Renovation works at Atal Bhujal Yojna seated at 6th Floor , MTNL Building , CGO Complex New Delhi

ABSTRACT OF COST

S No DESCRIPTION Cost of Non-DSR Items

(a) DISMANTALING 12234.25 13750.00

PARTITION AND WALL

(g) FURNITURE 0.00 571062.00

3 ELECTRICAL WORKS

(b) LIGHTING FIXTURES 53166.00 54752.00

GRAND TOTAL 1795087.63

GRAND TOTAL 1795087.63

Digitally signed by AMIT

SINGH 20:25:53 IST

Interior firout works at Ministry of Jal Shakti ( Atal Bhujal Yojna) at MTNL Building

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE MR AMOUNT

(a) DISMANTALLING

15.23 Dismantling tile work in floors and roofs laid in cement mortar including

1.01 15.23.1 stacking material within 50 metres lead or dispose off as per instruction of Engineer's IN charge sqm 48.5 60.50 2,934.25

15.23.1 For thickness of tiles 10 mm to 25 mm

Dismantalling of furniture including stacking material within 50 metres lead or dispose off as per instruction of Engineer's

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantalling of electrical wiring and fixtures including stacking material within 50 metres lead or dispose off as per

instruction of Engineer's IN charge

Demolishing of existing ductwork of all sizes, Insulation, Diffusers, Grilles, dampers in complete respect and clean the

ceiling for new ductwork as per the new RCPs, Zones, Spaces marked in the drawings. The contractor to examine and

1.05 MR ensure no damage to other services like electrcial, lighting fixtures, smoke detectors, structure etc running in the ceiling sqm 15 250.00 3,750.00

shall be made. The contractor shall be responsible to clean and shift the uninstalled ductwork and place it on the

ground at the location suggest by PMC/Engineer In Charge. NO extra cost shall be paid in any manner.

(b) PAVING AND WET WORKS

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of

2.01 11.3 neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

2.02 11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 8 545.00 4,360.00

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm

thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete.

WOODEN FLOORING

25 mm wooden planking, tongued and grooved in flooring, including fixing

with iron screws complete with

11.33.1 Second class teak wood

© PARTITION AND WALL CLADDING

PLYWOOD PANELLING- Plywood panelling using 12mm fire retardant Ply fixed on one side on Aluminium Frame 50mm x

3.01 MR 25mm as per approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor and RCC Ceiling sqm 40 3,007.86 120,314.49

using fastners.

PLYWOOD PARTITIONING- Plywood partition using 12mm fire retardant ply fixed on both sides on aluminium Studs

Frame 50mm x 50mm x 0.5mm & 50mm x 60mm x 0.5mm as per approved sample and architectural drawings

placing the same 600mm c/c . Aluminuim frame to be fixed to floor and RCC Ceiling using fastners.

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. toughened glass with anodised

Aluminium frame fixing glass with snap on option consisting of top, bottom and side frame measuring 40-46mm x 18mm-

25mm complete with glazing rubber as per manufacturer's specifications and instructions of Engineer- in-charge. Rate

3.03 MR include supply & Installation of 12 mm thk toughened glass with double sided adhesive tapes for glass to glass butt sqm 8 3,500.63 28,005.01

joints. Partition system from FFL to False Ceiling level, inclusive of cost of support required for fixing in the ceiling. The

frame to be powder coated in desired shade as per the instructions of the Architect.

LAMINATE & MDF CLADDING- P/F 1mm thick laminate over, and including 4 mm thick MDF, on an existing

Plywood surface, in desired pattern with 4mm thick grooves complete as per the detail drawings. The item to

3.04 MR includee cleanng and finishing the grooves with paint. The works to be done as per directions of engineer-in- sqm 30 1,403.23 42,096.87

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density

48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers and held

and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.

Supply & installation of Storage Low height storage (670X450X900mm)( as per direction of Engineer Incharge)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture

withfollowing process in the sequence as detailed below:

. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed

to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer

layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine

3.07 13.116 fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light Sqm 30 1,156.55 34,696.50

wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with

spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24

hrs then this dry surface is again fine wet rubbed smooth,

which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray

gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of

Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with

6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of

26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and

two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as

per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 38 1,145.95 43,546.10

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings hung from

4.02 MR ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm thk. Commercial ply on rmt 12 1,032.07 12,384.84

horizontal surface (straight & curved). Inclusive of finishing in Paint.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making

necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer- incharge.

5.02 MR Supply & fixing of H - type handle for glass door set 1 1,798.00 1,798.00

PRIMER: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Water thinnable cement primer.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS

6.02 13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with

silicon additives.

New work (Two or more coats applied @ 1.43 litre/

10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top tube of 38mm diameter, powder coated

bottom bar, with suitable roller clutch mechanism and plastic ball chain. The Roller Blind fabric should possess the below

mentioned specifications with fabric made up of 85% Polyester and 15% Catonic Polyester. Roller blinds with Solar

protection fabric of high tenacity Polyester Yarn & Fungi static Treatment and should block the light flux & offer

elimination of glare and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness

0.32mm ±5% (ISO 2286-2) and weighing 210g/sm±5%. Flame Retardancy as per AS301.3-1999. Fabric Protected by teflon

fabric protector for water and stain resitance. Harmful substance standard Oeko-tex standard 100. Constrruction of

fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP consisting of alloy 63400 along

with anodizing of 10 micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm

square and elongation 18.The control clutch drive unit engineered heavy duty chain drive pulley operating system

consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into

6.03 MR roller tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick sqm 25 3,286.00 82,150.00

manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven

by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear

ratio of 1.75:1 for reduced operating force on larger blinds.. Mounting hardware brackets universal brackets including

end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of

stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP.

Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm diameter cord

with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic

parts all plastic components are UV-stable compounds available white.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS warranty as approval

of the Architect. (Only film surface area shall be measured and paid).

MAIN TABLE -1200 x 650 x 750 ht., SIDE TABLE - 950x450x 750 ht. PLPB board with laminate finish to enhance scratch

resistance and having superior edge profile supported on Gable ends made out of 25 mm PLPB Laminate. Modesty

panels are in 18mm thk PLPB laminate finish. Side table of size950X450mm made up of 25mm thk. PLPB board with

laminate finish to enhance scratch resistance and having superior edge profile supported on Gable ends made out of

7.01 MR 18mm thk mdf boards . Modesty panels are in 18mm thk PLPB laminate finish. nos 1 76,525.00 76,525.00

In this cabin furniture set all tops, Modesty, Separate provision for mounting switches on the wall adjoining the tables

shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management

groumets shall be provided on main or side table as specified by customer.

PROJECT DIRECTOR CABIN

MAIN TABLE -2050 x 1100 x 750 ht., SIDE TABLE - 1500 x750x 725ht. & Main

table of size 2400x1050x750mm made up of 36mm thk. PLPB aminate finish to enhance scratch resistance and having

superior edge profile supported on die cast chrome finished legs of 50X50mm. Modesty panels are in 18mm thk PLPB

laminate finish. Side table of size

1500x750x725mm made up of 25mm thk. PLPB board with laminate finish to enhance scratch resistance and having

7.02 MR superior edge profile supported on Gable ends made out of 18mm thk mdf boards . Modesty panels are in 18mm thk nos 1 130,000.00 130,000.00

PLPB laminate finish.

In this cabin furniture set all tops, Modesty, and Pedestal Facia are all in laminate finish. Separate provision for mounting

switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting

facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer.

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm

Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with

leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per

IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu

molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W

cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular

armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is

height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360°

revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt

7.03 MR tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the nos 2 37,416.00 74,832.00

chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth

adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back

frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort

the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of

10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The

pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in

plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and Placing Medium Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1

cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered

with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as

per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu

molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W

cm x 55.5 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular

armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is

height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360°

revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt

7.04 MR tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the nos 5 13,500.00 67,500.00

chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth

adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back

frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort

the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of

10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The

pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in

plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Two seater Sofa set With Chrome Legs. Amazing, affordable style arrive in the form of this easy-care fabric Sofa.

Constructed of high performance easy-care upholstery that is as subtle and it is durable, this couch is alluringly designed

with a contemporary edge. This savvy furnishing features box spring seats that provide for sturdy comfort and is outfitted

with sleek barrel shaped chrome color legs that elevate the height seating solution providing for a more modern

look.Fabric Collection: Green | Brown | Blue. Sofa dimensions: 72.5

Three seater Sofa set With Chrome Legs. Amazing, affordable style arrive in the form of this easy-care fabric Sofa.

Constructed of high performance easy-care upholstery that is as subtle and it is durable, this couch is alluringly designed

with a contemporary edge. This savvy furnishing features box spring seats that provide for sturdy comfort and is outfitted

7.06 MR with sleek barrel shaped chrome color legs that elevate the height seating solution providing for a more modern nos 1 75,000.00 75,000.00

look.Fabric Collection: Green | Brown | Blue. Sofa dimensions: 78.5in.

7.07 MR Providing And Placing Side Table Size 900x450mm For cabin As per directions of Engineer-in-Charge. nos 1 9,405.00 9,405.00

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting

complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved

8.01 16.12.1 drawings and specifications of following sheet thickness complete as required. sqm

supply, installation, balancing and commissioning of casate ac as per approved make as per direction of engineer in-

8.02 MR P/F of 1.5 TR Cassttee AC nos 1 65,020.00 65,020.00

8.03 MR P/F of 2.0 TR Cassttee AC nos 2 80,026.00 160,052.00

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of inter connecting refrigerant piping with

insulation. Duly insulated with closed cell polyethylene foam insulation of 30 (+/-3) kg/m3 density and fire rated Class 1

as per BS 476 Part 7. All the refrigerant pipe in outside exposed area shall be provided with the protective coating,

confirming to UL 723 or ASTM E-84 (Star bond - Paramount). The coating method shall strictly followed according to

supplier's TDS etc. All piping inside the room shall be properly supported with MS hanger/tie rod . Refer teder

specifications for details description.

a) MR 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) rmt 37.5 551.00 20,662.50

b) MR 12.7 mm O.D (insulation : 13 mm ) rmt 37.5 459.00 17,212.50

Supply, installation, testing and commissioning of Rigid heavy class PVC piping with minimum 6 mm nitrile rubber

8.05 insulation over the pipes, complete with fittings, supports, U trap arrangement, clean plug and accessories for units as

per specifications and technical specification.

Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner

8.06 and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ,

specifications and schedule, complete as required.

a) MR 2C X 1.5 sqmm copper conductor rmt 75 125.00 9,375.00

Supply, installation, testing and commissioning of MS fabricated outdoor unit stand for placing outdoor unit of VRV

8.07 MR system. The stand shall be manufactured from MS C channel of minimum 3-4 mm thick. It shall be finished with enamel nos 3 1,251.00 3,753.00

paint as per client/architect approval.

Supply, installation, testing and commissioning of MS fabricated outdoor unit CAGE for placing outdoor unit of VRV

8.08 MR system. The stand shall be manufactured from MS C channel of minimum 3-4 mm thick. It shall be finished with enamel nos 3 2,201.00 6,603.00

paint as per client/architect approval.

4.0 (a) WIRING

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V grade 1.5 sqmm & one run of

1.5 sq.mm FRLS insulated multistranded copper wires, in & including 25 mm dia , MS conduit surface/ concealed in wall

4.1 / ceiling conferming to IS 732 including all accessries such as junction boxes , conduit bends, elbows and ceiling rose ,

and anodised GI switch box with modular switch ,modular plate and the box covered with front plate

a 1.3.3 One light point controlled by one 6A switch Per Pts 9 1,213.00 10,917.00

b 1.54.3 Secondary light point controlled by same switch Per Pts 12 707.00 8,484.00

Wiring for circuit/ submain wiring alongwith earth wire with the

4.2 1.7 following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed steel conduit as required.

b 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per mtr. 40 229.00 9,160.00

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per mtr. 120 263.00 31,560.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated copper conductor cable

drawn through 25 dia MS conduit laid in surface/concealed over false ceiling or in slab/wall chases including ,2way

modular switches,modular plate ,suitable GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper

conductor single core cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections

but excluding modular plate etc. as required.

f 1.24.7 TV antenna socket outlet Each 2 119.00 238.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in

recess etc. as required.

4.7 1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine

tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and laying HDMI Cable with connector on both ends. As per approve make and direction of engineer in- charge

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess including painting in case

4.10 1.20 of surface conduit,or cutting the wall and making good the same in case of recessed conduit as required

5 (b) LIGHTING FIXTURES

supply, instollation, tecting and commisioning of SUSPENDED LINEAR LIGHT Ra90 24 W/MTR 2835 3000K /4500k/6000k LED

5.1 MR STRIP 3 SDCM with diffuser of 2m. Fixing clips (4 pcs) and end caps (4 pcs) included. W = Silver painted aluminium. Nos. 3 6,448.00 19,344.00

SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) downlights with maximum 18 Watt with

minimum 1980 lumen.The product should be SMD based & have non integral isolated driver with 2KV inbuilt surge

5.2 MR protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare Nos. 18 1,536.00 27,648.00

operating temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and external wire should have

PVC coated multistrand wires.

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-III) complete with

7.1 accessories such as bends, junction boxes, pull boxes etc., in recess or on surface including cutting chases in the

walls/floors and making good the same complete as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI Box in wall/furniture/floor complete as

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections

but excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 4 119.00 476.00

7.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring shuttered front access for

preventing ingress of dust, dimension as per commercially available modular office furniture.

Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including providing 3 mm thick stainless

steel cover as per specification.

GRAND TOTAL 1,795,087.63

GRAND TOTAL 1,795,087.63