PROVN OF WAITING HALL FOR PATIENTS NEAR ICU AND OT, SPECIAL REPAIR TO GREASE TRAP AND SEWAGE LINE INCLUDING MANHOLE AND SEPTIC TANK AT BLDG NO T-63, COVERED GARBAGE BIN FOR SEGREGATION OF BIO MEDICAL WASTAGE , 02 X 320 LTR DEEP FREEZER FOR OR MESS AN

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5 m in depth for foundations of walls and not exc 10 Sqm on plan and not exc 1.5m in depth in any type of soil complete all as specified and as directed.

All as per item 2 here in before but depth exc 1.50 mtr and not exc 3.0 mtr complete all as specified and as directed.

Returning, filling in incl levelling, watering and well ramming in layers not exc 25cm in foundation trenches using any type of soil complete all as specified and as directed.

Removing excavated soil including disposal of all debris to a distance exc 1.5 KMtr but not exc 5 Km outside MOD land complete all as specified and directed.

Removing excavated soil to a distance exc 500 mtr but not exc 1.0 km and depositing where directed complete all as specified and directed.

M&L Hardcore of broken stone or boulders of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L Cement concrete in foundation filling and mass concrete type C2 (1:4:8) using 40mm graded stone aggregate complete all as specified and as directed.

M&L 40mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in DPC to horizontal or vertical surfaces incl necessary form work etc. incl supply and mixing water proofing compound as per manufacturer's instructions complete all as specified and as directed.

M&L 75 mm thick PCC type C-2, 1:3:6 (40 mm graded stone aggregate) as in path/plinth protection and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in Cement Mortar 1:6 complete all as specified and directed.

M&L Brickwork with sub class 'B' bricks, straight or curved on plan in any radius as in half brick thick wall, built in Cement Mortar 1:4 complete all as specified and as directed.

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item 13 here in before but 6 to 8 mm complete all as specified and as directed.

M&L Mild steel TMT bars 8mm dia and over up to 10mm as in stirrups, spacers and binders and binding with mild steel wire (annealed) not less then 0.90mm dia complete all as specified and as directed.

M&L Reinforced cement concrete design mix M-25 using 20mm graded stone aggregate as in foundation, footing, plinth, lintle, roof beams ,bases for column etc complete all as specified and as directed. Note : Reinforcement and form work shall be measured and paid separately.

M&L Reinforced cement concrete design mix M-25 using 20mm graded stone aggregate as in columns, pillers etc complete all as specified and as directed. Note : Reinforcement and form work shall be measured and paid separately.

M&L Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in chajjas etc complete all as specified and as directed. Note : Reinforcement and form work shall be measured and paid separately.

Formwork to sides of concrete flat footing, plinth beams complete all as specified and as directed.

Formwork to sides of column square or rectangular in plan for rough finished surfaces of concrete complete all as specified and as directed.

Formwork to soffits of floor or roof beams and gable beams, lintel beams etc complete all as specified and as directed.

Formwork to chullah hoods, chajjas etc complete all as specified and as directed.

Formwork to edges of concrete flats, treads etc complete all as specified and as directed.

M&L 75mm thick Cement concrete type D2 (1:4:8) using 40mm graded stone aggregate, finished even and fair as in sub base complete all as specified and as directed.

M&L 25mm thick cement concrete type B1,1:2:4 (20mm graded stone aggregate) as in sub floor below tiles complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors etc laid over 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and as directed. Make:Somany/ Kajaria/Johnson

All as per item No. 26 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for 7mm to 8mm thick ceramic non skid tiles coloured of area exc 0.11 Sqm but not exc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles laid on 15mm thick cement screed (1:4)complete all as specified and as directed. Make:Somany/ Kajaria/ johnson

M&L for digital printed coloured glazed ceramic tiles of any size 7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in cement mortar (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface shall deemed to be including in quoted rates)

M&L Granite stone slab (of any type) 18 to 20mm thick work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms etc over and including 20mm thick screed bed or bedding in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L 15mm thick rendering in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface fair and even without using extra cement complete all as specified & directed.

M&L 15mm thick rendering in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished the surface fair and even without using extra cement complete all as specified & directed.

M&L preparation of new wall surface including chalk whiting, on plastered surfaces, preparatory to distempering and applying two coat of oil bound distemper over and including a coat of 2 to 3 mm thick wall care putty complete all as specified and as directed.

M & L preparation of new surfaces of walls plastered or unplastered and applying two coats of cement base paint to walls to obtain uniform surfaces complete all as specified & directed.

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply, fabricating and fixing windows of powder coated aluminium section two track with two sliding shutters with following sections : (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick (d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick (e) sliding shutter to be provided with 5.5mm thick sheet glass (Modi/Saint gobain/tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm including grill complete all as specified and as directed Make: Jindal/Hindalco/Balco

S&F aluminium anodised door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf of Make Classic/Argent as approved. f) Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 12mm thick prelaminated particle board laminated both side exterior grade complete all as specified and directed Make- JINDAL/HINDALCO/BALCO..

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening complete all as per manufacturer instructions, specification, drawings and as directed. Make - Rajshree / Sintex

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails either suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing incl 3 Nos 100mm stainless steel Hinges, 2 Nos 200 mm Aluminium Tower bolt and 2 Nos 150 mm Aluminium handle complete all as specified and directed.

S & F powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered including 5mm thick plain/frosted tinted glass on top half portion and 12mm thick pre-laminated sheet fixed in half bottom portion complete all as specified and directed. Make:- Jindal/ Hindalco/Balco

S&F powder coated aluminium frame ventilator shutters, sliding type with or without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, 4 to 5mm thick glass panes, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays/lock, Rollers, hinges type B-21 100mm long (2 no.) suitable handle (1 no per shutter) complete all as specified and directed.

S & F 150mm size square, UPVC floor trap grating with anti mosquitoes filter complete all as specified and directed.

S & F vitreous china wash hand basin white Oval type including necessary fixing arrangement, 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins etc including 15 mm bore CP fancy type piller tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed, and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S & F vitreous china urinals, bowl type (back corner wall type), including polyethylene of low or high density or PVC 32 mm dia and 15mm dia stop cock etc with 60mm long screwed pointing around urinal back in cement complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedstal pattern) white (squatting pan & trap including connection to drain (or out going pipe and to flushing pipe anti symphonic pipe etc complete all as specified and directed.

S & F Plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F Wall mounted grab bar 300 mm and fixed in position complete all as specified and directed. Make-Cera/ Hindware/ Parryware

S&F PVC valve less symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed to walls/ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed to walls/ceilings or laid in floor complete all as specified and as directed.

S&F 75 mm dia Hubless cast iron pipes, waste and vent pipes in any length with or without ears, fixed to walls with stack clamps or laid in trenches or in floors or walls and complete all as specified and directed.

S&F 100 mm dia Hubless sand cast iron pipes, waste and vent pipes in any length with or without ears, fixed to walls with stack clamps or laid in trenches or in floors or walls and complete all as specified and directed.

S&F 100 mm dia cast iron floor trap including jointing in run lead complete all as specified and directed.

S&F 100 mm dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm dia cast iron branch pieces, single (equal or unequal) Tee, sockets, etc with oval access door and fitted with stack clamps, etc complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head, screwed both ends for 20mm bore iron pipe complete all as specified and as directed.

S&F Bib taps, brass chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F Stop valves/angle cock, fancy type, chromium plated screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions and fixed complete all as specified and directed.

S&F tubular towel rail, 20mm dia D-type, 60cm long between flanges of brass chromium plated fixed complete all as specified and directed.

S&F chromium plated toilet paper holder complete all as specified and directed. (Make : Prayag, Cat No BA-98 or equivalent Model of Polytuf/Shakti.

S&F Reinforced concrete pipes, class NP2 laid and jointed complete with collars laid in trenches and jointed, internal dia of pipe 150 mm, complete all as specified and directed.

M&L cement concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) incl packing under and haunching against the sides of pipes after they are laid and tested, bores of pipe 150 mm complete all as specified and directed.

Cutting into existing manholes for connecting new mains pipe making good to pipes rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 150 mm dia complete all as specified and directed.

S&F health faucet with 1 mtr tube and hook compete all as specified and directed (Make : Prayag, Cat No.BEA-41/Equivalent Model of ZIM/ESSCO).

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Steel work in tubular trusses/Posts/Rafters/Purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS- 1161-1979 gde SI-240 complete all as specified and directed.

S & F plain MS plate incl cutting / welding & drilling complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M& L GI anodised snap grid ceiling made of Tee and angle of size 24.5 x 24.5 x1.50 mm thick, size of grid 605 x 605 mm with GI wire suspender 2 to 3 mm dia fixed with wooden/steel truss/rafter flat or slope complete all as specified and directed.

M&L for 4 mm thick E-board classic of size 595 x 595 mm, fixed to GI snap grid ceiling flat or slope complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 Nos/RM and decorative end supports etc complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

M&L for plates(plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding complete all as specified & directed.

S&F 1000 Ltr Capacity Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position including making necessary connections complete all as specified and as directed.

S & F ball brass valves, high pressure, with polyethene float and fly nut complete screwed for iron pipe of 20mm dia complete all as specified and as directed.

M&L 50 mm thick PCC 1:3:6 Type C2 (using 20 mm graded stone aggregate) below tiles for levelling of existing surface, mass concrete, etc complete all as specified and directed.

M&L for heavy duty coloured (approved colour) fully vitrified paving tiles of size 300mmx300mmx10-12mm thick, set and jointed in neat cement slurry and pointed in coloured or white cement to match the shade of tiles over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. Make:Somany(Dura stone)/Marbito(M stone)/ Riwasa( Parkland series)/Johnson(Endura)/ Nitco(Kratos)

M & L PCC 1:3:6 type C1, (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor & pavings not exc 15 cm thickness below or above GL complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of reinforcement cement concrete in ground floor and paving not exc 15cm thickness below or above ground level including disposal of all debris outside MOD land complete all as specified and directed.

M&L PCC (1:3:6) type C2 using 40 MM graded stone aggregate as in mass concrete for foundation complete all as specified and as directed.

Form work to soffits of suspended slab such as roof slabs floor, slab landing and cover similar work not exc 200mm thick complete all as specified and directed

M&L for Reinforced cement concrete as in landing slabs in cement concrete M-25 using 20mm graded crushed stone aggregate , etc complete all as specified and directed.

S & F 600 mm x 600 mm size cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers etc as instructed by Engineer, air tight cast iron man hole frame and cover with three coats of approved brand Black Japan Paint complete all as specified and as directed.

M&L SGSW grade 'A' drain pipes 150 mm internal dia laid in trenches on concrete bed and jointed complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in benching, bed plates, coping and like including necessary form work complete all as specified and as directed.

S&F CI cowls 100mm dia complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L 100 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in flooring surfaces finished even & smooth without using extra cement complete all as specified and as directed.

Supply and laying sand (30 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

M&L for vibrator compacted rubber/glass moulded precast concrete interlocking paver block shape, size and colour as approved confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made with grey cement and pigment complete and including 25 mm thick providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in sides of paver blocks complete all as specified and directed. (Make : Unistone, Duracrete, Ultra)

S&F SFRC manhole cover and frame (Square/rectangular/circular) with suitable size of existing manholes and placed over manholes at site complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc. 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil complete all as specified and as directed.

M&L Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

S&F steel tubular trusses including special shaped washers etc. complete using ERW but welded tubes confirming to IS 1161-1979 graded St 240 complete all as specified and as directed.

S&F for purpose made mild steel bolt 75mm long 12mm dia with hexagonal or square head one end and screwed the other or screwed both ends each screwed is to be fitted with washers and one hexagonal or square nut complete all as specified and as directed.

Supply, fixing and connections Deep freezer hard top of 320 litre capacity having single door with refrigerant R134a (eco friendly refrigerant gas), analogue temp setting, door gasket, temperature range -18 degree to -20 degree range, having Castor wheel arrangement with minimum dimensions (1180 x 665 x 830)mm complete all as specified and directed. Make : Blue Star/ Voltas/ Carrier

S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA .Make: V-Guard/Bluebird/Everest

Supply, Fixing and installation Reverse Osmosis Plant of out put capacity of 7 Ltr/hr including maing all necessary water connections and electric connections complete all as specified and directed. Make : Kent Model Elite or equivalent Model of Aquaguard/ Blue Star

Supply, fixing & installation of water dispenser of cooling capacity of 2.5 Ltr/hr and heating capacity of 5.0 Ltr/hr , with compressor charged with refrigerant R134a (eco friendly refrigerant gas). Suitable for accommodating water jar 20 Ltr capacity on top and working on input power supply 230V / 50 Hz all as specified and directed. Make : Blue Star/ Voltas/ Carrier

M & L point wiring with copper conductor multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm of earth conductor to be drawn through PVC conduit including all accessories like, saddles, bend, tee, etc complete all as specified and as directed.

S & F switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

S & F socket outlet 2 in 1, 3 pin, flush type 5 and 15 Amp complete all as specified and as directed.

Supply, fixing & installation Refrigerator, electric driven (single phase) 230 Volt, having gross volume of capacity 300 Litres, single door type, frost-free, built in stabilizer, with smart inverter compressor charged with non CFC eco friendly refrigerant gas BEE 5 star rated complete all as specified and as directed. Make: LG/ Samsung/ Whirlpool

Supply, fixing & testing Window type air conditioner electric driven (single phase), cooling capacity 1.5 TR. BEE 5 star rated, charged with Eco friendly Refrigerant R-134/R-32 with all connected accessories etc complete all as specified and as directed. Note: Window A/Cs rate include the cost of wiring and switches etc . Make : Blue Star Model No. 5W18GBTI or equivalent Model of O General/ Carrier/ Hitachi

Supply, fixing and installation of air cooled inverter based split AC unit with both heating (Auto defrost) and cooling functions, Air conditioner is electric driven single phase of capacity 1.5 TR , 3 Star rating with charged with Eco friendly Refrigerant R-134/R-32 and comes with special health filter and all connected accessories and copper tubing from indoor to outdoor and making of hole in any type of wall, including PVC drain pipe from indoor unit upto plinth protection of building , Outdoor split AC hanging wall mounted stand and flexible PVC casing pipe minimum 40mm dia covered on all exposed copper insulated pipe line and PVC wire connected accessories etc complete all as specified and as directed. (Note : Copper tubing required beyond 3 mtr also included in quoted rates) Make:- LLOYD Model No. (Copper, LS18H31LF,WHITE) or equivalent Model of Carrier/ Hitachi/ Bluestar

S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA .Make: V-guard/ Bluebird/ Everest

S & F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 6 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 240 Volts, flush to wall complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps (10 KA) 'C' curve, 240 Volts complete all as specified and directed.

S&F MCB, SP, 6 to 40 Amps (10 KA) 'C' curve, 240 Volts complete all as specified directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and directed.

M & L Sub main wiring using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire and drawing in to PVC conduit complete all as specified and as directed. Note: Two runs of 4sqmm copper FRLS cable & one run of 4.0 sqmm copper cable in and including 25mm PVC conduit medium grade shall be measured as one unit.

M & L Sub main wiring using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire and drawing in to 32 mm PVC conduit complete all as specified and as directed. Note: Two runs of 6 sqmm copper FRLS cable & one run of 6.0 sqmm copper cable in and including 32mm PVC conduit medium grade shall be measured as one unit.

M&L for point wiring for modular switches for one light point or one fan point controlled by one No one way switch with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through and including rigid non-metallic PVC Conduit medium grade including cadmium plated screws as per ISS, concealed in wall suitable for modular fittings concealed in wall including 1.5 Sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

All as per item No 120 here in before but one 3 pin socket outlet 5 amps on the same board with other switches complete all as specified and directed.

All as per item No. 120 here in before but one three pin 5 Amps socket out let on independent board complete all as specified and as directed.

All as per item No. 120 here in before but point wiring of copper cable multi stranded 4.0 Sqmm size for AC point wiring with 4.00 Sqmm size of earth conductor complete all as specified and directed.

S&F ceiling rose, surface Bakelite 65 mm x 50 mm, 3 terminals complete all as specified and as directed.

S&F switch modular, flush button type, single pole, one way 5 Amps complete all as specified and as directed.

S&F switch modular, flush button type, single pole , one way15 Amps complete all as specified and directed.

S&F modular socket outlet 3 pin and 2 pin, 5 Amps , flush type complete all as specified and directed.

S&F modular socket outlet 2-in-1, 3 pin , 5 and 15 Amps, flush type complete all as specified and directed.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make:- Wipro GARNET cat part No D532065 or equivalent Model of CG/ Philips/ Havells.

S&F Energy efficiency recessed mounted LED luminaire suitable for 2 x 2 grid ceiling along with flat diffuser along with constant current electronic driver complete all as specified and directed. Make Philips cat part No:- RC365B LED 22-5000 PSU OD WH , Type :- 919515810123 or equivalent Model of Wipro/ CG/ Havells

S&F LED Street Light fitting 45 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description. Make:- CG , Cat part No LSTP-45CDL or equivalent Model of Philips/ Wipro/ Havells.

S&F Ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed. Make:- Havells/Usha/Bajaj

Supply, installation testing & commissioning air cooled inverter based split AC unit with both heating (Auto deforst) and cooling functions, Air conditioner is electric driven single phase minimum 3 star rating of capacity 2 TR, charged with Eco friendly Refrigerant R410/R32 Gas and comes with special health filter and all connected accessories and copper tubing from indoor to outdoor and making of hole in any type of wall, including PVC drain pipe from indoor unit upto plinth protection of building , Outdoor split AC hanging wall mounted stand and flexible PVC casing pipe minimum 40mm dia covered on all exposed copper insulated pipe line and PVC wire complete all as specified and directed. Make:- Mitsubishi Electric model No :- MSZ/MUZ-HP24VA or equivalent Model of O General / Daikin/ Carrier

M&L Earthing complete with galvanised GI earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate n.less than 1.5mtr below normal.GL surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Bldg at another end GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate upto main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforced with MS bars 8mm dia @ 150C/c with both ways complete with lifting handle all as shown in electrical plate no 5 of SSR of part-I (1991) complete all as specified and directed.

S & F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed. Make : Legrand Model: 507611 or equivalent Model of Siemens / Schnieder.

S&F modular white cover plate with frame, 3 module complete all as specified and as directed. Make: Anchor Roma/ Crab tree/ Legrand

S&F modular white cover plate with frame, 6 module complete all as specified and as directed. Make: Anchor Roma /Crab tree/ Legrand

S&F modular white cover plate with frame, 16 module complete all as specified and as directed. Make: Anchor Roma Product Code:34680CWH or equivalent Model of/ Crab tree/ Legrand.

S&F sunken box suitable for modular metal flush board 3 module complete all as specified and as directed. Make: Legrand/Anchor Roma/ Crab tree

S&F sunken box suitable for modular metal flush board 6 module complete all as specified and as directed. Make: Legrand/Anchor Roma/ Crab tree

S&F sunken box suitable for modular metal flush board 16 module complete all as specified and as directed. Make: Legrand/Anchor Roma/ Crab tree

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA. Make: V-guard VG500/ Bluebird/ Everest

S & F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 240 Volts, flush to wall complete all as specified and directed.

Vishal Traders