sink and washbasin

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, anity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm)

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. INTERNAL WORK-Exposed on wall 15 mm dia. nominal bore Medium

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. INTERNAL WORK-Exposed on wall 20 mm dia. nominal bore Medium

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia with 25mm waste hole.

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15mm Nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 20mm nominal bore

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm Nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20mm nominal bore

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 75MM

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110MM

Constructing soak pit 1.20x1.20x1.20m filled with birckbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design

Constructing brick masonry manhole in cement mortar1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stoneaggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. 21.7.1 Inside size 90x80 em and 45 mm deep including C.l. cover with frame (light duty) 455x61 Omm.internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 Crushed stone aggregate.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 Sliding door bolts (300 x 16mm) (Code No.9.95)

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 tower bolt200x10mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 tower bolt150x10mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 handle 125mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 handle100mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 twin rubber stopper

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works

Som Raj Sharma

ASHWANI KUMAR

M/S GUCHHU RAM

RAKESH KUMAR