GF 2026 27 Construction of Police Out Post Room at Bus Stand in Pennagaram Town Panchayat

Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10

Cement Concrete 1:4;8 Mix (one part cement, four part sand and eight part of aggrigate) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Supply and Fixing of 66x33x3.20 Hallow Rectangular Pipes including all labour Charges etc complete

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot

Aluminium Door Single leaf size 2.10mx1.00m Supplying fabricating and fixing in position of Alumi,Anod natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.50mm thick glazed door using rectangular AW.Box section of following sizes for frame and shutter with necessary accessories such as

ALUMINIUM TWO TRACK WINDOW SIZE Supplying fabricating and fixing in position of Alumi,Anod natural colour matt finish sliding window in two track in all floors with following sizes . All the three shutters with sliding arrangemenst the bottom section shoulld have gutter arrangements so to drain the water entring and made with extruded aliuminium section for outer frames as shown below with necessary