Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAdmitted-Finance WZ 1043 C IIND FLOOR NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | ₹38.1 L | L1 | Admitted-Finance |
| 2 | L2₹38.6 L+₹54,567.86 (1.43%)Admitted-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | ₹38.6 L+₹54,567.86 (1.43%) | L2 | Admitted-Finance |
| 3 | L3₹39.0 L+₹90,818.36 (2.38%)Admitted-Finance RZB 96 B GF MAHAVIR VIHAR SECTOR 1 DWARKA NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | ₹39.0 L+₹90,818.36 (2.38%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | The new hut furnitures L2 | M/S AADI ENTERPRISES L1 | SHAKYA ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling Asbestos cement / GI (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. | 40 | Sqm | 19 ₹760 | 11 ₹440 Lowest | 19 ₹760 |
| 2.00 | Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed | 8.03 | Per Qtls | 99 ₹794.97 | 51 ₹409.53 Lowest | 199 ₹1,597.97 |
| 3.00 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and directed | 329 | Sqm | 9 ₹2,961 Lowest | 11 ₹3,619 | 29 ₹9,541 |
| 4.00 | S&F steel work in tubular / angle sections in trusses ,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed. | 105 | Kg | 69 ₹7,245 Lowest | 111 ₹11,655 | 99 ₹10,395 |
| 5.00 | S&F 0.50mm thick (total coated thickness) pre-colour, pre-profiled Galvalume sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed. | 40 | Sqm | 649 ₹25,960 Lowest | 691 ₹27,640 | 699 ₹27,960 |
| 6.00 | M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specifiecation including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:-
(a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25x25mm.
(b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners.
(c) S & F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders alongwith adjustable clamp to maintain level.
(d) S & F E-board ceiling tiles of size 595 mm x 595mm x 4mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE. | 329 | Sqm | 699 ₹2,29,971 Lowest | 711 ₹2,33,919 | 699 ₹2,29,971 Lowest |
| 7.00 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site,complete all as specified and directed. | 18 | Each | 49 ₹882 Lowest | 111 ₹1,998 | 99 ₹1,782 |
| 8.00 | Supply and fix Aluminium door with powder coated standard aluminium sections of medium size and weight not less than 1.50 Kg/Rm and conforming to catalogue of Jindal or equivalent. The door shall be of side hung type fixed at bottom with standard floor door spring, pintals etc. The bottom panel of the door shall be fitted with 12 mm thick prelaminated particle board decorated on both sides of approved colour and 5.0 mm thick tinted glass in top panel complete including all necessary fittings such as 02 Nos handles of approved size and shape, 02 Nos Aluminium anodised tower bolts 200 mm long and 01 No mortice lock per shutter. The shutter frame shall be with one or more rebates including jointing cleats, glazing clips, standard rubber beading complete all as specified and directed.
Note:- Floor door spring shall be measured and paid separately under relvant items of these schedule. | 23 | Sqm | 5,999 ₹1,37,977 | 4,441 ₹1,02,143 Lowest | 4,900 ₹1,12,700 |
| 9.00 | S&F Double action floor spring hydraulically regulated made up of min 1.25mm thick stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete. | 10 | Each | 1,699 ₹16,990 | 1,111 ₹11,110 | 900 ₹9,000 Lowest |
| 10.00 | Taking down PVC door shutter with PVC chowkats including all fittings area exc 1.00 Sqm but n.exc 2.00 Sqm all as directed. | 2 | Each | 49 ₹98 Lowest | 111 ₹222 | 99 ₹198 |
Tender Value
₹47.1 L
EMD Value
₹94,500
Closing Date
20 Aug 2026, 6:00 pmClosed
GE North Delhi Cantt-10
GE North Delhi Cantt-10
SPL REPAIR OF BLDG NO P124B INSTRUMENT SEC FOR BR AND EM WORK OF 505 ABW UNDER GE NORTH DELHI CANTT10
2026_MES_780413_1
GE/NORTH-92/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE NORTH DELHI CANTT10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE North Delhi Cantt-10
₹94,500
Yes
31 Aug 2026
23 Jul 2026
22 Aug 2026
23 Jul 2026
20 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling Asbestos cement / GI (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. | 40 | Sqm | - | - |
| 2 | Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed | 8.03 | Per Qtls | - | - |
| 3 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and directed | 329 | Sqm | - | - |
| 4 | S&F steel work in tubular / angle sections in trusses ,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed. | 105 | Kg | - | - |
| 5 | S&F 0.50mm thick (total coated thickness) pre-colour, pre-profiled Galvalume sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed. | 40 | Sqm | - | - |
| 6 | M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specifiecation including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:-
(a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25x25mm.
(b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners.
(c) S & F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders alongwith adjustable clamp to maintain level.
(d) S & F E-board ceiling tiles of size 595 mm x 595mm x 4mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE. | 329 | Sqm | - | - |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site,complete all as specified and directed. | 18 | Each | - | - |
| 8 | Supply and fix Aluminium door with powder coated standard aluminium sections of medium size and weight not less than 1.50 Kg/Rm and conforming to catalogue of Jindal or equivalent. The door shall be of side hung type fixed at bottom with standard floor door spring, pintals etc. The bottom panel of the door shall be fitted with 12 mm thick prelaminated particle board decorated on both sides of approved colour and 5.0 mm thick tinted glass in top panel complete including all necessary fittings such as 02 Nos handles of approved size and shape, 02 Nos Aluminium anodised tower bolts 200 mm long and 01 No mortice lock per shutter. The shutter frame shall be with one or more rebates including jointing cleats, glazing clips, standard rubber beading complete all as specified and directed.
Note:- Floor door spring shall be measured and paid separately under relvant items of these schedule. | 23 | Sqm | - | - |
| 9 | S&F Double action floor spring hydraulically regulated made up of min 1.25mm thick stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete. | 10 | Each | - | - |
| 10 | Taking down PVC door shutter with PVC chowkats including all fittings area exc 1.00 Sqm but n.exc 2.00 Sqm all as directed. | 2 | Each | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Gen92.pdf
Tender Documents • 1.35 MB
BOQ_874236.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .