Renovation of common toilets inside the factory premises, HAL Nashik Factory areas. Civil and Electrical works

Essential/ Prequalification Criteria

Annual Turnover: Average annual financial turnover during the last 3 years, ending 31.03.2024 should be at least 30% of the approximate estimated amount put to tender. (i.e ₹ In Lakhs)

Turn over (Rs. In Lakhs)

Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year.

Solvency : The solvency required will be 40% of the approximate estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 Months from the final date of submission of the tender i.e ₹ In Lakhs

Related Document to be Uploaded to eProcurement Portal.

Not meeting eligible criteria

Experience Experience of having successfully completed similar works(Refer NIT "Work Details") during last 7 years ending on the previous day of last day of submission of tender should be either of the following: [Latest work experience certificate may be uploaded] a) Three similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender against each work in the tender notice. (Or) b) Two similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender against each work in the tender notice. (Or) c) One similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender against each work in the tender notice.

80% (One Work)

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

GST No Registration Number.

ESIC Registration Number

EPF Registration Number

Bid Capacity ( 2AN-B)

Number of years prescribed for completion of subject project / contract

Value of the work executed in last five Financial years (Financial year wise)

Related documents to be uploaded in eprocurement portal.

B = value at current price level of existing commitment and ongoing works to be completed in the next ‘N’ years. Works on hand to be uploaded and this statement should be submitted duly verified by Chartered Accountant.

Integrity Pact (IP)

Earnest Money Deposit (EMD) details

License: License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies.

Documents to be uploaded along with tender

Constitution, legal status along with attested copies of Deeds / Articles and Memorandum of Association, etc., as applicable.

Power of Attorney in case of Pvt. Limited/limited companies

Details of person holding the power of Attorney.

Related Document to be Uploaded in eProcurement Portal. (Original /Attested / Notarized)

Registration with HAL/ Other organization if any.

Copy of PAN card issued by Income tax authority

I.T Returns for past 03 years (Assesment Year)

Related documents to be uploaded in eprocurement portal.

Details of ECS viz.,where payments are to be credited along with the scan copy of Blank Cheque leaf

Blank Cheque leaf to be Uploaded in eProcurement Portal.

ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal.

Annual turnover for last Five years

Plant and machinery details for the work.

Proposed work completion schedule in the form of bar- chart.

Bank Balance statement for last three months.

Related documents to be uploaded in eprocurement portal.

Overdraft facilities available with the agencies.

Balance sheet for the last Five years

Related documents to be uploaded in eprocurement portal.

Work on hand

Udertaking Annexure-K

Address for correspondence:

Contact details

Acceptance by party for Scope of work as per BOQ and Tender terms & conditions

DECLARATION

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions (Page 1 to 175) including price bid do hereby accept all the terms and conditions laid down.

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.

Specification

Dismantling tiling work in floors and roofs laid in cement mortar including stacking the dismantled material within 50 metres lead , for thickness of tiles varies from 10 mm to 25 mm etc all as specified and as directed EIC.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of un-serviceable material within 50 metres lead as per direction etc all as specified and as directed EIC.

Demolishing cement concrete Nominal concrete 1:4:8 or leaner mix , including equivalent design mix by manual or mechanical means including disposal of debris material within 50 metres lead as per direction of Engineer - in - charge. etc all as specified and as directed EIC.

Earth work in surface excavation for all kinds of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan areas including getting out and disposal of excavated earth upto 50 m lead and lift up to 1.5 m etc., complete as directed by Engineer-in-Charge:

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. etc all as specified and as directed EIC.

Carriage of materials by manual labour including loading , unloading and stacking for lead less than 0.50 KM etc., lime, murrum ,building rubbish etc., complete as per the direction of EIC. For additional 450 m lead.

Carriage of materials by manual labour including loading , unloading and stacking for lead less than 0.50 KM etc., for tiles etc., complete as per the direction of EIC. For additional 450 m lead.

Providing and rendering 12mm thick plain cement plaster in cement morter 1:6 on fair faces brick work or concrete surface etc complete as specified and as directed by EIC

Providing and laying Polished Granite stone slabs/tiles of approved colour and texture in flooring, steps, sills, door frames etc in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing edge moulding to 18 mm thick Granite work marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and laying Vitrified tiles in wall /dadoos of Tile size 600x600 mm (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting & finishing the joint with white cement & matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying Glazed Vitrified tiles in floor of size 600 x 600 mm with Matt/Antiskid finish (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc. complete as per direction of Engineer-in-Charge.

Providing and fixing brass stop cock of approved quality of 15 mm nominal bore etc. complete as per direction of Engineer-in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. For Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia. Pipes.

20 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes in external wall works having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge .

25 mm nominal outer dia. Pipes.

32 mm nominal outer dia. Pipes.

Providing and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 etc. complete as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet W.C. pan with ISI marked white solid plastic seat and lid (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : etc. complete as per direction of Engineer-in-Charge.

Providing and fixing water closet squatting pan White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Indian type W.C.pan ) with 100 mm P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: etc. complete as per direction of Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. :

Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps, brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete as per direction of Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 100 mm nominal dia. PTMT grating of approved quality and colour Circular type etc. complete as per direction of Engineer-in-Charge.

Providing and fixing Rectangular shape 1500x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board backing fixed to wooden cleats with C.P. brass screws and washers complete etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) including ISI marked Stainless Steel butt hinges of suitable size conforming to IS:12817 , heavy duty with necessary screws, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 200 mm stainless steel fancy design handle of approved make, fancy design fixed with Stainless Steel screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing 250x16x5 mm bright finished brass door latch /aldrop of approved make fixed horizontal or vertical with necessary screws etc. complete as per direction of Engineer-in-Charge.

Providing & fixing of 4.0 mm thick glass panes finished with glass putty or glazing clips in steel /aluminium doors, windows, ventilator etc. complete as per direction of Engineer-in-Charge.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides with necessary finishing etc., complete as per the direction of EIC.

Providing and fixing aluminium work Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : etc. complete as per direction of Engineer-in-Charge.

Providing and applying white cement based putty including preperation of surface of average thickness 1 mm, of approved brand and manufacturer, over the plastered surface to prepare the surface even and smooth etc complete all as specified & directed by EIC.

Providing & applying two coats Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. etc. complete as per direction of Engineer-in-Charge.

Providing & applying 20 mm thk cement plaster of mix : 1:4 (1 cement: 4 fine sand) including finishing , curing etc. complete as per direction of Engineer-in-Charge.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. The work completed shall have the Gurantee period of 5 or /10 years & the agency shall submit the Gurantee Bond in suitable Stamp paper duly signed . The retention money for this item of works shall be released on completion of gurantee period etc., complete as directed by the EIC.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI and conforming to IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified & directed by EIC.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be

Providing and fixing white vitreous electrically operated (excluding wiring) of make EURONICS EU-77BE touchless urinal sensor of urinal approx. size 290mm x 320mmx 620 mm having[ Urinal with inbuilt automatic Flusher] self flush Infra-red Sensor + Manual Push Button , pre & post flushing with water (220 ml & 400 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. ( Rate as per Quotation)

Supply and installation of SPN 4 way Double Door MCB Box with DP MCB C Curve 32Amps -1 No & SP MCB C Curve 10 Amps - 2 nos and SP MCB C Curve 20 Amps - 2 nos and Blanking Plates where MCB are not used. Make: Legrand/Havells/Siemens/L&T.

Supply and Installation of Recessed Mounted LED Luminarie 36 Watt suitable for 600 mm x 600 mm false ceiling complete with lock chain and J-hook for hanging support from ceiling. The Ingress Protection of the LED Luminarie shall be minimum IP20. The diffuser material shall be Acrylic.The driver efficiency shall be >/=85. The color rendering index (CRI) shall be >/=80. The beam angle should be >/=85 The Luminarie shall be compliance to Indian Standards. Make of the LED Luminarie -Philips/Wipro/Havells/Bajaj

Supply, Installation and Testing of Integral, SMD LED, IP40, 36W, 4 Feet ,Surface/Suspended Mounted LED Batten with System efficacy of more than equal to 110 lm/W. The LED luminaire shall have sleek design with Extruded Anodized Aluminium Section. The luminarie should have reflector. The luminaire shall have High Optically Efficient Polycarbonate Diffuser for Uniform illumination and precise light distribution. The LED Driver should have proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection, . The Luminarie shall be compliance to Indian Standards. Make of Luminarie : Wipro/Bajaj/Havells/Philips

Supply and Installation of Industrial Exhaust Fan, Steel body, Single Phase AC 230V of size 300 mm sweep with blades, frame and louvers with all necessary bracket for installation on wall, steel structure etc. Make : Almonard/Crompton

Supply, Installation, Testing of Concealed Point Wiring for Light/ Exhaust Fan/ Urinal Sensor/Wash Basin Sensor with 2 runs of 1.5 sqmm 1100 V grade FRLS PVC insulated copper conductor single core cable for Phase and Neutral including and through 20 mm dia, Medium Class PVC Conduit concealed including all junction boxes ( 1 to 4 way) , tee, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers ,lock nuts, saddles, pipe hooks etc complete up to first point with 6A Modular Switch, Modular Plate with Frame , suitable size GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated 1100V grade copper conductor single core cable along with all necessary fixing accessories like mounting screws etc.The wiring should confirm to 732 :1982. Make of Modular Switch, Modular Plate : Anchor Roma/MK. Make of FRLS copper wire : Polycab/Finolex/Havells. Make of PVC Conduit : Precision/Press Fit . Note : The measurement will be counted point wise. One Switch controlling one light/Exhaust Fan will be counted as one point. Note : This is Concealed Wiring. Note :Sub Main Wiring not included in this Item

Supply, Installation, Testing of Concealed Point Wiring for Added Light Point/Urinal Sensor/Wash Basin Sensor with 2 runs of with 2 runs of 1.5 sqmm 1100 V grade FRLS PVC insulated copper conductor single core cable for Phase and Neutral including and through 20 mm dia, Medium Size PVC Conduit recessed including all junction boxes ( 1 to 4 way), tee, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete controlled from existing switch and earthing the added point with 1.5 sq.mm FRLS PVC insulated 1100V grade copper conductor single core cable . The wiring should confirm to 732 :1982. . Make of FRLS copper wire : Polycab/Finolex/Havells. Make of PVC Conduit : Precision/Pressfit. This is Concealed Wiring .

Supply And Fixing of Recessed mounted Modular Switch 16A with indicator And Socket 16 A-2/3 Pin Combination 2 Module Type On Modular White Cover Plate With Frame and Modular Metal box ( Make : Anchor-Roma / MK/Legrand ). Sub Main Wire is not included in this Item.

Supply, Laying & Drawing Wiring For Concealed Sub Main Wiring alongwith Earth Size of sizes 2 x 2.5 sq.mm for Phase and Neutral + 1 x 1.5 sq.mm Earth Wire of FRLS PVC Insulated Copper Wire including and through concealed Medium Class PVC Conduit. Make of PVC Conduit : Precison/Pressfit . This is Concealed Wiring

Supply and Installation of Air Dryer for hand drying. The Air dryer should be operating on 230 V , 50 Hz. Of Power Rating 2500 Watt , RPM 5500 , Protection Level IP23. Make : Euronics/ABS Hand Dryer/Dolphy/Orchids

Laying of Concealed LT Cable Aluminium Armoured Cable from entry of the Toilet Room upto the Main DB of size 2/ 4 Core x 10 sqmm/ 2/4 Core X 6 sq.mm Cable concealed with all accessories required with termination of the Cable including gland and heavy duty aluminium lugs for cable size 4 Core x 10 sqmm/ 4 Core X 6 sq.mm Cable with all accessories l including earthing of gland etc. Make of Gland : Approved by EIC .Make of Lug : Approved by EIC. Note : The LT Cable Aluminium Armoured Cable will be supplied by HAL.This is Concealed Cabling.

Removal of following existing electrical items from the Toilets under renovation : 1) Switch Boards 2) MS Conduits/ Casing Capping 3) Copper Wires of Light Fittings and Exhaust Fans 4) Tube Light Fittings (2 x 36 Watt , 1 x 36 Watt) 5) Industrial Exhaust Fans (300 mm, 450 mm) 6) Incoming Cable to Switch Board from inside the Toilet Room upto Switch board ( 2 core x 6sq.mm, 2 core x 10 Sq.mm, 3 core x 10 sq.mm). The electrical items to be removed with proper care and store at place as directed by Engineer-in-Charge.

Rupees Four Crore Thirty Nine Lakh Ninety Five Thousand One Hundred Ninety Seven and Thirty Six Paise Only

Approximate Basic Amount Put to Tender

Rupees Seventy Nine Lakh Nineteen Thousand One Hundred Thirty Five and Fifty Two Paise Only

Rupees Five Crore Nineteen Lakh Fourteen Thousand Three Hundred Thirty Two and Eighty Nine Paise Only