Balance Work (Civil) and Sanitary including Boundary Wall Roads and Lawn Development for Construction of Additional Block of JKBOSE at Rehari.

Amount

Building Part

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr fron cutting edge, disposed earth is to be levelled and neatly dressed in all kinds of soil

Extra for every additional lift of 1.5mtr and part therof in execution/ banking execvated as per item no. 1a

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.Qty. already available at site.

Providing & laying in position cement concrete of specified grade 1:5:10 excluding cost of centring and shuttering all work upto plinth level including cost /carriage of material by mechanical transport.

Providing & laying in position cement concrete of specified grade 1:3:6 excluding cost of centring and shuttering all work upto plinth level including cost /carriage of material by mechanical transport.

Providing and laying Reinforced Cement Concrete M20 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto plinth level including cost /carriage of material by mechanical transport.

Providing and laying Reinforced Cement Concrete M20 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, Walls landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level including cost /carriage of material by mechanical transport.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of Centring, shuttering, finishing and reinforcement M25 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) including cost /carriage of material by mechanical transport.

Centring and shuttermg including strutting, propping etc. and removal of form for·

Foundations

Walls any thickness including attached pilasters, buttresses plinth

Suspended floors, roofs, landings, balconies and access platform.

Beams, Lintels formwork

Column formwork

Edges of slab

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in foundation and plinth in cement sand 1:6 (1 Cement : 6 Sand mix) including cost /carriage of material by mechanical transport.

Extra for brick work in super structure above plint level upto floor V level (by manual means) including cost /carriage of material by mechanical transport.

Half brick masonary with bricks of class designation 75m foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) including cost /carriage of material by mechanical transport.

Extra for half brick masonary in super structure above plint level upto floor V level (by manual means) including cost /carriage of material by mechanical transport.

Reinforced for RCC work including straightening, cuting, bending placing in position and binding all complete (TMT) including cost /carriage of material by mechanical transport.

6mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 fine sand) with making of groove in ceiling including cost /carriage of material by mechanical transport.

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) with making of groove between brick work and RCC including cost /carriage of material by mechanical transport.

20 mm Cement plaster of mix: 1 : 6( 1 cement : 6 coarse sand) with making of groove between brick work and RCC including cost /carriage of material by mechanical transport.

Extra for Plastering exterior walls of the height more than 10Mtr from ground level for every additional height of 3Mtr or part thereof including cost /carriage of material by mechanical transport.

Supply and Laying charges for Cast insitu Brick Bat concrete 1:4:8 nominal size of brick Aggregrate 40mm including curing hire and running charges of machinery, T&P but excluding cost of Brick Aggregrate (including cost of sand and cement) upto floor V level including cost /carriage of material by mechanical transport.

Providing & applying for laying of average 5" thick Brick Bat Coba on the Top Surafce of roof laid over 20mm thick Cement Mortar in mix 1:4 including filling of joints between Coba with Cement Mortar 1:4, finally top surface of Brick bat Coba covered with 20mm thick cement mortar in mix 1:4 including making of chequred tiles of size 300 x 300 over neat slurry Level 3 - Level 4 including cost /carriage of material by mechanical transport.

Providing & applying for laying of average 5" thick Brick Bat Coba on the Top Surafce of roof laid over 20mm thick Cement Mortar in mix 1:4 including filling of joints between Coba with Cement Mortar 1:4, finally top surface of Brick bat Coba covered with 20mm thick cement mortar in mix 1:4 including making of chequred tiles of size 300 x 300 over neat slurry Level 4 - Level 5 including cost /carriage of material by mechanical transport.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:2:4 (1 cement: 2 coarse sand :4 graded stone aggregate 20mm nominal size) crushed (Levelling Coarse) including cost /carriage of material by mechanical transport.

Providing and Applying water proofing of Top-Surfaces of roof/sunken portion with 1E proof coat black with fibre net of Pidilite Industry Ltd.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase including cost /carriage of material by mechanical transport.

Making khurras 45x45 em with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete including cost /carriage of material by mechanical transport.

Providing and fixing Kota Stone flooring over 20mm thick base laid over & jointed with grey cement slurry mix with pigment to match the shade of slab incl. rubbing and polishing complete with cement mortor 1:4 including cost /carriage of material by mechanical transport.

Kota Stone slab 25mm thick in risers of steps, skirting, dodo and pillars laid on 12mm 9avg.) thick cement mortor 1:3 (1Cement : 3Coarse Sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete including cost /carriage of material by mechanical transport.

Providing and fixing gang saw cut mirror polished (pre moulded and pre Polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels 16mm thick 16mm thick Granite of any colour and shape as approved by engineer-in-charge. (Area of slab 0.5sqm) 16mm including cost /carriage of material by mechanical transport.

Extra for providing edge moulding to 16 mm thick granite stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work including cost /carriage of material by mechanical transport.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm including cost /carriage of material by mechanical transport.

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete including cost /carriage of material by mechanical transport.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeering in Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete including cost /carriage of material by mechanical transport.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer (Exterior) including cost /carriage of material by mechanical transport.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. including cost /carriage of material by mechanical transport.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Conpound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats

Finishing walls with Texture Exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/ 10 sqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm)

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6mm for diagonal braces

Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to 18:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) Tsections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed tomain runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminum frame work shall be paid seperately) including cost /carriage of material by mechanical transport.

Strctural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost /carriage of material by mechanical transport.

Providing and Fixing Precoated Galvanised Iron Prefic Sheets (Size, Shape, and Pitch of corrugation as approved by Engineer in-charge) 0.5mm + 1-5% total coated thickness (TCT), Zinc coating 120gsm as per IS 277 in 240mpa Steel grade 5.7 microns epoxy primer on both sides of sheet and polyster top coat 15-18 microns sheet should have protective gaurd film of 25 microns minimum to avoid scratches while transprotation and should be supplied in single length upto 12Mtr or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55mm) with EPDM seal on with polymer coated J&L hvoles, bolts & nuts 8mm diameter with bitumen & GI Limpet Washer or GI Limpet washer filled with white lead complete upto any pitch in horizontal/ vertical on curved surfaces cutting to size and shape whereever required including cost /carriage of material by mechanical transport.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost /carriage of material by mechanical transport.

Providing and Fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture incl. Providing & Fixing Top & Bottom pivot and spring type fiering arrangement and making necessary holes etc. For fieing required door fittingd all complete as per direction of Engineer-in-charge , door handles, lock & stoppers etc to be paid saperately including cost /carriage of material by mechanical transport.

Applying Priming coat with ready mixed pink & grey primer of approved brand and manufacture on wood work (hard and soft wood) including cost /carriage of material by mechanical transport.

Painting with ready synthetic enamel paint of approved brand and manufacturein all shade to give an even shade (Asian Paint) on (new work two or more coat) including cost /carriage of material by mechanical transport.

Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour/ shade of wall treatment, Aluminium fluted strips 3.15 mm thick, 200mm wide (complete item) Expension Joint including cost /carriage of material by mechanical transport.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standardtubular sections/appropriate Z.sections and othersections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separatelyPowder coated aluminium (minimum thickness kg 453.15 of powder coated 50 microns) including cost /carriage of material by mechanical transport.

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. including cost /carriage of material by mechanical transport.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 8.0 mm thickness (weight not less than 10.00 kg I sqm) including cost /carriage of material by mechanical transport.

Filling the gap between Aluminium Frame and Adjacent RCC/ Brick/ Stone work by providing weather silicon sealent over bakers rod of approved quality as per Achitural drawing and direction of engineer incharge complete upto 5mm depth and 5mm width including cost /carriage of material by mechanical transport.

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed including cost /carriage of material by mechanical transport.

Providing and fixing lSI marked aluminium butt hinges lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 75x63x3.2 mm including cost /carriage of material by mechanical transport.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete 125 x 90 x 4.00 mm including cost /carriage of material by mechanical transport.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete 100 x 75 x 3.50 mm including cost /carriage of material by mechanical transport.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete 75 x 60 x 10 mm including cost /carriage of material by mechanical transport.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 250 x 10 mm including cost /carriage of material by mechanical transport.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete 150 x 10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete 100 x 10 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 10" Long

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 6" Long

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 4" Long

Providing & fixing aluminium hanging floor door stoppers ISI marked anodized (annodic coating not less than grade AC 10 as per IS: 1368) transparent or dyed to required colour or shade with necessary screw etc. Single rubber stopper

Providing & fixing aluminium hanging floor door stoppers ISI marked anodized (annodic coating not less than grade AC 10 as per IS: 1368) transparent or dyed to required colour or shade with necessary screw etc. Double rubber stopper

Providing & fixing I-Hooks complete including required screw etc.

Providing & fixing aluminium Aldrop 300mm including required screw etc. complete item

Supply and stacking of good earth at site including royality and carriage (earth measured in stack will be reduced by 20% for payment including cost /carriage of material by mechanical transport.

Rough dressing of trenched ground including breaking clouds

Fine dressing of ground

Supply and stacking of dump manure from badi or other approved source including carriage upto 1km (manure measured in stacks will be reduced by 8% for payment) screen through sieve of I.S designation 20mm including cost /carriage of material by mechanical transport.

Mixing earth and manure in proportion specified or directed by officer in charges

Rebaring for 12mm and steel bars including cost of chemical used for packing of 12mm dia steel but excludingcost of 12mm steel bar

Demoloshing cement concrete manually by mechanical means including disposal of material within 50mtr lead (1:4:8) mix

Removal of malba/building rubbish from designated sites and its disposal as per direction of engineer-in-charge, all inclusive

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material 50m lead (in cment mortar)

Demolishing of half brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material 50m lead (in cment mortar)

Removing mortar from bricks and cleaning bricks including stacking within lead of 50m (stacks of clean bricks shall be measure) from brick work in cement mortar

Taking out doors, windows & shutters (steel and wood) including stacking within 50m lead. Area of 3sqm and below

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed in all kinds of soil 70% ordinary rock 30% for approach road.

Preparation of sub grade by excavating earth to an average of 22.5cm depth dressing to camber and consolidation with road roller including making good the undulation etc and disposal of surplus earth upto 50mts

Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc with earth or quarry spoils etc and rerolling the subgrade

Laying water bound macadam with specified stone aggregate stone screening and blinding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonee capacity etc complete including supply of stone aggregate with base course with 63mm to 45mm size including stone screening 13.2mm size

Laying water bound macadam with specified stone aggregate stone screening and blinding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonee capacity etc complete including supply of stone aggregate with base course with 53mm to 22.4mm size including stone screening 11.2mm size

Supply and stacking of stone screening/ chipping at site excluding carriage

Providing and applying tack coat using hot straight sun bitumen of grade 80/100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaing and preparing the existing road surface as per specification

2.5 em premix carpet surfacing with 2.25cu.m. and 1.12 cum of stone chippings of 13.2 mm and 11.2 size respectively per 100 sq.m. and 52kg. and 56 kg. of hot bitumen per cu.m. of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt including cost /carriage of material by mechanical transport.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80/100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete including cost /carriage of material by mechanical transport.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class Deodar wood including cost /carriage of material by mechanical transport.

Providing and fixing lSI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size including cost /carriage of material by mechanical transport.

Extra for providing and fixing flush doors with decorative veneering instead of non:decorative IS marked flush door shutters conforming to lSI: 2202 (Part-1) On one side only

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)

Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed butt hinghes brought finished of required size with necessary screws excluding panelling which will be paid for seperately all complete as per direction of engineer-in-charge 2nd class deodar wood

Providing & fixing of float glass panes 5.5mm thick of superior quality Saint Gobind/Modi or equivalent.

Extra for providing heavy sheet glass panes instead of ordinary float glass in glazed doors, windows and clerestory windows shutters (area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws second class deodar wood

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x20mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings I wooden frames with rawl plugs screws etc.

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolt, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm (1:3:6) mix (1cement : 3coarse sand : 6graded stone aggragated 20mm nominal size)

Plumbing/Sanitary

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers.

Providing and Fixing Vitreous China Pedestial for Wash Basin completely recessed at the back for the reception of pipes and fitting of make Hindware/ Cera/ Jaquar or as approved by the site Engineer

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre P.V.C white automatic flushing cistern of approved quality

Providing and fixing 100 mm CP grating for gully, floor or Nahani trap.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 1500 x 450 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing toilet paper holder C.P. brass

Providing and fixing PVC pipes of following dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent

160 mm dia

110 mm dia

75 mm dia

Providing and fixing PVC Door bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:

160 mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent

100 mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent

75 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC plain bend of required degree:

160 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent

100 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent

75 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent

Providing and Fixing PVC Door Tee with PVC Access Door, insection rubber washer 3mm thick, bolts and nuts complete 100mm Tee

Providing and fixing single unequal junction of required degree with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC offsets working pressure 6kg/cm2 of make Supreme, finolex or equivalent

76 mm off sets. With 75 mm dia. Pipe

76 mm off sets. With 100 mm dia. Pipe

152 mm off sets. With 75 mm dia. Pipe

Providing and fixing PVC collar:

160mm working pressure 6kg/cm2 of make Supreme, finolex or equivalent

100mm working pressure 6kg/cm2 of make Supreme, finolex or equivalent

75mm working pressure 6kg/cm2 of make Supreme, finolex or equivalent

Providing and Fixing PVC P/S/F trap of different dia working pressure 4kg/Sqcm of make Supreme, Finolex

Providing PVC solution joints of diameter

Providing and Fixing PVC Cowl of make Supreme & finolex

Providing and fixing Soap dish (C.P. brass) with bracket

Providing and fixing towel ring (C.P. brass)

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:

15 mm dia. nominal bore (medium)

20 mm dia. nominal bore (medium)

25 mm dia. nominal bore (medium)

32 mm dia. nominal bore (medium)

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)

32 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 25mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore

Providing and fixing C.P. Jet with connection pipe

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass close hole basin mixer centre hole of approved quality and make, weighing not less than 1.970 kg 15 mm nominal bore of standard back type.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design Inside size 90x80 em and 45 em deep including C.l. cover with frame (light duty) 455x61 Omm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 em in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G. I. pipe etc.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. 100 mm diameter S.W. pipe

Providing installation and testing of submersible pump of approved quality and manufacture Sharp/ Crompton Greeves/ Havels or equilant incuding all fittings complete item 1 H.P (OWM22SS)

Providing installation and testing of submersible pump of approved quality and manufacture Sharp/ Crompton Greeves/ Havels or equilant incuding all fittings complete item 2 H.P (OWM22SS)

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 em dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

ADITYA CONSTRUCTIONS

M/S MAGOTRA ENGINEERS and CONTRACTOR

KARNAIL SINGH