SPECIAL REPAIR TO BLDG NO P-274 (HQ CE (AF) PALAM OFFICERS MESS) AT AF STN PALAM IN AOR OF GE (AF) FARIDABAD

Amount

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 above here in but except bricks complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid separately).

Supply only liquid WPC complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on new surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surface and applying three coats of white wash on ceiling over one coat of primer etc complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old surfaces by removal of existing treatmen and applying three coats of white wash on ceiling over one coat of primer etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surface and applying on walls/ceiling and applying two coat of plastic emultion paint and applying one coat of wall care putty (make : Birla/JK White) for complete smooth surfce complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces on walls/ceiling surface obtain smooth finish using sand paper incl complete removal of existing treatment and apply on wall/ceiling etc and applying two coats of plastic emulsion paint over a coat of acrylic primer incl one coat of wall care putty for smooth surface as per manufactures instruction complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces on walls/ceiling surface obtain smooth finish using sand paper incl complete removal of existing treatment and apply on wall/ceiling by comp, roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surface on walls/ceiling,roof boarder, drops, fins, chajja / roof facia, column surface obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction complete all as specified and directed by Engineer-in-Charge.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' in on concrete slab 100mm complete all as specified and directed by Engineer-in-Charge.

M&L for Plain, Aluminium sheeting 0.56 mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors etc complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic colour tiles joint free in vertical surface350x250x7/ 450x350x 7/300x600x7 mm thick set andjointed in neat cement slurry and pointed in white or colour cement to match with tiles including 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface etc complete all as specified and directed by Engineer-in-Charge. Note : shade & design as approved by EIC/GE.

M&L for vitrified tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) for laying floor finishes having ulta/double charged/HD Vitrified tiles complete all as specified and directed by Engineer-in-Charge

M&L for Virified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm, in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed by Engineer-in-Charge

M&L for outdoor Virified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed by Engineer-in-Charge

M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) with mirror polishing of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified and directed by Engineer-in-Charge

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified and directed by Engineer-in-Charge

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantlingcomplete all as specified and directed by Engineer-in-Charge

M&L for Mirror polishing on marbel/granite/Kota stone/stone work where ever required to give hogh gloss finishcomplete all as specified and directed by Engineer-in-Charge

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and complete all as specified and directed by Engineer-in-Charge

M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm decorative colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and complete all as specified and directed by Engineer-in-Charge

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified and directed by Engineer-in-Charge

M&L for factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), complete all as specified and directed by Engineer-in-Charge

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face is covered with decorative face with lipping/frame to match complete all as specified and directed by Engineer-in-Charge

S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2 mm thick prelam PVC sheet on back side, supplying & fixing in frame at site as per specification & drawingand as directed by Engr-in-Charge.

M&L for aluminium Anodized powder coated fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specified and directed by Engineer-in-Charge

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed by Engineer-in-Charge

M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified and directed by Engineer-in-Charge

Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete all as specified and directed by Engineer-in-Charge Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F of floor door spring etc complete all as specified and directed by Engineer-in-Charge

S&F of door closer hydraulically regulated design No 2etc complete all as specified and directed by Engineer-in-Charge

S&F of Mortice lock vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and directed by Engineer-in-Charge

S&F of Neoprene/EPDM Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and as directed

S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and directed by Engineer-in-Charge

S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and directed by Engineer-in-Charge

S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and directed by Engineer-in-Charge

S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and directed by Engineer-in-Charge

S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and complete all as specified and directed by Engineer-in-Charge

S&F 10 to 12 mm thick frosted glass door with 08 Nos of holes and two steel hinges and steel handles not less than 300 mm long on both sides of door, incl necessary locking arrangement complete all as specified and directed by Engineer-in-Charge

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and directed by Engineer-in-Charge

S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed by Engineer-in-Charge

S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified and directed by Engineer-in-Charge

S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge

S&F in repair for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed by Engineer-in-Charge

S&F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, 300mm long, complete all as specified and directed by Engineer-in-Charge

S&F for Extruded brass handles, fabricated type polished 150 mm long complete all as specified and directed by Engineer-in-Charge

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed by Engineer-in-Charge

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed by Engineer-in-Charge

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed by Engineer-in-Charge

M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x640x680 mm, strap 220 mm withsyphonic flushing cistern with necessary fittings complete all as specified and directed by Engineer-in-Charge. Make Jaquar Cat Part No- SLS-WHT-6851S220PP/Kohler/Equalent Make.

S&F in repair wash hand basin table top of size 600x400x175 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer-in-Charge. Make Jaquar cat part No - SLS-WHT-6601/Kohler or equalent make.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge. Make Jaquar cat part No - AHS-CHR-1553.

S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings complete all as specified and directed by Engineer-in-Charge

Fix in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed by Engineer-in-Charge

S&F in repair for wall mixturer 3 in 1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flanges (Without hand & overhead shower) complete all as specified and directed by Engineer-in-Charge . Make Jaquar -Florentine (FLR-CHR-5281N).

S&F for CP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed by Engineer-in-Charge . Make : Jaquar Florentine (FLR-CHR-5167NB)

S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube of complete all as specified and directed by Engineer-in-Charge Make- Jaquar or equvelent (ALD-CHR-573)

S&F for cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs complete all as specified and directed by Engineer-in-Charge

S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints,complete all as specified and directed by Engineer-in-Charge. Make: Jaquar Cat Part No. OHS 1779 for shower and SHA 49483 for arm or equivalent.

S & F for vitrious china sensor urinals size-485x300x740 mm Make- Jaquar cat part No- URS-WHT-13255 or equvelent including all necessary fittings etc complete all as specified and directed by Engineer-in-Charge

S & F for 8 mm thick toughend frosted glass urinal partitions Make- Jaquar cat part No-1810-US or equvelent including all necessary stainless steel fitting etc complete all as specified and directed by Engineer-in-Charge

S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed by Engineer-in-Charge. Make: Jaquar Cat Part No. ACN 1131N or equivalent .

S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge .Make: Jaquar Cat Part No.ACN CHR 1111SM or equivalent.

S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed by Engineer-in-Charge . Make: Jaquar Cat Part No. ACN CHR 1121N or equivalent.

S&F for PVC connections 45/60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge

S&F in repair grating round 100 mm size of CP complete all as specified and directed by Engineer-in-Charge

M & L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engineer-in-Charge

S&F in repair of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified and directed by Engineer-in-Charge.

S & F in repair for CP towel racks with lower hanger complete all as specified and directed by Engineer-in-Charge. Make-AHS-CHR-1581H of Jaquar or equvelent.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for 20mm dia Nipple suitable for HDPE water tank.(Minimum weight 15mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel pegset of six suitable size of length etc complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm dia Decorative/ fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC/steel conduit pipes with accessories complete all as specified and directed by Engineer-in-Charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engineer-in-Charge.

M&L cutting chases in brick walls for concealed water tubbing and making good to facing where required and pointing in position in CM 1:3 cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15/16mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed..

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors etc complete incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and directed by Engineer-in-Charge.

S& F for 75 Cast Iron Cowl complete all as specified and directed by Engineer-in-Charge.

S& F for 100 Cast Iron Cowl complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

S&F for 100mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed by Engineer-in-Charge.

All as per item No 111 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed by Engineer-in-Charge. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

All as per item No 117 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed by Engineer-in-Charge.

Taking down old roof treatment in any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials complete all as specified and directed by Engineer-in-Charge.

Cleaning the internal surface areas throughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means complete all as specified and directed by Engineer-in-Charge. (a) Removal of all surface Imperfections, protrusions, loose concrete & fittings of cracks using BOSTIK-Boscocem SBR later Polymer Modified Mortar in the ration Cement : Sand (1:4) and 5% by weight of cement. (approx 210 SQM which is 30% of the total 700 Sqm Roof surface Area). (b) Supplying and applying, Bostik Elastocoat (Acryllic Based High Performance Elastomeric Waterproof Coating) single component Liquid Applied water proofing members after applying One primer coat of Bostik Sealer coat Acrylic Primer @ 100ml/Sqm. And allow the sealer coat to dry for two hrs, Apply first coat of Bostik ELASTOCOAT @ 1.5 Sqm/Lt by roller or brush on the primed surface & allow drying for 4-5 hrs before application of second coat of Bostik Elastocoat @ 1.5 Sqm /Lt. The laying of Liquid applied membrane shall be laid by the authorized & certified applicator of the manufacturer of Membrane.

M&L for 50mm thick cement concrete 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed.

M&L for cement concrete type B0 1:2:4 (12.5 mm graded agg) providing in roof kerbs or mud stops, rounded or chamfered on edges on roof complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 10mm thick on concrete surfaces in CM 1:3 with WPC and finishing the surface fair and even complete all as specified and directed by Engineer-in-Charge.

M&L Cement concret coloured tiles with cement and no pigment 30 cmX30 cm x20mm thick machine pressed set jointed and including 15mm screed bedding in CM 1:4 as pointed in neat cement slurry in flooring as cut and poslished complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-Charge.

M&L for RCC Nominal mix type B1 1:2:4 (20mm graded aggregate) in landings, chajjas,shelves and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed by Engineer-in-Charge.

All as per item No 128 as above but 6 to 8 mm dia and over and including in stirrups, spacers and binders and complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforced in of any desciption and in any position not otherwise specifically provided for (sunken floor) and concrete debris and rubbishoff to a distance n exc 100m complete all as specified and directed by Engineer-in-Charge.

M&L, for rendering 10mm thick in CM 1:4 with WPC in sunken slab complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed by Engineer-in-Charge.

M&L, cement concrete 1:4:8 D-2 (40 mm graded aggregate ) in lean concrete complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m complete all as specified and directed by Engineer-in-Charge.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed by Engineer-in-Charge.

M&L in repair for Soulwood WPC Exterior wall panelling size (2900x219x26) mm any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl L Corner, moulding end caps and necessary frame work for fixed and screws as required at site complete all as specified and directed by Engineer-in-Charge.

S&F Acrylic letters (English/Hindi) 300 mm high, 50 mm width and 3 mm depth hollow wall fixed on walls fixed on wall surface or or 3mm ACP sheets board of any description using stainless steel screws of suitable size or best quality adhesive including LED module rain proof lights fittings in each letters complete all as specified and directed by Engineer-in-Charge.

Dismantling wall ceiling and boards, (fibere pulp, insulation etc.0 or insulation boards abdy thickness including cover fitllets complete all as specified and directed by Engineer-in-Charge.

M&L for PVC hollow panelling 5 to 8 mm thick on ceilling with necessary frame work in Design POPUP pattern and any colour approved by engr-in-charge, inclusive of fixing on to ceiling incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed by Engineer-in-Charge.

M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) of approved design/pattern to flat surfaces incl all necessary MS frame work, 10 mm thick board and fittings as per standard practice and as per manufacturer's instrs reinforced with GI wire mesh incl dismantling of walls and ceiling board any type complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engineer-in-Charge.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls..

All as per item No 142 above but 5 Amp socket outlet, independent complete all as specified and directed by Engineer-in-Charge.

All as per item No 142 above but on the same board complete all as specified and directed by Engineer-in-Charge.

All as per item No 142 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable complete all as specified and directed by Engineer-in-Charge.

All as per item No 142 above but for one light point controlled by two, 2- way switch complete all as specified and directed by Engineer-in-Charge.

All as per item No 142 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 1 module complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 6 module complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame, 8 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 1/2 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 3 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 6 module complete all as specified and directed by Engineer-in-Charge.

S&F Metal Flush boxes 8 module complete all as specified and directed by Engineer-in-Charge.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed by Engineer-in-Charge.

M&L modular bell push switch, 6 A, 1 module complete all as specified and directed by Engineer-in-Charge.

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed by Engineer-in-Charge.

M&L modular Switch 16A, 6 pin, 3 module complete all as specified and directed by Engineer-in-Charge.

M&L modular Socket 16A, 6 pin, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F modular fan step regulator, 120W -2 module complete all as specified and directed by Engineer-in-Charge.

S&F bell Multi music AC 230Volts single pole complete all as specified and directed by Engineer-in-Charge. .Make Anchor/Vinay/Indo Asian

S&F ceiling rose,3 phase/PVC/Polycarbonate,isolated body after dismantling old one complete all as specified and directed by Engineer-in-Charge. Make Anchor/Fine/Indo Asian

Supply and install in replacement 1HP pressure pump single phase , voltage 230 V , 50 Hz complete all as specified and directed by Engineer-in-Charge.

M&L for Recess mounted 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED 3000k warm white for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge.

M&L for Recess mounted 15 Watt high efficancy recess LED slim square downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge.

M&L for Recess mounted 15 Watt high efficancy recess LED slim round downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB DB TPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar with incomer as 4 pole MCCB 240/430V for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engineer-in-Charge. Make: Standard/Indo Asian/Havells

Supply and install in replacement MCCB TPN fixed type 63 Amps rated with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.

Supply and install in replacement SPN enclosure including plug And socket with 16 to 32 Amp SP MCB C Curve 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan sweep 250 mm in replacement made up of sturdy engineering plastic complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed by Engineer-in-Charge.

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 2 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length) complete all as specified and directed by Engineer-in-Charge. .Make of Cable : Finolex/Polycab/Havells

M & L cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate for pole pedestal (PCC) including necessary form work etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement non-metallic junction box/street light box with three phase aluminium bus bar of suilable for 415 Volt , 50 Hz electric supply conforming to IP65 wall / pedestral mounted and including MCB SP 06 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and laying or fixing or passing through pipe in replacement 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 4 sq. mm nominal cross section in service connections complete all as specified and directed by Engineer-in-Charge.

M&L for earthing with galvanised steel plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25mtr deep from ground level) surrounded from all directions with charcoal dust, salt and edge of earth plate not less than 1.5 mtr below ground level connected to galvanised iron strip 32mmx6mm earth lead by means of nuts, bolts and washers incl excavation and earth work PCC chamber and RCC cover of 1:2:4 type B-1 using XPM weighing not less than 4 Kg/Sqmm using 20mm graded stone aggregate for coping/under covers, 20mm size GI pipe light grade for watering funnel wire mesh etc, complete all as specified and directed by Engineer-in-Charge and shown in electrical plate No-03 of SSR Part-I.

S&F in replacement street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED Street light fitting 45 W pressure die cast aluminium housing with lens and toughened glass top maintanable type , IP66 on building as secutiy light fitting ,the light fitting shall be fixed complete with all the connections all as specified and directed by Engineer-in-charge

S/Fix in replacement MCB DB TPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar WITH INCOMER AS 4 POLE MCB 240/430V for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engineer-in-Charge. Make: Standard/Indo Asian/Havells

S/Fix in replacement MCB DB SPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engineer-in-Charge. Make: Standard/Indo Asian/Havells

Supply & fixing in replacement of MCB SP 6 to 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Indoasian/Havells/Indoasian/ Schnider.

S&F in replacement of MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge. Make:- Legrand/Indoasian/Havells/Schnider.

S&F in replacement of MCB 4 pole 63 Amps 415 Volt complete all as specified and directed by Engineer-in-Charge. Make:- Indoasian/Havells/Hagger/Legrand

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length) complete all as specified and directed by Engineer-in-Charge. .Make of Cable : Finolex/Polycab/Havells

Supply , installation and testing of Energy efficient Adjustable track spotlight powder coated aluminium housing with clear glass cover for high-performance with 10 W LED 2000lm, 3000K IP20 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing bed-side wall mounted LED 3 W 3000k warm white with high efficienc LED and clear diffuser IP20 complete all as specified and directed by Engineer-in-Charge. Make Philips /Bajaj/ Havells

S&F single pole blanking plate in the existing cover plate complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing PVC conduit 25 MM dia along with accessories in surface/recess I/C or cutting the wall and making good the same in case of recessed conduit complete all as specified and directed by Engineer-in-Charge.

S& fixing LED flood light luminarie 30 W 5000 K with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection complete all as specified and directed by Engineer-in-Charge.

Supply and installation of PVC casing caping heavy duty min 40 mm wide for routing AC copper pipes and insulation complete all as specified and directed by Engineer-in-Charge.

M& L for taking down and refixing LED light of any type and rating on any surface complete all as specified and directed by Engineer-in-Charge.

M& L for taking down and refixing Ceilling fan / exhaust fan of any type and rating on any surface complete all as specified and directed by Engineer-in-Charge.

M & L for Dismantling of Split type AC 1.5/2.0 ( indoor and outdoor unit) capacity from position after including disconnecting all connections between indoor and out door units,shifting,backup refrigerant for reuse and install at a place where directed carefully,including cutting on wall,making hole and make good disturbed surface properly matching surface,inspecting,servicing and refilling refrigerant and testing complete all as specified and directed by Engineer-in-Charge.

M&L for dismantling outdoor unit only of split AC from position after including disconnecting all connections between indoor and out door units,shifting,backup refrigerant for reuse and install at a place where directed carefully,including cutting on wall,making hole and make good disturbed surface properly matching surface,inspecting,servicing and refilling refrigerant and testing complete all as specified and directed by Engineer-in-Charge.

M&L for dismantling indoor unit only of split AC from position after including disconnecting all connections between indoor and out door units,shifting,backup refrigerant for reuse and install at a place where directed carefully,including cutting on wall,making hole and make good disturbed surface properly matching surface,inspecting,servicing and refilling refrigerant and testing complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement fan rod of length 2 to 3 feet complete all as specified and directed by Engineer-in-Charge.

Material and Labour for providing insulation 9mm thick for dia 1/4",3/8",1/2",5/8",6/8" copper tubing’s from Indoor to outdoor units with foam insulation followed with clamps complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of copper tubing 10mm outer dia suitable for AC 2TR capacity complete all as specified and directed by Engineer-in-Charge.

M&L in replacement copper tubing 15mm outer dia complete all as specified and directed by Engineer-in-Charge.

Supply installation,testing and commissioning of abs Plastic body water heater 25 Ltrs thermal cutout including 02 Nos PVC pipe complete all as specified and directed by Engineer-in-Charge. Make : Havells/Jaguor

High Tech Metal India