Interior works at PHQ, New Delhi

Repairing existing grid false ceiling, including careful dismantling and removal of damaged ceiling tiles and grid members, supplying and fixing new matching 600 × 600 mm ceiling tiles, replacing and/or repairing main tees, cross tees, suspension wires and wall angles wherever required, re-levelling, aligning and making the entire grid system true to line and level, refixing and reinstating electrical, fire-fighting and HVAC fixtures disturbed during the work, and disposing of all dismantled materials and debris outside the premises, complete as per the directions of the Engineer-in-Charge.

Providing & Fixing in position Acoustical Panelling made from 12 mm thick plain gypsum panels on aluminium frame of size 50 mm × 20 mm, spaced at 600 × 600 mm c/c, having required aluminium supports from wall of required length, in front of 1000 GSM synthetic wool, 50 mm thick, with chicken mesh on wall side, including cost of required cut-outs, decorative mouldings / finishing items / paint and scaffolding, as per Architectural & Acoustical Design and Instructions, complete in all aspects, including all materials, labour, finishing, etc., complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth, complete.

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.)

Providing and fixing glass partition using 12 mm thick clear toughened safety glass, conforming to IS: 2553 (Part-1) / relevant IS standards, fixed in position with approved aluminium / stainless steel framing system, including top, bottom and side channels, EPDM / neoprene gaskets, seals, silicon sealant, L-patch fittings, connectors, clamps, necessary brackets, screws, fasteners and all accessories complete. The work shall include cutting, drilling, edge polishing, fixing, alignment and levelling of glass panels, provision of required cut-outs for fittings, proper sealing at joints and edges, and making good the surfaces disturbed during installation, complete in all respects as per architectural drawings, specifications and directions of Engineer-in-Charge. Rate shall include all materials, labour, tools & plants, scaffolding, handling, transportation, fixing and finishing, complete.

Providing and fixing 2.5 mm thick homogeneous PVC flooring / PVC carpet of approved make and shade, suitable for laboratory use, over a smooth, even and prepared surface, including thorough cleaning of base, application of approved primer and self-leveling compound wherever required, applying approved adhesive as per manufacturer’s specifications, laying the PVC flooring sheets/tiles true to line and level, neatly cutting and finishing edges, making joints smooth and invisible, rolling with heavy roller to ensure proper bonding, and providing skirting of matching PVC flooring up to the required height, complete as per directions of the Engineer-in-Charge

Providing and fixing 12mm toughened glass door with required fixtures and fittings like floor mounted spring, Handles and frosted films matching with existing pattern etc. completed