Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52,300Accepted-Finance | L1 | Accepted-Finance being lowest | |
| 2 | L2₹55,900+₹3,600 (6.88%)Rejected-Finance INDUSTRIAL ESTATE DIGIANA JAMMU | L2 | Rejected-Finance not lowest | |
| 3 | L3₹57,570+₹5,270 (10.1%)Rejected-Finance OPP INDUSTRIAL ESTATE DIGIANA JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | L3 | Rejected-Finance not lowest |
Tender Value
₹58,000
EMD Value
₹1,160
Closing Date
27 Dec 2023, 2:00 pmClosed
Executive Engineer
MID JAMMU
Fabrication installation testing and commissioning of new Cross Gate near Military with allied works
2023_IFC_240050_1
MID/J/e-NIT/2023-24/121
Open Tender
Repair and Maintenance Works
Item Wise
20 days
Military gate
as per eNIT
8 documents required · 8 mandatory
₹200
EXECUTIVE ENGINEER MID JAMMU
₹1,160
Yes
MID Jammu
15 Jan 2024
13 Dec 2023
28 Dec 2023
13 Dec 2023
27 Dec 2023
15 Dec 2023
14 Dec 2023
Fabrication installation testing and commissioning of new Cross Gate near Military with allied works.
Cross Gate near Military (1.75 meter x 1 meter ) Fabrication of gate leaf frame of size (1.75 meter X 1 meter) (approx.) using the ISMC channel of 75X40 MM size with requisite no. of cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5 mm thickness on the frame of channel structure and finishing the gate structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing/fixing of seal of size as per required match of bottom of leaf frame by way of nut bolts /rivets or MS flat for securing the seal with the leaf. Job includes fabrication providing and fitting of hoisting channel-02 no with anchoring it with 2 no. bolts on each side .fitting of guide channels of MS Channel 100x50 mm of approx. length 3.5 meter and proper anchoring in the PCC. Fabrication, providing & fitting of 02 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of suitable size and one stem rod duly threaded along its length for up down movement of the gate and then oiling and greasing the gear mechanism/ stem rod before fitting. job also includes drilling of holes on new fitted top hoisting channels, L clamps, base plate for fixing winch machine and stem rod. Complete painting of gate structure and the winch machine by way of Providing two coats of superior quality paint after applying one coat of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Job includes cleaning of side channels and proper oiling/greasing. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod. Connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges, excavation and testing for its smooth operation at site.
M/S V.N ENGG WORKS
AJAY ELECTRIC AND MECH WORKS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .