Construction of Car Parking near Hand Pump bye pass road Jiwnoo Colony (SH Column Footing and slab at road level) Phase II Balance work in ward No 27 Kasumpti under Shimla Smart City Mission

Amount

Providing from work with steel plates 3.15 mm thick welded with angle iron in frame 30*30*5mm so as to give a fair finish including centring , shuttering and propping etc.with wooden battens height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu -reinforced concreate & plain concreate work in:-. Foundation , footing basis of coulmn etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs ,landings and the like Floor etc. up to 200 mm in thickness

Coulmn , pillars , post and struts:-

Beams , cantilever , grinders and lintels:-Sides and soffits of beams beam haunching cantilevers , brssumers and lintels not exceeding 1 metre in depth in all heights from floor

Vertical surfaces such as walls partition and the like including attached pilasters buttresses plinth and string courses and the like.

Providing and laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth with in all leads , lifts of materials and other incidentals.

Providing and laying cement concrete 1:1:2 (1 cement : 1 sand :2 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement in reinforced concrete work in : Suspended floors roofs, landing and shelves and their supports , balconies, beams, griders, bressumers and cantilivers upto floor two level.

Walls (any thickness but not exceeding 0.1 metre thickness) including attached pilasters, buttersses, plinth and string. Concrete etc. from top of foundation level upto floor two level.

Lintels, beams girders bressumers and cantilevers up to floor two level :

Column, pillars, posts and struts upto floor two level :

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete up to floor two level:

Random rubble masonry/polygonal rubble masonry (Uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls.

Steel work welded in built up sections,trusses and framed work,including cutting,hosting,fixing in position and applying a priming coat of red lead paint.In beams joists channels,angles,tee,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

PRAHLAD SING NEGI

Mandeep Thakur