ADDN/ALTN OF BLDG NO C-17 AT VIJAY DURG UNDER GE(VD) KOLKATA

(B/R PORTION ) Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and directed.

Supply and fixing factory made uPVC white colour Sliding window Three track , made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for 1st class hard wood ,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints specified and directed.

M&L for 1st class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density , wood particle board with commercial face veneers: supplied and fitted to chowkats and rebated bolection moul ded bead is pro vided and planted round the panels (Each side of panel)

M&L for applying two or more coat of french polish including preparing, claening the new surface and applying wood filler on new wooden surfaces of any description over 10cm width or girth complete all as directed by Engineer-in-Charge.

S&F hold fast for window &doors, made to shape as required complete all as specified and directed.

S & F 200 mm long Brass Finish anodised barrel tower bolt of extrued section complete all as specified and directed.

S&F 300 mm long Brass Finish anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy complete all as specified and directed.

S&F in repair classic Cylindrical lock made of brass complete all as specified and directed.

S&F 100 mm brass finish long butt hinges medium weight cold rolled complete all as specified and directed.

S&F 5.5 mm thick toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed,

S & F solar control film 25 micron reflective type (garware sun control or equivqlent ) complete all as specified and directed .

S&F for 12mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Dismantling Structural Steel Work including Doors, Gates , M/S Grills in boundary wall etc but excluding Framed Truss etc. complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for brick work with flyash old size bricks straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of stone slabs , floor and wall tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge.

M&L 18-20mm thick granite slab in window cills, cooking platform , steps of stair case etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge

M & L for Virified digital Ceramic tiles light / Dark shed Double charged / ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, (1200 x 600 mm ) / (1200 x 800 mm ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed by Engineer-in-charge.

M&L anti- skid digital , full body, homogeneous Vitrified tiles Matte finish (in any shade ) 8 to 10 mm thick Size of tiles shall not be less than 1200mm x 600mm , in floor / skirting / dado etc jointed and pointed in neat cement slurry with white or coloured to match including over 15 mm thick screed bed CM 1:6 completed all as directed.

M&L for colour polished vitrified ultra charged tiles for vertical surface 1200 x 600 mm, 8 to 10 mm thick thick set and jointed in 10 mm thick layer of suitable tilofix adhesive , coverage area of adhesive approx 8 kg per sqm over finished surface of wall and complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified.

M&L 5 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:3 complete all as directed.

M&L for rendering 15mm thick (10+5 mm) on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed. (Top layer mixed with water proofing compound) (WPC shall be measured seperately)

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil complete all as specified and directed.

Returning,filling in, including,spreading,levelling,watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed.

Removing excavated material exc.1.5km but n.exc.5km and depositing where directed.

M&L RCC 1:1½:3, type A1 (using 20mm grade stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M & L for RCC 1:1½:3, type A1 (using 20mm grade stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in floors Slabs, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L for RCC type A1 (1:1½:3) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)

M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L Mild steel TMT bars 6mm and 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed.

Use and waste of from work to sides of concrete for foundations, Fottings,bases of cols and Plinth beams and similar work for rough finished surfaces complete all as specified and directed.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns for rough finished surfaces complete all as specified and directed.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M&L preparation of new wall surfaces and applying two coat of plastic emulsion paint over a coat of primer and 2 mm thick wall care putty all as specified.

M&L preparation of new ceiling surfaces surfaces and applying two coat of plastic emulsion paint over a coat of primer and 2mm thick wall care putty all as specified.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required,from ground floor to third floor complete all as specified and directed.

Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100 mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(upto 4 th storey).

Material and labour of CI (spun) Bends (any radious) complete all as specified and directed

Material and labour of CI spun Cowl for 100 mm bore pipe complete all as specified and directed.

Material and labour of CI (spun) Branch pieces, singel (any radiousequal or unequal) for 100 mm bore pipe complete all as specified and directed.

Taking up GI water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings, segregated and stacking the pipe complete all as directed.

All as per item No 49 here-in-before but 20 mm bore.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

All as per item No 51 here in before but 20 mm bore.

Supply and fixing in repair 35mm dia gold line curtain rod alongwith decorative brackets and supporting and rings at a gap of 4" (Make : Vista sher wood) glass fixed with necessary beading complete all as specified and directed.

S&F in repair aluminium door closer hydraulically regulated designation No.3 universal type suitable for door shutter of 851 to 1000mm in width and of weight of 61 to 80 kg (Aluminium (extruded section) body ) complete all as specified and directed.

S&F Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one complete all as specified and directed.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per anufacturer's instructions complete all as specified and directed.

S & F Continuous (piano) hinges,SS, bright finish or electrogalvanised, width of flap 30 mm complete all as specified and directed.

S&F brass handel 150 mm long decorative type complete all as specified and directed.

S&F multi purpose cupboard lock complete all as specified and directed.

S&F cupboard magnets heavey duty complete all as specified and directed.

M&L Steel work in rail straight or curved including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10.cm long complete all as specified and directed

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed

Mild steel bolts dia of neck exc 16 mm but n. exc 20 mm. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed

Material and labour for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for .(upto 04 storey High of building)

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface surfaces of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for any height of the building complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for any height of the building complete all as specified and directed.

S&F for liquid water proofing compound complete all as specified and directed

S & F cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.

M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed.

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building).

S&F CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge.. (upto 04 storey High of building).

S&F in repair fancy type CP Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115 mm Long Bend Pipe, Connecting Legs &Wall Flange (without Hand & Overhead Shower) screwed for iron pipe including taking down old and all as specified.(Make : Jaquar Cat No. KUP-35125PM or equivalent make specified in tender.

S&F in repair 15 mm angular stop cock chromium plated with wall flange as all as specified.(Make : Jaqur cat no- KUP-35053PM or equivalent make specified in tender.

S&F in repair Concealed Stop Cock Regular Body Suitable for 15mm Pipe Line with Spindle Extension & Plastic Protection Cap (without Exposed Parts) and Exposed Part Kit of ConcealedStop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal complete all as specified and as directed. Make : Jaqur cat no- ALD-83 and KUP-35083KPM or equivalent make specified in tender.

S&F In repair CP Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and as directed. (Make : Jaqur cat no- ALD-769L300x190 or equivalent make specified in tender.

S&F in repair CP waste coupling 32mm bore full threaded complete all as specified and as directed. Make : JAQUAR cat No. ALD-705L130 or equivalent make specified in tender

S&F in repair chromium plated Toilet Roll Holder with Stainless Steel Flap complete all as specified and as directed. Make : Jaquar Cat No: ACN-1153S ) or equivalent make specified in tender

S&F in repair Towel Ring Round with Round Flange complete all as specified and as directed. Make : Jaqur cat no- ACN-1121BN )(Chrome) or equivalent make specified in tender

S&F Chromium plated Single Lever Basin Mixer with Popup Waste with 450mm Long Braided Hoses fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed. Make- Jaquar Cat no-KUP-35051BPM or equivalent make specified in tender

S&F in repair 15mm bore two way bib cock with wall flange chromium plated complete all as specified and as directed. Make : Jaqur cat no- KUP-35041PM ) or equivalent make specified in tender

S&F in repair 15mm bore bib cock with wall flange for 15mm bore pipe chromium plated complete all as specified and as directed. Make : KUP-35037PM) (Chrome) or equivalent make specified in tender.

S&F in repair 15mm dia Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube and Wall Hook with N.R.V (Back Flow Preventer) complete all as specified and as directed. Make : JAQUAR Cat No.ALD-579 . (chrome) or equivalent make specified in tender.

S&F in repair Soap Dish (Polycarbonate) complete all as specified and as directed. Make : jaquar) Cat No. AQN-7733 (chrome) or equivalent make specified in tender.

S&F in repair Soap Dispenser with Glass Bottle complete all as specified and as directed. Make : jaquar) Cat No. ACN-1135N (chrome) or equivalent make specified in tender

S&F in repair tumbler holder complete all as specified and as directed. Make : jaquar) Cat No. ACN-1141N (chrome) all as specified

S&F in repair robe hook complete all as specified and as directed. Make : jaquar) Cat No. ACN-1191N (chrome) or equivalent make specified in tender

S&F in repair towel rack with lower hanger and hook 600mm long chromium plated complete all as specified and as directed. Make : Jaquar cat no- AQN-7781 ) (Chrome) or equivalent make specified in tender.

S&F in repair Special designed glass shelf of size 600mm with CP wall flange complete all as specified and as directed. Make :Jaquar cat no- AKP-35771P or equivalent make specified in tender

S&F in repair corner glass shelf incl takingdown old one complete all as specified and as directed. Make : Jaquar cat No CPA-1173 or equivalent make specified in tender .

S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge. Make: Jaquar -ALD-803AB,ALD 805 AB or equivalent make specified in tender

S&F in repair vitreous china floor / wall mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. Make : JAQUAR, Cat No: OPS-WHT-15853S300UF or equivalent make specified in tender

S&F Shower panel of size not less than 1600 x 230 of shiny chrome finish adjustable body jets with functions like rain , casacade rain , body jets , chrome finished hand shower of 1.50 met flexible hose and Thermostatic mixer with diverter function for precise water temperature all as specified and as directed. Make- Jaquar - SHP-SSF-ST8896 or equivalent make specified in tender

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 15 mm thick in Cement Mortar 1:4, finished even and smooth and cured for 07 days by Ponding of water over Roof. (b) Preparing fully dried plastered surface as per IS:3067-1966, for further treatment. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.3 Litre per Sqm. (d) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (e) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.

(E/M PORTION) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed.

All as per item 101 above but using one 3/5 pin socket outlet, 5 Amp independent

All as per item 101 above but using one 3/5 pin socket outlet, 5 Amp on the same board with other switches

All as per item 101 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuty wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches complete all as specified and directed.

All as per item No 101 above but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4.0 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Bell push 6A, 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 2 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and directed.

S & F Modular type White cover plate with frame 8 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 1/2 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 6 module complete all as specified and directed.

S & F Modular type Metal Flush box 8 module complete all as specified and directed.

S & F Modular type Metal Flush box 12 module complete all as specified and directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

S & F in repair Recess mounting LED 15 Watt , 25000 Hrs Life Smart Wi-Fi LED Celing Lamp Downlighter Wiz Connected (Shades of White+Dimmable + Pre -Set Mode) complete all as specified and directed.

S&F in repair picture LED lights with color temperature 3000 K suitable for 10 W metal and synthetic material lumen 500 lm Model: 48043/30/86 Make: Philips or equivalent of havells complete all as directed.

S & F in repair LED wall mounted spot focusing light fitting 9 above watt, colour temperature 2700K, mounted on wall / ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed. Make: Philips Cat No 56240/31 or equivalent model in other make specified in tender

S & F LED decorative Wall lights fitting 4 W x 2, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable E-14 LED 4w X2 complete all as specifide and directed. Make: PHILIPS 32033/11/66 Aquafit wall light(Chrome and Metal,12W)-DC or equivalent make specified in tender.

S&F in repair adjustable bed side LED lamp with clear lens with color temperature 3000 K suitable for 3 W metal and synthetic material lumen 150lm complete all as specified and directed. Make: Philips, WBR-CHR-MB12021192A JAGUAR or equivalent make specified in tender.

Supply and fixing water Heater Storage type BEE 5 Star rated of capacity 25 Litre,Power Rating of 2000 Watt, Maximum Water Temperature 75 degree,Rated Pressure 0.8Mpa having Glass enamelled Coating inside Tank (Minimum thickness 0.2mm) and mild steel tank of thickness minimum 1.8mm after taking out old unsv geysers as directed by Engr-in-Charge, Make: Havells (Model No-BIANCA 25L)/Jaguar (Model No ERICA MANUAL 25LTR)/CROMPTON (MODEL NO-Solarium Qube IOT) or equivalent make specified in tender. Note: Contractor has to submit Minimum 7 years warranty on Tank,4 years warranty on Heating Element,2 years warranty on others components from OEM

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-caping of suitable size, surface type all as directed.

All as per Srl. Item No. 132 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No.132 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site.

Supply, Laying and testing 50 Sqmm 3.5C of XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall with saddles/Flat iron clamps as per site requirement /passing through pipe/pole complete all as specified and directed.

S & F TP&N Vertical Loadline Dbs are fitted with Bus Bars, Neutral Links, Blanking Plates 4 way double door DB LL 4W DD VERT With 120-160amps MCCB complete all as specified and directed

S & F MCCBs 415V, 16KA, 4 Pole 100Ampscomplete all as specified and directed.

S & F Double door sheet metal enclosure for DBs(Premium range) for mounting of MCB for 240 Volts 8 Way with 100 Amps rated copper bus bar,single pole and Neutral complete all as specified and directed.

S & F Double door sheet metal enclosure for DBs(Normal range) for mounting of MCB for 240 Volts 8 Way with 100 Amps rated copper bus bar,single pole and Neutral complete all as specified and directed.

S & F Sheet metal enclosure for TPN DB IP 43 Protection double door (Normal range), 415 volts 4way (8+12) with 100 Amps copper bus bar for each chase complete all as specified and directed .

Supply only MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply only MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

S & F in repair AC short circuit protection motor starter 20 Amps capacity AC 230 Volt (4module + 2 module = 6 module requrment at site) complete all as specified and directed.

S&F in repair metal clad single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp,240 Volt,complete all as directed .

S&F LED post top luminaire, 20-30 Watt, with die cast aluminium spigot, spun aluminium powder ,Heritage type coated top cover, with high power LED, IP 65 grade protection, designed with indirect symmetrical light distribution, with integrated constant current electronic driver incl taking down existing luminaire complete all as specified an directed. (Make : SURYA, CAT NO: SLE PT 30W-HARY / CGL-LPTH-20-WW/ JAGUAR CAT NO-LGTP02X030XW or equivalent model in other makes specified in particular specifications) NOTE: Wire for connection of luminaire shall be measured and paid separately.

S&F LED Up down wall light in die cast aluminium housing with high quality toughened glass cover IP 65,), including suitable connecting up with three core flexible copper conductor cable of suitable size, as in repairs, complete all as specified and directed. (MAKE : SURYA Cat No SLE WL15W UP-DOWN / HAVELLS CAT NO-C LYCUS LED SPIKE LIGHT LYCUSSP S9W LED 730PSYMLIOWLS15WLED830PSYMTOTG/ JAGUAR CAT NO- 460LL9X2H.NHG or equivalent model in other makes specified in tender)

S & F BLDC ceiling fans of 1200mm sweep with class F copper insulation for winding ,canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed. Make: Havells(Model:Efficiencia DX BLDC,SKU Code-FHCEO5SWHT48)/Atomberg (Model:IKANO)/Crompton(Model:Groove Plus) or equivalent model in other makes specified in tender)

S & F exhaust fan 250 mm sweep, AC single Phase 230 / 240 volts, Plastic body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia ,nut bolt and accessories, and winding,pending etc connecting up including taking down with re -fixing provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

Please Enable Macros to View BoQ information