Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC 3838 2ND FLOOR SECTOR 46 C CHANDIGARH UT 160047 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160047 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹10.4 L+₹87,250 (9.17%)Rejected-AOC 546 14 JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L2 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹11 L
EMD Value
₹22,000
Closing Date
17 Nov 2022, 6:00 pmClosed
GE JUTOGH
GE JUTOGH JUTOGH CANTT SHIMLA (HP) - 171008
REPAIR/ MAINTENANANCE OF LT ELECTRIC SUPPLY NETWORK, SECURITY LIGHTS AND SOLAR LIGHTS, DG SETS ALONGWITH CONNECTED ITEMS AT JUTOGH, KUFRI, SANJAULI AND KELVIN GROOVE UNDER GE JUTOGH
2022_MES_559006_1
GE/JUT-46 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
JUTOGH
CLASS E CATEGORY b (i)
6 documents required · 6 mandatory
₹500
GE JUTOGH
₹22,000
Yes
15 Dec 2022
20 Oct 2022
19 Nov 2022
20 Oct 2022
17 Nov 2022
3 Nov 2022
Amount
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose/soft soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and directed.
M & L for sand cushioning for cable with river washed sand and punning to provide required cover as per SSR part I complete all as specified and directed.
Supplying and laying bricks common burnt clay sub class 'B' old size for cable protection complete all as specified and directed.
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and directed.
Supply , Fixing & laying GI tubing light grade 80 mm dia for road crossing along with pole/culvert /drainage for mechanical protection of cable complete all as specified and directed. Note: All items and accessories , bend, joints, nut bolts, clamps etc are incl in quoted rates.
Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and directed. Note: Old cable may different size and length and credit will be given as actual obtained from site.
Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 35 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. Note: (i) Earth work, removing, returning filling and pipe will be measured and paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
All as per Ser Item No 08.00 here in before but for 120 Sqmm, 3.5 core complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) or road cutting complete all as specified and directed.
M&L for PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in filling demolished surface or as leveling course or in foundation or under tiles or in any required work and make surface clear complete all as specified and directed.
S&F in replacement MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, adjustable overload setting , adjustable short circuit setting with double break contacts with spreader and phase barrier complete all as specified and directed.
S&F in replacement MCCB 250 Amps, 4 Pole , 415 Volts, 35/36 KA, overload adjustable short circuit adjustable type incl complete all as specified and directed.
S&F in replacement MCCB 4 Pole 160 Amps , 415 Volts, 25 KA, overload adjustable short circuit fixed type incl complete all as specified and directed.
S&F in replacement of LED street light fittings of 60-62 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection of up to 5kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed.
New dehydrated Engine/lubrication oil as per required grades suitable for 100 kVA to 630 kVA DG Sets & Fire diesel engine of complete all as specified and directed.
Inhibitor corrosion , antifreez / Coolant suitable as per requirement for 100 kVA to 630 kVA DG sets & fire diesel engine complete all as specified and directed.
S&F in replacement maintenance free battery 12V 180 AH, incl dismantling and taking down old unser batteries complete all as specified and directed.
S & F fully integrated all in one Automatic light (Inbuilt Mono/poly crystalline panel SPV module 40 Wp and inbuilt LiFePO 4 battery ) Luminaire wattage 12 watt, system voltage 12 volts, Lumen per watt >125 , battery type LiFePO04 ( 12.8 V & 13/14 AH), IP66, colour temperature 6000K-6500K, incl taking down old unser and complete all as specified and directed. Model No AIO-15 of Systellar or Certified by govt approved lab or certified by CE.
S & F semi Integrated two in one Automatic light (Inbuilt LiFePO 4 battery ) Luminaire wattage 12 watt, system voltage 12 volts, Lumen per watt >125 , battery type LiFePO04 ( 12.8 V & 13/14 AH), IP65, colour temperature 6000K-6500K incl taking down old unser and complete fixing and connection complete all as specified and directed. Make: Approved from Ministery of New and Renewable energy or Certified by govt approved lab or certified by CE.
Servicing of DG Set (Make: Cummins) of capacity 630 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc. and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump , cleaning oil sump and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under relevent items as supply only. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.
Supply Only lubrication Oil filter with seal/ gasket / ring suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.
Supply Only Fuel filter with gasket suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.
Supply Only By Pass fuel filter with gasket suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.
Supply Only Element air cleaner(Air filter) inner and outer suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.
Supply Only Fan belt set suitable for 630 kVA DG Set (Cummins) complete all as specified and directed.
Repair, maintenance and cleaning of radiator of DG set (630 kVA) incl dismenteling and taking down carefully, draining and refixing after repair incl cleaning, repairing , soldering , brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.
Servicing of DG Set (Make: Mahendra) of capacity 100 kVA ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump and cleaning oil sump,and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after as supply only. However, labour charge are deemed to be included in item rate above. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.
Supply Only Lub Oil filter with gasket suitable for 100 kVA DG Set complete all as specified and directed.
Supply Only Fuel filter with gasket suitable for 100 kVA DG Set complete all as specified and directed.
Supply Only By Pass fuel filter with gasket suitable for 100 kVA DG Set (Cummins) complete all as specified and directed.
Supply Only Element air cleaner (Air filter) inner and outer suitable for 100 kVA DG Set complete all as specified and directed.
Supply Only Fan belt set suitable for 100 kVA DG Set of any type any make complete all as specified and directed.
Repair, maintenance and cleaning of radiator of DG set (100 kVA) incl dismenteling and taking down carefully, draining and refixing after repair incl cleaning, repairing , soldering , brazing etc complete all as specified and directed. Note: Coolant will be measured and paid separately.
S&F in replacement of high pressure rubber hose pipe upto length 1.2 mtr and required dia as per sample incl clamp/nuts and other connecting items suitable for 100-160 kVA DG Set (Mahendra) incl dismantling and taking down old unsv complete all as specified and directed. Note: Old parts will be diposited to MES store yard.
Servicing of diesel fire pump (Make: Kirlosker) of capacity 90 BHP ,checking entire system as per manufacturer's catalogue such as checking all parts for serviceability, taking down defective parts such as fuel filter assembly, by pass filter assembly, lube oil filter assembly, air cleaner assembly etc and replacing the same with same size, make and capacity of parts, Cleaning all the serviceable filters and draining out the old used engine oil from the oil sump and cleaning oil sump,and refilling new engine oil of required grade up to required level and including checking of control panel, tightening of loose connections and testing to DG Set to the entire satisfaction of the Engineer-in-Charge. Note : (i) Minor items like nut, bolts, lugs , cloths , cotton etc are incl in quoted rates. (ii) Spare parts/Engine oil / filters shall be measured and paid for separately under successive items here-in-after as supply only. However, labour charge are deemed to be included in item rate above. (iii) Minimum 6 months gap/200 Hrs of run whichever is earlier shall be considered for next service. (iv) Each service will be measured and paid separately.
Supply Only Lub Oil filter with gasket suitable for fire pump set complete all as specified and directed.
Supply Only Fuel filter with gasket suitable for fire pump Set complete all as specified and directed.
Supply Only Element air cleaner(Air filter) inner and outer suitable for fire pump complete all as specified and directed.
Supply Only Fan belt set suitable for fire pump complete all as specified and directed.
Repair, maintenance and cleaning of radiator of fire pump incl dismenteling and taking down carefully, draining and refilling coolant incl cleaning, repairing , soldering , brazing etc complete with the help of proper cleaning agent and wire brushtesting and refilling complete all as specified and directed. Note: Coolant will be measured and paid separately.
M&L for De-scaling, cleaning of hot water tanks , heat collector, pipes etc with suitable agents incl mixing of anti freezing agent of solar heating system of capacity 1500 LPD complete all as specified and directed.
M&L for De-scaling, cleaning of hot water tanks , heat collector, pipes etc with suitable agents incl mixing of anti freezing agent of solar heating system of capacity 500 LPD complete all as specified and directed.
M&L for repair of Solar water heating panel incl replacement of unser toughened glass , brazing of leaked copper pipes and repair of unsv minor parts incl de-scaling with suitable agents incl mixing of anti freezing agent of solar heating system of capacity of 100 LPD with testing and proper functioning of panle complete all as specified and directed.
M/S kuldeep kumar khullar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .